Set up an evaporative cooler to act as an intake and to cool the temp through evaporation. It I was able to get the average temperature down to an average of 77°. Relative Humidity increased to an average of 55%. ~~~~~~~~~~~~~~~~~~~~~~ Evaporative Cooler: The evaporative cooler was way bigger than I thought and blowing all the air into the tent would be overkill and would throw off my ventilation given that I only have a 4inch exhaust fan blowing air out. So I had to rig an air duct onto the front to channel some, but not all, of the air coming from the evaporative cooler. I cut a hole in a plastic brownie box and zip tied right angle plate that I had leftover from an ikea furniture. Then I put velcro tape to easily attach and remove the air duct from the cooler for future maintentance and cleaning. I left the room where my tent is closed one day and the humidity went up to 84% which also increased the temperature to 90° but I found that simply leaving the room door open gives the cooler enough air circulation in order to function properly and averaged out at 55% RH and 77° F. ~~~~~~~~~~~~~~~~~~~~~~ Defoliated some ugly fan leaves that were shading a lot of lower buds.

***Sponsored Grow*** = Medic || https://medicgrow.com || Grow = ***Sponsored Grow*** Ok big update this week, I finally edited the footage of the lights and got their unboxing photos processed, this took way longer then expected and should have been done on germination or week 1 entry but better late then never. You can really see how the lights shine in comparison to my older ones. The brightness of the leds is next level and I can use their V1 spectrum from seed to harvest. Its a great balance of red and blue in a full spectrum light. The medic grow mini sun 2 is a all purpose light that I can see myself getting lots of use out of in the future. Plus they fit in my tent just as snug as my last ones and that's a big thing for me, I don't like dim corners. I am using the lights at 80% dim level. this will be raised to 100% when they enter flower :D First time useing lights I can dim. they also have an onboard timer attached to them, I will be playing aorund with this to see if its something I want to use in the coming weeks, I all ready have all the external timers so I can see how this is a useful tool for anyone starting off without them. On top of all this I also transplanted my plants into their final pots. they went from a .7-.8L to a 2gal or 7.5L, all the root balls on the plants where perfect, nice white roots, maybe a bit compacted for the size and might explain why I am having some issues with them but healthy none the less. I think they will not start to grow a bit better and I will see less issues moving forward. I still have yet to get a new PH pen but I am blindly guessing the PH by adding 2 drops of phosphoric acid ph down per 1gal of feed solution. it seems to be working out just fine. Till next week. ***Sponsored Grow*** Official Website: https://medicgrow.com/ Facebook: https://www.facebook.com/medicgrowled Twitter: https://twitter.com/medicgrow Instagram: https://www.instagram.com/medicgrow420/ YouTube: https://www.youtube.com/channel/UCNmiY4F9z94u-8eGj7R1CSQ Growdiaries: https://growdiaries.com/grower/medicgrowled https://growdiaries.com/grow-lights/medic-grow

FERMAKOR BARREL MIX – BASE IN USE (Testing on the Fantasy Feast girl we pulled out of another diary https://growdiaries.com/diaries/274722-grow-journal-by-yan402 ) (FERMAKOR BASE SYSTEM KOH VERSION diary https://growdiaries.com/diaries/278391-grow-journal-by-yan402) (Urea & Micros on the way — first week running without them) 🍶💧🍶💧🍶💧🍶💧🍶 💧 30 L Barrel – Current Working Mix 🍶💧🍶💧🍶💧🍶💧🍶 Step 1 – Calcium Nitrate (Part A) 7 L warm water (~35–40 °C) → added 45 g Calcinit, stirred until fully clear. That’s the calcium + nitrogen backbone for the feed. Step 2 – FERMAKOR PK Base (Part B) 15 L water in the main barrel → added 30 ml FERMAKOR PK Concentrate, mixed well. This forms the main P + K part of the formula. Step 3 – Combine Solutions Slowly poured the Calcinit mix into the barrel while stirring — no reaction, still crystal clear. That confirms the mix is stable and precipitation-free. 🌿 Step 4 – FPJ / FFJ Batch Added 30 ml homemade FPJ (fish + veg batch) ≈ 1 ml/L. Color shifted to a light-amber tone — looks alive and active. 🍋 Step 5 – Citric Acid Balance Added 1 tsp citric acid after everything was blended to fine-tune pH and help chelate micros later on. 📦 Step 6 – Top Up & Check Filled to the 30 L mark with plain water → pH tested with drops, showing yellow-green — roughly 5.8 – 6.0 range. Nice clean look, stable smell, no residue. 💧 Current Base Ingredients (Active Mix) Warm Water ≈ 22 L total Calcinit 45 g → N + Ca foundation FERMAKOR PK Base 30 ml → P + K support Citric Acid 1 tsp → Chelation + pH balance FPJ / Fish Emulsion 30 ml → Organic enzyme booster Result: clean amber mix, mild and balanced. I’ll let this version run for a week before adding anything. 👀👀👀👀👀👀 Observations and changes 👀👀👀👀👀👀 27.10.25 VW27 noticed some min burnt tips so I decreased Calcium Nitrate 45 to → 40g, decided to add two more elements micros and Epsom salts just to make sure they got everything, Fetrilon Combi 1 (Micros): 0.5 g, Epsom salts: 8 g 28.10.25 VW27 she seems devoid of any deficiencies, seems ready for the flip to 12/12 02.11.25 VW27 girl is looking good so I decided to stop making daily videos and do a standard once a week update. 09.11.25 aVW28 7 days since flip,stretch in full swing, first pistils showing, leaf color deep and healthy. Slight tip burn early week → gone after pH stabilized. Feed stayed clear, no residue, roots clean and sweet-smelling, did what I hope is a last cleanup and pruning🎥 10.11.25 VW29 added Phosphoric acid pH down to the schedule for flowering stage. 14.11.25 FW1 FERMAKOR PK Micros 40 → 50 ml 23.11.25 FW2 got some burnt tips, observe and act accordingly in case it worsens, diluted by 25% for this week. 05.12.25 FW3 about 2 weeks ago Calcium Nitrate 35 g → 25 g, FERMAKOR PK Micros 50 ml → 60 ml 12.12.25 FW4 Calcium Nitrate 25 g → 20 g, FERMAKOR PK Micros 60 ml → 80ml 16.12.25 FW4 Calcium Nitrate 20 g → 17 g, FERMAKOR PK Micros 80 ml → 110 ml 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 🌿 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 Fed about 5l a day of #1 and on the weekends I do a pure FERMAKOR PK flush 2l runoff (*RUNOFF reused for tomato plants) 💧💧💧💧💧💧💧💧💧 🌱 Nutrients in 30 L #1 Veg – FERMAKOR 💧💧💧💧💧💧💧💧💧 Calcium Nitrate (Calcinit / Nitcal): 45 → 40 g → 35 g → 25 g → 20 g → 17 g = 1.50 g/L → 1.33 g/L → 1.17 g/L → 0.83 g/L → 0.67 g/L → 0.57 g/L = 207 ppm N / 253 ppm Ca → 184 / 225 → 161 / 197 → 115 / 141 → 92 / 113 → 78 / 96 PK Concentrate (FERMAKOR Base): 30 → 40 ml → 50 ml → 60 ml → 80 ml → 110 ml = 1.00 → 1.33 ml/L → 1.67 ml/L → 2.00 ml/L → 2.67 ml/L → 3.67 ml/L → balanced 1:1 P:K + light micros (from extract) Home-made FFJ/FPJ (Fish + Veg): 30 ml = 1.00 ml/L Epsom Salt (MgSO₄·7H₂O): 8 g = 0.27 g/L → ~26 ppm Mg + ~35 ppm S Fetrilon Combi 1 (Micros): 0.5 g = 0.017 g/L → Fe 0.7 ppm · Mn 0.7 ppm · Zn 0.3 ppm · Cu 0.3 ppm · B 0.1 ppm · Mo 0.02 ppm Phosphoric Acid (pH down) + Citric Acid (chelation): as needed → First set pH with phosphoric acid, then add a little citric only if you want extra chelation Target pH: 5.8 – 6.0 (drop test yellow-green) 📦 TOTAL: Liquids: 60 → 70 → 80 → 90 → 110 → 140 ml per 30 L = 2.00 → 2.33 → 2.67 → 3.00 → 3.67 → 4.67 ml/L Solids (CaNO₃ + Epsom + Fetrilon): 53.5 → 48.5 → 43.5 → 33.5 → 28.5 → 25.5 g per 30 L = 1.78 → 1.62 → 1.45 → 1.12 → 0.95 → 0.85 g/L YouTube Link: https://youtube.com/-m8h?si=A7x4Zlr2kj-_ga31

This grow went pretty well she was a very branchy plant, responded well to lst providing me with a wealth of super sticky buds. I had a slight deficiency problem but that was on me. I didn't do a wet weight when I cut her down. All the buds are super sticky and have a nice citrusy lemon smell that you would hope for from any lemon strain. I will definitely be growing this strain again. I will update final weight and smoke report later after the dry and cure. Made some rosin with trim and popcorn buds at bottom of bowl trimmer. Put in about 14 got like 2 a lil more than 2 gs back.

Got lazy and havn't posted in a few weeks, this is week 12, the plants were quite yellow in the last few weeks and the natural fade came in too making the plants look a bit fucked but the buds are firm and plumping up, the trichs are milky but not much amber, il run it for another week and chop it down then I think, looks like it will yield a bit less than my last grow but really looking forward to smoking and vaping the nugs once dried and cured!😀

I think this is the part where patience is truly tested, so far she’s doing fine I believe! Last few weeks of flowering ahead I presume? Past week has been cloudy so I’m just hoping for a bit more sun coming week!

Tydzień 5 / dzień 29.

Looks like she ran outta nutes, leaves are showing some deficiency signs (in my POV nitrogen). So I started feeding her with a diluted mix I normally use for my bigger girl in bloom — around 500 PPM. Let’s see if she bounces back. Honestly, I’m not a fan of growing in soil… but that’s probably ‘cause I don’t fully get it yet. You gotta stay on top of things and fix issues as they come. In coco? It’s pretty much autopilot.

Ultime settimane.siamo arrivati al finale anche con queste quasi...bella e sicuramente anche buona😜🤤😂 profilo terpenico forte intenso .un profumo delizioso...quando proverò questa strawberry 🍓 banana 🍌 vi racconterò com'è di sapore e potenza...le cime sono dure dure come una pietra

Willkommen zum Ende der 7 Blütewoche mit der Orange Sherbet FF von 420FastBuds. Wir sind am Ende der siebten Blütewoche angekommen. Anfang der Woche haben Sie ein letztes mal die volle Dosis Nährstoffe bekommen. Heute am Ende der siebten Blütewoche geht's los die Ladys nur noch bis zum Ende der Blüte mit Leitungswasser zu gießen. Das Leitungswasser lass ich wie immer abstehen bis zum nächsten Gießen. Das Leitungswasser wird bis zum Ende angepasst auf einen PH Wert von 5.8. Die Orange Sherbet FF duftet einfach nur hervorragend und hat mega dicke Fette frostige Buds die wirklich gestützt werden müssen weil sie sonst den Boden küssen. So meine Growmies, Danke fürs vorbei schauen und sag einfach mal bis zur nächsten Woche. Falls ihr Lust bekommen hab auf die Nährstoffe die ich nutze ,schaut gerne bei Hesi vorbei 💛👊💛 https://hesi.nl/de 💛💛💛💛💛💛💛💛 Much Love GrowWihtFlow 🍀 👊 🍀

Green Cure CBD Auto germinated and has sprouted easily. Every seed I started all germinated. So she is getting acclimated, and should start growing very soon. Everything is looking good. I did provide a light feed to help with ph stability in coco. She is off to a good start. Thank you Medic Grow, and Zamnesia Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.

End of week 6, Beginning week 3 of flower for the OG Kush auto🍓🌱 Plant filled up the 60x60 cm tent entirely, and keep on stretching! And to think i was worried at the beginning that this plant won't get big 🤦🏽😅. I noticed some leaf curling/burning a bit, and some bleaching of 2 small leafs (not so sure about the bleaching), so i lowered the intensity of the cree cobs led to total 220W. This happened to me in my last grow (zkittles auto) as well. I guess the cobs can get too powerful for a small tent like that. I'll definitely keep an eye on that issue. Other then that all goes smoothly;) - I do some light defoliation to the plant every day, - in the next few days I'll do the big cleaning - lollipoping 🍭 and full defoliation. P.s - sorry about the bad lighting in this week's photos, I'll fix that next week✌️🏽

Sweet Seeds - Spannabis 2025

Fed with plain water 6/17/26

Greetings family, week 7 in the books. These girls are booming.im currently doing a 12/12 lighting schedule @ 950 ppfd for a DLI of 42 (fingers crossed). Nothing crazy hasn't been happening as of yet. There're greedy and happy as far as how i see it. Not too bad for a wanna be lol. My stoke levels has increased.

Finally into the last week of flower. It's been a long road, but the end is near and I couldn't be more excited. She has definitely bulked up over the last couple of weeks. The trichomes are milky with a few Amber's showing. I am busy flushing. I'm going to put her into 48 hours of darkness before I chop. Wish me luck.

J-33 Lemon Power Haze de Zamnesia Seeds Bonjour la communauté GD ! Après avoir découvert ce site étonnant, nous nous embarquons! Nous sommes 2 grands passionnés prêts à partager, apprendre et recevoir tout ce qui est possible sur ce sujet! Floraison J-11 (12h / 12h) Pousse très bien, Plutôt haute par rapport aux autres genetiques. A bien commencé sa floraison très impatient de voir la suite !!

🍂 Der Herbst ist im Zelt angekommen 🍂 In den letzten 10 Tagen hat sich in meinem Auto-Zelt nochmal richtig viel getan. Heute gab’s das letzte klare Wasser, und am Donnerstag wird entschieden, ob sie fällt oder noch ein paar Tage bekommt. 🌿 Man sieht’s deutlich der Herbst ist angekommen, die Farben sprechen für sich 🍁 Ein Traum geht langsam zu Ende… und öffnet die Tür für das nächste Projekt 🚀 🌸 Sorten: • Auto Orange Amnesia XL • Blue Dream Auto • Auto Amnesia 47 XL • Red Velvet Auto 🌱 Samen: @ganjafarmer.seed

Sie wächst und erfreut sich. Man muss sie aufjedenfall nach dem umtopfen nicht mehr groß trainieren.