Beautiful buds. Smell is great. Nice fat bads

Día 54 (10/03) Riego 1,25 Litro H20 + Wholly Base 2,5 ml/l + Solid Green 2 ml/l + Early Flower 1,25 ml/l de Gen1:11 TDS 1033 PPMs - pH 6,51 Día 55 (11/03) Defoliation time! Con la increíble ayuda de @miyaguiokpolilla, @dogdoctorofficial y @growwithflow420 hice la defoliación recomendada exactamente después de 21 días cambiada a 12/12 Consejos de defoliación - Elimine menos del 20% de las hojas de abanico y solo las hojas de abanico - Retirar el tercio inferior de la planta, incluidas las ramitas. - Retirar las hojas en forma de abanico dirigidas hacia el interior de la planta. - Retire las hojas de abanico que dan sombra a los futuros cogollos. Día 56 (12/03) Esperando algo de estrés tras la defoliación... Han crecido 2 centímetros en 24 horas 😍🚀 Día 57 (13/03) Riego 1,25 Litro H20 + Wholly Base 2,5 ml/l + Solid Green 2 ml/l + Early Flower 1,25 ml/l de Gen1:11 TDS 1043 PPMs - pH 7,0 Las plantas muestras una ligera deficiencia de CalMag. Voy a subir el pH a 7.0 en este riego para mejorar la biodisponibilidad Día 58 (14/03) Siguen con su crecimientos, los cogollos formándose y las hojas de azúcar empezando a llenarse de resina Parece que la corrección de la deficiencia de CalMag ha sido muy efectiva! No hay más manchas y las plantas no paran! Día 59 (15/03) Como mañana me voy a Spannabis 😍 voy a adelantar 1 día el riego reduciéndolo a 1 litro Riego 1 Litro H20 + Wholly Base 2,5 ml/l + Solid Green 2 ml/l + Early Flower 1,25 ml/l de Gen1:11 TDS 1080 PPMs - pH 6,57 Día 60 (16/03) Spannabis time! 🚀 Día 61 (17/03) Spannabis time! 🚀 💦Nutrients by Gen1:11 - www.genoneeleven.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae 🎚️Controlled by TrolMaster TCS-1 Tent-X System Main Controller - https://www.trolmaster.com/Products/Details/TCS-1

Hello The pistils are turning Amber, the leaves are getting more and more purple and the buds are getting bigger by the day. Im starting to flush her now and I believe I could harvest her around 23 october, in 10 days. The smell is already delicious and powerful.

Super sour grape(small it was stunned early ) Bruce strawberry Fumes Watermelon Zkittles Fumes

This week we did some more garden maintenance with some light pruning. Added some "Grower's Edge" to the help keep flying pest under control, and we did a quick demonstration on super cropping. Only issue we ran into last week was forgetting to water the plants for a few days so they looked droopy, but with a few gallons of water everything was back on track in a few minutes.

Heavy defoliation, and feeding water only from now on

Today marks the start of Week 6, Day 2 for the grow, and I’ve got a few updates. The PPMS aren’t quite where I want them after the last couple of feeds, so I’ll be continuing with higher feeds to bring those levels back up. It’s a bit of a balancing act, but I’m staying on top of it. I also made the decision to flip the light schedule from 16/8 to 12/12 today to initiate the flowering phase. I’m excited to see the plants start stretching and showing their full potential. It’s a big step, and I’m feeling good about the direction things are heading. Happy growing! 🌱💡🌿

She starts growth good

23.2.25: I watered with approximately 1.5 ltrs per plant. I mix 6.5ltrs of dechlorinated water PH'd to 6.4. This time, I only added Ecothrive Biosys to the water because I have just top dressed the soil. Adding anything extra right now would probably be overkill and result in toxicity from too many available nutrients. I defoliated minimally mostly Do-sì-dos, Watermelon, and Pink Mist. Due to the scrog net, it's about all I can reach 😅 I've moved the plants to increase space for Gorilla Cookies 🍪 and Bubble

Day 50. Had big plans, but postponed them to monday/tuesday. Will strip and heavy bend/lst girls, give them 5 days and i think they will be ready for flower. Increased light power output from 50% to 70%. Girls got water with 0.5 ml/l Fish Mix. Overtimes and all weekend at work stops me a bit, but work is work ... Day 54. Girls got heavy training, started it even too late, leaves were too droopy. All went good, while last one was done, first were somewhere "happy" ;))) Pure water. Think to send them to flower this weekend. Day 55. And like nothing happend ;))) All girls are happy and bushy, one or two days, darkness and FLOWER TIME ! ;) Happy Growing !

Disculpen las fotos, es que las saque para consultar. Bueno primero que nada fue una semana de mucha tormanta, lluvias y humedad. lo peor que nos puede pasar en floracion. Segundo intente hacer supercroping ya que las ramas seguian superando el tejido y les llegaba luz en la noche. Y me salio desastrozo, mi primera vez. Pero los otros punteros que superaban la altura, los hizo mi compañero que sabia hacerlo (No tengo foto, luego actualizo). Y Tercero que debido a la humedad se ven en las fotos como aparecio hongos, por lo que pude observar era solo ese poco, lo cual ya fue removido vamos a ver como continuamos.

06.12. Tag 72 Blüte 46. Hi. Niemals aufgeben, dann gibt es sowas. Erstaunlich. 16 h Licht ab jetzt. 09.12. Na gut, ich gebs zu. Ab jetzt macht es Spaß. Denn da hängt doch mehr drann, und in besserer Qualität als ich dachte. Lehrreich war der für mich bisher auf jeden Fall. Ich habe viel zu scharf gedüngt zu anfang. Stellt euch vor, diese weißen Blätter leben noch. Klar wo braun ist nicht. Aber sonst. 11.12. Seht ihre wunderschönen grünen Blätter, eine Pflanze die euch das Wasser im Munde zerfließen lässt. ( Argh ein winziges grünes Blatt. Eines! Ihr dürft gerne selber suchen.) ... ( allerdings, die Riecht guhhht, das ist richtig) Und stark, also stärker als diese Sorte sonst riecht. Ich kenne sie.

💩Holy Crap We Are Back At It And Loving It💩 Growmies we are at DAY 56 and she's just killing💀it👌 The Gorilla Punch Is Amazing 👏 But so is the OG 👉We are in full flowering mode for the👈 OG 👍 GP 👍 the AF was the hold out but shes finally went into flowering👈 So Shit , I gave them just a tad to much nutes at the start feeding 👈 But I have since fixed it So I'm still doing some low stress training 🙃 and some defolation 😳 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

Switched to flowering. She grew 10cm in 3 days... absolutely crazy. I took the tough decision to discontinue the TimeLapse. My tent is not big enough to have the camera in a place that kinda makes sense. So I'll be taking manual photos in the coming days and uploading those.

Ordered a scale the other day so should have some more numbers tomorrow! Not going to sample anything until I get the scale, then I'll update with some more details.

Hello Diary, What a trip. I read a lot about the new F1 hybrid strains when they came out and was really interested to see how quickly they would develop. And indeed, in the end I can say that I am very satisfied with the Medusa F1. I planted three seeds but one did not sprout so two remained on the farm. The first Medusa was ready to harvest 68 days after the seed was placed in the ground, the second Medusa stayed a week longer. All the time the vegetation and flowering grew happily and contentedly. I didn't feed them too many additional supplements and they grew as if they were on steroids. After harvesting the first plant, I put it in a cardboard box to dry to protect it from light since the second plant was still on the farm. Drying lasted 14 days, after which I trimmed the flowers and put them in jars. The final result is 116 grams of dried flowers. Medusa F1 #1 - 47 g. Medusa F1 #2 - 69 g. In the end, I can only honestly recommend everyone to try growing this great strain. Thank you all for your support and see you soon with new F1 strains.

Think these ladys are gonna be big 🤔

I have been busy with a new job so I have not been able to spend much time with them I went yesterday after several days of rain and they had grown about two feet. ncredible

IF YOU WATCH THE VIDEO YOU CAN SEE THAT I MOVED THE LAST AUTOFLOWERS INTO THIS 5X5 TENT, AND MOVED THE PHOTOPERIODS INTO THE 8X8 TENT. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.