Day 36 I guess I can call it bloom. Nice strong pistils shooting all over. She is the tallest so far making me raise my lights a little more. Day 38 Now Californian Snow is the tallest :) Ztrawberry stopped at a perfect height, it looks like she's gonna develop into a beautiful lady. Fat white pistils all over 😻 Day 39 Happy girl got 2500ml cm bg bb bh 6.3ph ~1EC She is perfect, symmetrical, stopped stretching at about 50cm, flowers are mostly leveled, branches are strong, leaves point up unless I water. I think she's also turning purple. Beaut 😻 Day 42 I think I saw some burnt tips but she still looks super happy and healthy. The most vigorous plant I've had.

Week 5 and it's all good. Day #32 Watered with just 0,5 ml/l of Fish Mix. I used it to spray on the leaves too. One of the 5 clones died because one night I removed the cap: just don't, is way too early. These days are rainy so drying time is slow. I'm going to switch to Bio Grow and setting 12/12 light schedule in the next 5 days. Day #34 Not deep watering yet, just sprayed leaves with Fish Mix then both mothers with a sip of leftover solution for each. The clones that I took just as a try seems to be healty. I don't know what to do with them :) Day #35 Watering deep with pasta water with BioGrow in. Defoliated a bit. Day #36 I see some slight curling and yellow tip on a mother plant so next round I'll water with just a bit of magnesium.

Day 56 Happy 8 weeks, Fiona! Still the easy going plant everyone wishes for :) I am pretty sure I can see first signs of flower. So one week after switching to 12-12, we are in (very) early flowering. Day 58 Well, I am running out of space 😅 My Scrog-Screen is bursting and I am really happy I have been using it because this Green Princess Fiona is BIG in every aspect (I guess this is what a long veg does with them 😍). From now on, I‘ll only use LST to adjust height differences but no more Scrogging. I‘ll defoliate her soon (probably towards the end of the week). Day 61 Decided to make perfect use of home office and defoliated Fiona. Also fed her 2.5l with half the recommended dose of nutes. Day 62 She looks happy! Doesn‘t seem to care about the leaves she lost yesterday. I‘ll give her another day rest before one final round of LST tomorrow 👑

Top dressed for the last time. Fed some compost tea and now smooth sailing ⛵️

A wonderful genetic thank you Fast Buds ❤️‍🔥🤩 The trim was super easy the buds are FAT & FROSTY full of resin 🤤 I’m very happy with the harvest 96g !! For the light i’ve used the Spider Farmer SE-7000💡

today with more experience. I see that I made some mistakes, about nutrients and some techniques, but as I repeat this was my second crop. it did not yield as much income as it should, but it was worth it, cultivating and learning.

🚀 4 clones de Blueberry Pie F1 Fast seleccionados por @stacksfarmsltd - https://www.instagram.com/stacksfarmsltd 🚀 Breeding by @seedsmangenetics - https://www.seedsman.com/eu-en/blueberry-pie-f1-fast-feminised-seeds-sman-blpi-fast-fem 💦 BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ @biotabs_official 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE @promixmitch @promixgrowers_unfiltered 💡2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp

👍elle est robuste super facile de travailler avec

The experiment is going good in my opinion she’s stretching out a bit and got about four or five nodes on each of her main branches I moved her in her own tent cause she is going to be to wide in there with my other chicks I got her under a viper spectra 100 watt light in the other tent she wasn’t getting the light she needed cause she was pushed off to the side but she’s good now got her own and should really take off now I’m excited to see how it goes until next time happy growing peace I trimmed a lil bit and took some pipe cleaners and tied the four branches down she trying to grow outwards just need a lil direction and her other nodes tied down so far so good if you shop fast buds use my discount code #kygrow get a 15% discount on the whole store and it’ll help me out too peace

A little late to this party. Day 49 the flowers entered stretching which I then switched over from fert-I-lome 5-1-1 to Neptune Rose and Flower.

June 12, day 84, not many leaves left to remove from the upper canopy. The Euforia's buds continue to slightly increase in size, but at this point it is mainly ripening. With the greater light penetration some middle/lower buds are also putting on weight. The PPFD is roughly 700 for the canopy so the light close to it's healthy maximum. I noticed two fungus gnats in the tent which is not a big issue this late in the grow. Just to be careful I ran a fertigation cycle with h202 instead of enzymes to kill any larva in the coco. June 14, day 86, uploaded a video of the trichomes to record their development across various buds. June 17, day 89, I removed some more leaves allow more ripening of lower buds. The trichomes are getting about 5-10 percent amber, and the buds are looking pretty ripe overall. I am going to draw down the nutrient EC over the next week, and then prepare the plant for harvest. I am currently guessing the harvest will be around day 100.

Another week in the books, one maybe 2 more to go, if the weather holds and humidity doesn't go crazy. Since grow diaries doesn't support more than 32 weeks, it's a bit of a pain to track the rest of this grow. Still I will post updates.

couple more weeks and shes ready for harvest.

73 Day 10 Weeks to Harvest

COMING SOON!! FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA PROMO CODE: rocknroll https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......