7cm of vertical growth this week. Things slowing down a little. This kush is very bushy. It's a huge plant, and if I'm honest the 10 litre pot is way too small 😲 On she goes through flowering! 😍

Unfortunate Week... Honey cream had a couple of "budrot" spots forming due to droplets of water dripping into the flower and not drying (99%humidity nights)... Thankfully those buds were cut down and she doesn't seem to be producing any more "budrot".. Apart from that, the smell is amazing on her. Power Flower is going nicely too, but seems to not have too much smell...

Getting tasty

ok so this plant, im not sure when im going to need to harvest this. just like my gorilla glue, this started flowering early, and before i noticed since this is my now second plant ever to harvest. and really i still feel like its my first i didnt take anything away from my gorilla glue and i was really unhappy with the product i didnt know when to harvest it so it smells like nutes not bud. so if anyone has some suggestions on what i should do for harvest and when id appreciate it. im going to start flushing it the next couple of feeds so i can prevent the nute smell i got.

ALL THE PHOTOPERIODS ARE IN THE 8X8 NOW. DID SOME MAJOR DEFOLIATION BECAUSE THEY ARE TOO BIG NOW. THEY ARE SWITCHED TO FLOWER AND THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

Hi everyone :-) This week the buds developed super ;-) All are beautiful 😍. Super genetics 👍. Blue Cheese pheno 1 is slowly coming to an end :-) This week I will start to use up the remaining nutrients and harvest in 10-14 days ;-) Everyone else needs something else :-) have fun with the videos, stay healthy 🙏🏻 and let it grow 🌱

so much rain this week. Welcome to the rainy season . Her second week of flowering I await the seeds to mature before harvesting. Hopefully she makes it through the 4 days of rainfall ahead.

BB2 and GG2 seem to be about a week ahead of the other two. Those two showed the deficiencies. Seems to have quite a few bud sites. About the same watering and fertilizer routine as previous week.

tomorrow defoliation

2026-06-04 I barely can enter the room, so i made aroom video The room started with 7 Plants, now 4 are reaming into the room they are thriving in all possible directions growing very vigour Setup & Method The plants are growing in an Autopot system using the Biotabs "just add water" strategy. Setup process: 1. Mix in Startrex 2. Add Silicium Flash 3. Add Biotabs tablets 4. Add Mycotrex 5. Water with Bactrex This turns any soil into a living, active growing medium. Combined with Autopot, it acts as a cheat code for effortless growth — resulting in large, healthy plants with an excellent and flavorful end product. Feeding & Maintenance Plan • Refreshing mycorrhiza and microbes with Mycotrex and Bactrex • Applying compost tea to all plants • If any deficiencies appear: top-dress with Silicium Flash • Continuing the "just add water" strategy otherwise

End of week 7 in bloom (photos and videos are from day 49) and things are going well so far. I have some yellow leaves in the buds, that i have to remove tomorrow. I water every 4 days and i topped up the pots with soil yesterday. Colas are getting thick and fat and for sure are tall! Depending on their position in the tent, colas are from 35 to 70 cm in heght. In terms of quantity, i think i have about 80-90 big colas in the 2,2 square meters tent so it is possible to achieve an outstanding harvest! We will see!

Buds

Week 5

4/3 - she is taking her sweet ass time gaining height and I'm getting bored with this grow at this point. I'm going to defoliate every other branch completely to the top to see how those differ from the ones that I leave more or less alone from this point forward. She is taking on a lot of water, every other day is a must.for? 4/6 - she got fed yesterday and needed more water today, she's showing a tiny bit of nutrient burn so I will be keeping it easy for a bit, I also chopped a lot of foliage out. Only the tops left and preflowers showing everywhere 4/8 - thirsty lady 4/9 - more water! Added cal/Mag, 6.2ph now, she's got something going on

its been a hot dry week but the girls have fared it well. mound design and soil content have helped keep moisture in the root ball of the plants. Hopefully we get some rain this week otherwise im going to be spending a day just watering them. fingers crossed for rain. We need a rain dance here.

New Week, new tent, light & pots Just placed them in a Mars Hydro 120x60x180 tent with the Mars Hydro TSL2000 Repotted in 5L pots with PLAGRON light mix & 2 of them (far right + in the back/the bad ones) are not performing that well so they got PLAGRON growmix to give them a boost. The plant in the back seems to have a broken ,top leaf’ - no parasite/intruder in sight… 3 in the front left are performing very well, let’s give them 5-7 days to root properly, than they can get big. Always using hand warm water when feeding + a heat mat for the night for the first time wich don’t seem to make a difference to previous runs (strangely enough) @ night it‘s about 16/17 degrees in the room. The bottom of the box is polstered with foam mats for ,isolation‘. Big pots in the back are just experiments with Studio54 + Rainbow Gelato cuts from another run here.

Leicht entlaubt und etwas gebogen... leider ist mit einer der Seitentriebe beim biegen am Ansatz angerissen. Ca. 2/3 sind ab... Das wird jetzt der Härtetest. Habe den Ast nur stabilisiert, aber die Wunde offen gelassen. Der Ast ist vermutlich tot... mal sehen wieviel ca. 1/3 vom unteren Astansatz noch leisten kann...