Me encontre con un par de cogollos afectados de Botytris en las Psicodelicias, y opte por cortarlas. De todos modos ya estaban casi listas, asi que no ha sido mayor problema. Pero hago notar que las Psicodelicias son propensas al moho (mis otras cinco plantas, cultivadas en identicas condiciones, no mostraron ningun sintoma). El rinde seguro va a ser muy bueno, ya les cuento cuando lo pese en seco. El olor de la Psicoldelcia en verde es muy caracteristico. No “huele rico” para nada, ni huele a nada conocido. Pero si es un olor muy propio que se recurda siempre. Yo la habia cultivado hace cuatro años y olia igual. Es una variedad super estabilizada, da plantas muy similares entre si, lo cual habla bien de Sweet Seeds. Saludos!

This is a cross between Critical (zamnesia seeds) and Girl scout coockies. i will veg and flower the best clone

Plants are growing! But so is my mold problem I recently got a hygrometer and noticed that my humidity was ranging from 64-70 percent which I realize is too high and maybe that is where my mold is coming From im starting to see it coming from the drain holes on the bottom of my pot. I’m going to get a dehumidifier and see how that works. Also I attempted lst to both plants . The doc og is a week older and definitely bigger than the apples and bananas but but are coming along nicely.

another resin monster from seedstockers, with a very special scent, full of flavors! grinded it smelled like peppermint, and vaped it has a great sweet creamy taste!

Can't wait to harvest! Probably going to wait another week. Trichomes are getting cloudier. A few amber ones, a few clear ones still. Most are cloudy. Gave them the last garlic spraying for the spider mites yesterday. Only spraying them with water now to keep the mites in check and wash off the garlic.😎

4000 ml jeden 2 tag pH-Wert: 6 EC-Wert: 1 Temperatur: 22ºC Luftfeuchtigkeit 62% Schädlingsbekämpfung: Mikroorganismen und Raubmilben PPFD: 200 µmol/m²/s DLI: Düngemittel: mineralischer Dünger NPK 10-4-7 Besonderheiten: wir versuchen bei diesem Grow Effektive Mikroorganismen aus. Die Opfer Linsen sind wieder da 😜 -Tag 93 Heute wieder mit Wasser und Mikroorganismen gegossen, jetzt sieht sie wieder gesund aus 😍 Wir haben sie auch wieder entlaubt um Schimmel zu vermeiden. -Tag 95 Heute erhielt sie 4 l Wasser, versetzt mit 2,5 ml Calmag und 6,5 ml NPK 10-4-7. Der EC-Wert lag bei 1,020 mS/cm und der pH-Wert bei 5,9 😇 -Tag 97 Heute haben wir sie mit 4000 ml Wasser gegossen, angereichert mit 3,5 ml Calmag, 7,5 ml NPK 10-4-7, 10 ml HY-PRO Rootstimulator sowie 0,64 ml HY-PRO Generator. Der EC-Wert betrug 960 mS/cm und der pH-Wert lag bei 5,9 😍

She was widely hidden from me behind the neighboring plant and I was surprised when I put the microscope to her and saw that it was ready after a mere 6 weeks of flower. I took a small middle flower to double check and all sides were cloudy with Amber trichomes. I’d really like to try this strain again and complete the tent with it. Because of its great density and trichomes she’ll be a great one to try out in the press. The rotate and text type box are still NOT working on iOS.

13. März Bin froh dich weiter gemacht zu haben. Blüten entwickeln sich prächtig und auch die AK gewinnt mittlerweile an Volumen. Sie wirkt dennoch dauergestresst. Die Lampe brennt mittlerweile schon seit letzter Woche die vollen 100% runter. Die Nanners an der Purple Punch wurden stellenweise von neuem Blütenmaterial überwachsen. Wasser gibts mittlerweile alle zwei bis drei Tage drei Liter pro Topf. Vor allem die Ak trinkt wahnsinnig schnell und viel. Gefühlt würde ich behaupten sie kann sich nicht entscheiden woran sie leiden will: Wassermangel oder Sauerstoffmangel. Beides schwierig. Sowohl trockener Topf straft sie mit hängenden Blättern, nach jedem Gießen allerdings auch. Ein bis zwei Tage nach dem Gießen richtet sie sich wieder auf.

A solid 13cm vertical growth this week but look at how much she has bushed out! I think she's going to make a very nice adult plant.

If anyone has any advice on how to improve this grow please comment below. thanks for checking out my diary! End of week 3/Day 27: ive been flushing alot before giving nutrients to the plant and it seems to be working, plant health is slowly improving again! Started LST a few nights ago and my plant has lost its christmas tree shape :'D the canopy is more flat and more light is getting to all growth on the plant so im happy! I started giving some rhizotonic near the stem to help with the plant being stressed. it definitely helped make big roots too! So excited to try some buds! another month or so yet :) Day 28 - 20/10/19 LST is amazing! i have almost all the growth getting a decent amount of light! im going to enjoy shaping the plant over the next week or so! Day 31 - 23/10/19 Still doing a light LST, most of the canopy is getting enough light now and the main stem is still growing more nodes. After getting some advice from a grower with the same model of light as me i now know i can hang my light a lot closer to the plants. im going to get rope rachets hooked up in the next week so i can adjust hang height. I also got an indoor chilli starter kit and planted jalapeño, cayenne and habanero seeds in some nice small terra cotta pots :) and i posted a few pictures to show the setup :) just cant wait until the whole tent looks more like a garden hahah :) 12 hours later - Added a video to show progress Day 32: 24/10/19 woke up this morning and the quick one grew upwards out of the LST :) the top has developed and looks more like an industrial weed plant now which is really exciting! ive been following a water schedule and accidentally gave a few more hours of rest to the plants last night and they have stopped drooping more or less. Re-lst'd the plant so all growth is receiving light and measured the space between the plant and grow light. its about 60cm/24Inches away which will do fine. Quick one is 18cm with LST, if i measure the stem itself its about 21-22cm tall - about 9 inches. Other than that the chillis will take up to 2 weeks to germinate, ive been keeping the moisture up around them with a mix of Rhizotonic/Water (1ml/1L) and also sprayed some on the soil as ive found it actually helps seeds germinate quicker with more strength or life in them. Will update soon for week 5 and considering the smoke is so bad in my town you get an urge not to smoke it i am so excited to be near the finish line :) roll on medicine!

This week has been a little better. Recovering from the ph and phosphorus deficiency issues. New growth has been a little better. Finally got rid of the crispy leaves from the deficiencies. I knew I was getting into a tough one with 200 ml of dirt. I just wanted to see what happened. I have learned a lot on this one. Buds are getting a little bigger each day. Merry Christmas and frosty buds to all.

Well the end has come to this beautiful strain What can I say it was fun to grow even considering the early problems I had with the yellowing it turned out amazing The smell and taste are out of this world. Tastes very citrucy and sweet. With a super heavy high. Looking forward to curing this one. Onto the next and big up the followers

Week 4 - This week, more plants are fertilized to 650 ppm.A survey found that one tree had abnormal leaves.

Vegetativa andata per le lunghe, finalmente é arrivato il nuovo box e ho passato in fioritura, i primi cloni sono stabili e stanno crescendo nei nuovi vasi. 14gg di fioritura

It's been 31 days of flower now and The gals are still loving the fc4800 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Lots of unexpected colors coming out now. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. Very good sign with the frost they are starting to get thanks to bith mars hydro lights. I can notice more frost under the fc4800 and I'm thinking it's from the UV DIODES they put on the fc4800 👍. 2 days ago they all smelt like my nuken, sweet marshmallows. But now I can smell the monkey dough and gorilla glue and skunk monkey coming through👍. I touched a bud on the gorilla and monkey fingers smelt like fruit loops👍 really pleasant smell. Lingered on my fingers for atleast 30 min. I'm glad mars hydro is under priced compared to some brands and for how popular they are. usually companies would charge more. Thanks mars you guys are awesome 🤘🥁🎸. I'm getting a new exhaust fan soon. An 8 inch that will work alot better than my 4 inch lol. Wayyy to small for a 8x8 Grow Tent. Dehumidifier is going almost non stop to try and get the humidity down. I love how both lights on 100% power only raise my temperature 2 or 3 degrees 👍. You can rest your hand on the lights and not much heat comes off them. Obviously there is some heat but for the brightness of the lights and only raising the temp that much is awesome 👌.  And if I wanted to I could remove the driver from the fc4800 and run it on the outside of my tent because the cord is so long but 2 or 3 degrees is barely nothing👍. The girls are starting to bulk up abit now and only 3 weeks of flowering, these lights are awesome 👌.  My last run of monkey dough and gorilla glue didn't start showing alot of crystals until week 4. These were only 2.5 weeks and I started noticing some frost. Next week I will be able to tell more about what these custom bred seeds will be like. I love how the smell is changing now. Didn't want all them to smell like nuken marshmallows lol. It's awesome that I can get right inside the tent to do any work i need👍. Even if I wanted an 4x8 tent. I'd rather this 8x8 because it's so easy to work with the plants and have so much room to move around and massive headroom when I'm in there chillin with the gals🤣🤘. FOR EVERYTHING MARS HYDRO VISIT: Www.mars-hydro.com PROMO CODE: rocknroll Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍  

7.9.24 I had to some major jungle patrol! Everything is going crazy! I was adjusting the plants around to maximise light exposure. One branch bent. FBP1, the branches are getting heavier. I had to add my last 2 stakes. I used duct tape and some imagination, tying with string, for the rest of it, too. I'm not going to be able to move them again, so tick, toc ladies! I added 3ltrs of dechlorinated water PH'd to 6.2, containing the following nutrients:- ♡1ml per litre of Ecothrive Flourish ♡2ml per litre of Xpert Nutrients Bloom Booster. ♡2ml per litre of cal-mag. After watering each pot with 3 litres in each, with the above nutrients. FBP3. She has again spilled out, run off. I might have mixed my soil, and used less perlight or coco. I've overwatered that plant twice now, fairly recently I'll only give her 2 litres in future. Continuing to give the others 3 litres. I've continued to defoliate. The leaf in the photo was the only one and it was like halfway up the plant. Not sure what it was, so if you know, tell me in a comment please! 8.9.24 Have not needed to adjust any ties. I watered each plant with 1ltr of dechlorinated water, PH'd to 6.2. With the following nutrients. ♡1ml of Ecothrive Flourish ♡2ml of Xpert Nutrients Bloom Booster ♡2ml of cal-mag I don't want to overwater, I also need to not let the soil dry enough to kill the microbes. I'll keep an eye on it, and adjust it as necessary. 8.9.24 I had to adjust ties and support for several branches. The fruits are getting heavier. I really hope they get done before anything breaks under the weight. I keep checking the trichomes daily through the jewellers loupe, each plant, and different bud sites. 9.9.24 Dijons birthday 💔 Ok, today another branch on FBP1, Branch wasn't snapped open, just fell under the weight. I tied it back up. I have some potash, which arrived today. I was going to top dress, however I've decided to cut all nutes now. I'm just watering with dechlorinated water PH'd to 5.8-6.0. "Final flush". I will continue this for next watering or so, then switch to straight RO water. Also I'm slowly lowering the temperature of the water, to about 70°F. When I see any amber, I will throw into the dark period for 48h. 10.9.24 After having my last question answered, I have decided to go ahead and call it a day on this grow. The plants had a final watering last night, with regular dechlorinated tap water PH'd to 6.0. This evening I have put all equipment inside the tent, like the dehumidifier, tower fan. I have split the stems, I mean why not? 😅 I will leave in the dark period for 48h then chop the whole grow, to dry together in the tent. FBP2 I am satisfied with the readiness. FBP1 and FBP3, are mostly glassy still but they need to come down too. I need to get it done and dried, if it's not the best smoke, it's my fault for being incompetent due to inexperience. I just don't want to risk messing up my FBP2, due to waiting on the others. So it is what it is I guess. We'll have to wait and see. This was quite possibly the worst time imaginable to do this run. I've had so much personal tragedy and upheaval, (of course we never know when these things will strike); combined with the unexpected conditions, including temperature and humidity throughout the grow. This being my FIRST grow of any plant at all, and these being autoflowers was particularly stressful. Fingers crossed that it works out in the end. All I'm concerned about now is drying in the closed conditions of the tent environment, and avoiding mould issues. The finish line is in sight. I'm so glad, now I can get back to my life. Will update, when I harvest! 🙂

Everything looks fine. Stopped feeding them for 2-3 days because of the yellowlish leaf tips. I am thinking to make a defoliation since a week but i am not sure how i should do it. Would appreciate some advice ^^

SATIVA DREAM by KANNABIA Week #15 Overall Week #14 Veg This her last week of veg she's about to start to flower next week and she's looking good so far!! Stay Growing!! Kannabia.com. SATIVA DREAM

Hard not to play with them but i did anyway. These girls look ready being all golden. Close inspection of tri shows a couple of golden tips (not many). Top of heads look good but down low are still white hairs and no cloudy tri. I will wait another week. Having pulled a small cola I plan to try in a week after drying to see how it tastes.

week intel: we reached the peak of flowering stage and need to cause a little more e.c stress from this week so e.c stress is twice a week i reduced the amount of Nitrogen and calcium and stopped feeding silicate in other hand i raised the amount of base nutrient and booster short story version: more K & P - less N stresses : a little E.C stress around 1.6 and 1.7 twice a week from this week feeding: i feed them 3 times this week with this order : day 1 : i feed them high with base nutrients(calcium & micros (half dose) + Bloom) about 822 ppm - 1.6 e.c to cause a little stress. day 3 : i feed them low dose of Top-Max + B-52 around 525 ppm - 1 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them high dose of Feeding Booster around 850 ppm - 1.7 e.c to cause e.c stress again guide of the week : from this week we can cause more E.C stresses. e.c stress if done correctly is one of the very few ways to increase quality in all aspects ( color , aroma , taste , bud structure , resin contents ) but if you over do it , listen carefully brother : it can reduce quality in every aspect so always look for signs and never reach the red line.