Likes
22
Share
Flowering day 74 since time switch to 12/12 h. Hey guys :-) Finally the time has come . The lady was harvested and hung upside down in the dry tent 😍. Before that, she stood in the drying tent in complete darkness for 2 days and the large leaves were removed. The small leaves stay attached during the drying process so that they protect the buds and allow them to dry more slowly and evenly :-) . In the dry tent, the temperature is 18-19.5 degrees and the humidity is 54-58% 👍. In this environment they are now allowed to hang for 10-14 days before they are fine-tuned and trimmed clean by hand. then after trimming they come to ferment for 6-12 weeks in dark jars with bobeda packs 62% to keep the perfect humidity. After a few weeks, the Boveda packs 58% are used so that they can slowly dry out :-) . Of course there is one last update after trimming. Until then, I wish you a lot of fun with the update. Stay healthy and let it grow 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 A thank you for this wonderful strain goes out to Herzog https://instagram.com/herzog030?utm_medium=copy_link and the Exotic Seeds team You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. You can buy this Strain at : https://www.exoticseed.eu/ Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼👆🏼 MadeInGermany
Likes
13
Share
@Haoss
Follow
The plant has entered an active flowering phase, has undergone defoliation, feels good
Processing
Likes
5
Share
@Blakoby
Follow
Started to fed her this watering. 1/2 tsp per gallon Floricro 1/2 tsp FloraGrow 1/4 tsp FloraBloom 1/2 tsp CalMag+ 2ml hydroguard She jumped up 3” in 1.5 days after feeding. She was wanting it bad lol
Likes
92
Share
@MrCOCO
Follow
The photos speak for themselves, I can only add that it was a pleasure ...
Likes
17
Share
The blue gelato 41is not doing so well, but I just made some recent changes. Light has been switched to 20/4 from 12/12 from previous week's due to my last plant finishing up from first grow, from random bag seeds. This week I cleaned my tent lowered the light on the 24th of the month to 21 inches. Purple punch and the gorilla zkittles coming along strong and healthy, however the gelato is still showing some symptoms, maybe over watering perhaps wasn't getting enough light, not sure but I will be transplanting soon so I hope she does better in a bigger pot. I already have the coco ready mixed with worm casting and couple of Gia Green's products, all purpose, Glacial rock dust and oyster shell flour.
Likes
12
Share
Wächst bisher alles Gut. Die Erde ist Dope Soil von Florganics Tag 26 : 600 ml gegossen, Die Erde vorsorglich mit SF Nematoden beimpft.
Likes
6
Share
The one in the middle still did not recover. The one in the right top corner is still happy and enjoying life. Today, a trailers net has been added to level canopies.
Likes
25
Share
Bueno familia ya finalizamos con el proyecto de las Runtz de seedstockers, son una cepa bestial. La verdad que el secado muy bien 9 días en Malla y a los botes, 40% humedad y 21 grados es la temperatura ambiental que han tenido en el secado, aparte deshumidificador enchufado 24 horas al día. En resumen la cepa es muy fácil de cultivar, el germinado se me resistió igual es complicado el germinado pero el resto es simple resistente fácil de alimentar pienso que es rápida los tricomas ya estaban hechos y se me hecho el tiempo encima. Por lo demás de miedo os la recomiendo. Gracias a Seedstockers, Agrobeta y Mars hydro, sin ellos este proyecto no sería igual 🙏. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Buenos humos 💨💨💨
Likes
18
Share
Chopped her wet trimmed her now waiting till it dries lil nugs that I cut off to dry faster to get a taste and effect test she smokes beautifully ands she tastes like mango
Likes
4
Share
The smell.... amazing... Looks like I have ended up with 3 purple phenos and 2 green phenos out of these 5! These are stacking up nicely, however, they seem like they will end up being smaller plants than im used to. Just kind of staying low and slow. They have a long ways to go, so ya never know! They may gain some size, but they better do it soon! These ladies hit the HPS light this week, at 750 watts. So we will see! Some BEAUTIFUL purple flower!
Likes
14
Share
@MG2009
Follow
03/13/2022 Love the colors on Grape Skunk #1 others are not as purple, again i forgot Biscotti Skunk and lemon og. 03/14/2022 Uploading Biscotti Skunk pic's I'm really loving 3 particular girls this run,all plants are exposed to PW intentionally I need girls that can take PW with no issues and three plants are spotless. The first is the only Biscotti Skunk that was female of 5 cloning for outside run but will do great in basement without PW issues. The second is lemon og spotless, and the third is the grape skunk thats got most color the second tallest of the grape skunks, cloning for testing in New England zone 7 should get at least one if not all 3 to finish before cold sets in.
Likes
6
Share
Week 2 of flower 👍🏾
Likes
8
Share
@Lykal
Follow
Germinação, após germinar foi colocado num vaso 11l com solo All-Mix Biobizz
Likes
51
Share
@urbi09
Follow
Diary Plant was given nutrient solution every day when the sun went down in the concentration down bellow -    FloraSeries Gro-->1.8 mL/L -    FloraSeries Micro-->1.2 mL/L -    Flore Series Bloom-->0.6 mL/L -    Calcium solution-->1 mL/L I started with 1L of tap water measured at 240ppm. Then added Calcium fertilizer from gardening store and ppm were around 500. Then Flora series nutrients were mixed in and ppm reading was around 1000. This is to high so I diluted the solution with tap water to 650ppm. I ended up with 2 L of nutrient solution. Day 67 I topped again for the fourth time and did some prunning, plant now has 16 mains. I also did some bending. Firstly I had to build some kind of support where mains would be attached to. I shaped 1 m long steel wire into circle shape, drilled a hole into plastic pot and pushed the 50 cm long wooden stick through it. Then steel wire was zip tied on to wooden stick. Bending was quite easy to do. I used soft rubber wire to attach mains to the steel wire support. I bended in the way that mains were equaly distanced from eachother. Weather report Day 64-67 Weather was sunny, not a single cloud in the sky. Day temperatures were extreme, around 37 °C. Night temperatures were 29 °C Day 68-70 Weather was sunny but the temperatures calmed down a little bit. During the day I measured around 31 °C.
Likes
9
Share
@Skybase
Follow
Almost killed them, ton much water en not enough light.
Likes
144
Share
@roro_204
Follow
Week 2 of flower for these girls. I decided to use a lesser dose of nutes because I noticed after a few days after my feed last week that there may have been some leaf burn. -I changed up the nutrients a little and also finished putting up my inline fan - pulling fresh air from outside in for CO2. I simply used ducts for it. Now that cooler air is coming in from outside I can slowly turn up my lights to 900 watts, I’ll see how they do in about a day or 2 more and then the lights will switch to 1000watts. -Did some more defoliation. The leaves grow so fast!! Took 2 days to do all my plants lol I’m trying to do it every week or other week -The plants are drinking a lot more than they used to, I’m now feeding water every second day and nutes every second day! They’re growing so fast before my eyes It’s such a cool feeling seeing all my hard work coming along, with the first buds popping up and looking like real weed now. Feeling motivated! 😇