The Grow Awards 2026 🏆
Likes
Comments
Share
@Natrona
Follow
Auto Purple Hulk Auto by MSNL Outside 👉Sponsored Grow👈 W11F7 8/24-30 After the hurricane, I decided to finish growing Auto Purple Hulk inside the tent. I watered twice this week, once at the beginning and today at the end. CalMag 10ml/g Green Sensation 4ml/g Recharge 2,5ml/g PPM 826, PH 6.2 temp 69.8. I brought Purple Hulk on August 19, 2 days before the hurricane. Let me warn you right here. First, do not be so anxious to grow outside. Before moving four outdoor plants into a tent, they were inspected for pests and mold, but none were observed initially. After relocation, the heat and lights in the tent created conditions for caterpillar eggs to hatch. Caterpillars began to appear gradually over several days, with 20 to 30 found during one inspection. Caterpillar coloring matches the parts of the plant they consume, making detection difficult. As a result, Purple Hulk will be harvested due to significant pest activity; trichomes are mostly milky with few amber tops. Second, it is also advised not to bring plants indoors without proper quarantine procedures, as caterpillars can migrate to neighboring plants via webs. This was observed with Tropicanna Poison XL, which was next to Purple Hulk in the tent. Finally, for plants grown outdoors at any stage, bud washing at harvest is suggested, as demonstrated in Jorge Cervantes's video: https://www.youtube.com/watch?v=kkEYz8-YeUA. The proximity of Purple Hulk to other garden vegetables such as broccoli, cauliflower, and cabbage—primary targets for white cabbage moths—may have influenced the number of eggs found. Previous outdoor growing seasons did not experience similar caterpillar issues, though bud rot has been common due to humid summers in Virginia. Auto Purple Hulk buds developed beautiful purple hues from mauve to purple. They are big, dense ands sticky. Thank you all for your continued support and encouragement. Your likes and comments motivate me to keep sharing my journey. Let’s continue to learn to grow together! Stay green, growers love 💚🌿, 💫Natrona💫
Likes
7
Share
New leaves still discolored but growing apparently correctly. Possible reasons: - genetics (?) - heavy fertilized soil - Batmix from Plagron was used (?)
Likes
9
Share
Very sweet smell, super flowery, I cannot wait to smoke her buds, hope I get a very energetic high from this girl, but I'm loving her terp production so far! 👨‍🌾💚🧡
Likes
16
Share
@DabBod
Follow
This week went well and I seen quite but of growth. I top dressed today at 1 tbsp per gallon 50/50 444 all purpose and 284 bloom. My first pheno is getting quite large and I’m slightly concerned about over growing the tent when flipping to flower since the tent is only 6 feet tall and the plants nearing 3 feet tall including the pot, but I don’t want to short myself with the second pheno slowly starting to catch up. I plan on trying to continue to scrog the larger plant until next Sunday then flip to flower.
Likes
15
Share
Day 11 i feel like the girls are getting stronger so I top dressed with 4-4-4 Gaia Green and watered with recharged tea ph to 6.5.
Likes
31
Share
Hey all! 🙌 It's me again, after a hiatus I'm back in action and this time I'll be growing two plants! The strain is Green Gelato from Royal Queen Seeds and the two babies are going to be Pistachio and Matcha, two green ice creams flavors to match with the strain name! 😋 I started soaking both seeds in a glass with water for 24 hours to hydrate them (I forgot to take a photo of this!) and after that I placed them in a jiffy pellet. After some days Pistachio was the first one to show while Matcha was still being a little behind. During this I made a small mistake, instead of opening the cardboard box where I placed the seeds I left the baby plant inside so she grew a bit too much during the night... ooops! But nothing too serious (I got it fixed after moving her into a cup). Some days after Matcha appeared but it seemed she was having a small issue, it seemed like part of her shell was still stuck to her so I helped by removing it and then she started to grow normally once again. Right now I moved Pistachio to one of those red cups and I used some mycorrhizas on her! Glomus mosseae and glomus intraradices to be more precise! Next week I'll be doing the same with Matcha. 😊 I also started making a timelapse (I think it looks awful haha but it helps to see how Matcha started to recover!) I hope you'll all enjoy the photos! 😃 See you all next week!
Processing
Likes
10
Share
Tutto sempre preciso per ora, molto soddisfacente. Defogliato e eliminati i rami in eccesso Verso metà settimana hanno cambiato marcia, crescono a vista d'occhio +- 10ml/l fosforo Ho aggiunto una lampada led da 1000watt per coprire più superfice E le mele per aumentare la produzione di resina in risposta all'etilene rilasciato dalle mele
Processing
Likes
10
Share
Start of week 3 and they are fine built a SCROG that I will drop after I mainline them 10/29/20 So the Mango Kush and the Grape ape were topped at 3rd node after the 5th grew out I kept the tops and cleaned them up and cloned them will be making a diary reversing them once I know Forsure they took root. Been having bad weather lately because of the hurricanes so the temps in the tent in the shed are in the 60’s tomorrow I will be insulating the tent to aid with that problem 10/30/20 The 2 that were topped yesterday are recovering and today I topped the Gelato 41 after they all shake back I will tie them down and start the mainline process
Likes
11
Share
Likes
9
Share
@AustinRon
Follow
2 Week AC3Q - Seedling Ambassador Cartwright by IRIE Genetics (Clementine X Arise) X Arise ((Tangie X Lemon Skunk) X Arise) X Arise  Start of Week 2 - 16 July 2022 AC3Q 15:S:2:1 to 22 July 2022 AC3Q 22:S:2:7 Environment: EC Targets: # rel. | abs (rel + source) ECseedling: [0.4, 0.5] [ 0.7, 1.0] ECearlyveg: [ 1.1, 1.4] [ 1.4, 1.7] EClateveg: [ 1.2. 1.5] [ 1.5, 1.8] ECearlybloom: [ 1.1. 1.4] [ 1.4, 1.7] EClatebloom: [ 1.3, 1.6] [ 1.6, 1.9] ECripen: [ 0.9, 1.2] [ 1.2, 1.5] ECflush: [ 0.0, 0.0] - Seedling (Week 1-2) - Temp: 78-82°F - VPD: 0.85 ± 0.05 - Photoperiod: 18/6 - Light Strength Start: 200-300 PPFD - EC: 1.0 FertigationFoliarMonday: Solar Wind: [ 2.5, ml, 500, ml] Silica Skin: [ 1.25, ml, 500, ml] FertigationFoliarWednesday: CalMag Fuel: [ 2.5, ml, 500, ml] Lush Green: [ 1.25, ml, 500, ml] FertigationFoliarFriday: Solar Wind: [ 2.5, ml, 500, ml] Peak Bloom: [ 0.675, ml, 500, ml] # Cease Begininning Flower Week 5 Rooted Leaf: Primary: # Mix and store for week, not Primer A: [ 2, ml ] Primer B: [ 2, ml ] Silica Skin: [ 1, ml ] # Mix with Base AT Feeding AtFeeding: Root Anchor: [ 1, ml ] # Sprout Lush Green: [ 1, ml ] # at Seedling (3 Nodes) Cal Mag Fuel: [ 1, ml] Sat 16 July 2022 AC3Q 15:S:2:1 - Remaining Plants , 1,3 - 7 (6 Total)    #7 (The Last One) was a potential Lost-Cause - HOWEVER - Her damaged leaflets were praying this morning. It provided sufficient material for Sex Testing.; Sex Testing - [x] Form Filled Out - [x] Clip #3 - [x] Clip #4 - [x] Clip #5 - [x] Clip #6 - [x] Clip #1 - [x] Clip #7 - [x] Package assembled & Mailed (1400) - [x] Install Oscillating Fans (2) - I should have done this LAST WEEK - Wondering why we were growing floppy plants - NEED Light Mechainical (AirFlow) Stimulation to build STRONG MERISTEMS. #6 After Clip  - Mixed up Sat Night/Sunday’s nutes - Full Panel ~ EC: 1.0 Sun 17 July 2022 AC3Q 16:S:2:2 0800: 30 ml full 0.8 EC - Wow - Every time I open the tent after extended close - I’m arrested by the Size change in the leaves. Right now - I see hybrid Vigor! - Installed supports for two leaners, should be ready to come off Wed/Thus ec 0.3 0.4 ml a 0.4 EC + 0.1 0.4 ml b 0.7 EC + -.3 0.2 si 0.7 EC + 0.0 0.2 cm 0.8 EC + 0.1 0.2 lg 0.8 EC + 0.0 2130: 20 Ml Full 0.8 EC - [x] Add Fans to Cabinet for plant strength - [x] Removed supports from 1 & 4 (Flopping Meristem) - Took 6 hours w/ fan for them to stand up! Mon 18 July 2022 AC3Q 17:S:2:3 0900 - 30 Ml Full 0.8 EC 2030: Mixed up Fresh Full @ 1.05 ± 0.05 EC 2100: 30 ml Full Fertigation Tue 19 July 2022 AC3Q 18:S:2:4  0800:30 ml Full EC: 0.8 
 - [ ] Mix up 1.05 ± 0.05 EC FULL 2100 Mixed up Full - EC: 1.05 ± 0.05 Raised ppfd Wed 20 July 2022 AC3Q 19:S:2:5 o730 ec 1.0-1.1, 30 ml per adjusted fans Foliar: - lush green - calmat Thu 21 July 2022 AC3Q 20:S:2:6 - Though fixing’ to harvest - she could use a little water (500 ml) w a littl Rooted Leaf Resin Bloom Fri 22 July 2022 AC3Q 21:S:2:7 Foliar: Solar Rain
Processing
Likes
Comments
Share
@Fergie
Follow
Hey guys so here is number 2 still on fire and just taking on amazing form .she has a really nice smell coming off her hard to point out yet as early . Till next week
Likes
58
Share
@Kynareth
Follow
6 days and plant looks healthy and with vissible root throught jiffy so transplanted to final bucket with expanded clay. 5.8 ph and 1,2 ec Day 6 and plant still look really small so i have removed some expanded clay and moved the jiffy more to the bottom. I saw some roots outside the jiffy so good news i guess but not happy at all
Likes
5
Share
Last feeding before the flush, colors starting to show already.
Likes
11
Share
Another strong week, opted to do some last minute defoliation just to help afew bud sites get light. Shes frosting beautifully ;)
Likes
5
Share
🗓️ Week 10 complete – 6th week of flowering Seriotica Drain EC was a bit too high at the beginning of the week, but has now stabilized around ~1.5. She’s handling 1.0–1.2 EC input very well, showing no new signs of stress or deficiencies 🌿 Thanks to consistent monitoring and careful adjustments, flowering continues steadily – no surprises, no setbacks. Next week, the switch from Big Bud to Overdrive is coming up 🌸
Likes
4
Share
Wound doing minimal defoliation and pruning as you can see. Will prob prune the bottom leaves tomorrow and that will be it as far as Any pruning and defoliation goes. It is next to my wood stove rn which is not running however 90% of the time it will be this winter and stays around 70 degrees F and 40% humidity without the dehumidifier running. When the woodstove is not running it stays at 66 degrees and 50% humidity with dehumidifier running. For the last 3-4 days b4 harvest I will not run the wood stove and keep the dehumidifier on to get the colors out in this plant.
Likes
5
Share
Week 3 for the strawberry gorilla 🦍 from our favorite autoflower company, of course fastbuds 420! All looks quite good at the moment. This week we gave bloom, root, silica, calmag amino, sugar shot, sticky fingers and bloom booster all from xpert nutrients!
Likes
2
Share
Been a rough week with temperature and humidity as well as starting the flush probably half a week early. Hopefully back to smooth sailing for the final couple of weeks. Just as long as it doesn't get much hotter outside .
Likes
9
Share
@Mr_Height
Follow
Producing steadily, slight smell. This pheno is strong and fast growing. Not as susceptible to light burn as the sister pheno. Also more productive, and managed to top itself as a seedling without any help. Will keep this strain forever. I absolutely love it! Happy growing 💚🌱