Likes
5
Share
Da kann es ja bald in die Blütezeit gehen. :D
Likes
25
Share
my dry and cure style is this: 4 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 4 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. buds are one of the hardest as fucking rocks type of buds! very dense , compact , sticky , smelly , amazing at every aspect growing stage was 60 days and flowering stage was 70 days total (harvested tops at day 63th) the total weight of dry buds was : top buds 174 G + lower buds 55 G = 229 G my overview of strain with details: the seeds: unfortunately i only got 1 seed cracked out of 5 so i will not know how much this genetic can get different but at least i got the chance to grow once of this wonderful strain the plant : in every stage you can ensure that you are dealing with a high level plant , she will get big so you have to control her height LST and SCROG highly recommended , will grow very well with tick stalks and big fan leaves , has good resistance for stress and will respond very well to stress trainings , she really has gorilla power in herself , fresh buds on plant : buds are very compact and dense even from start , fresh blossoms smells like pineapple and mango , 2 different shades of sweet smells like you hold 2 junks of pineapple and mango in your hand and you smell them together, she is a trichome and resin factory , very very sticky , very oily , strong smell dried buds: very compact and dense , hard as rocks , has dark colors with purple hues inside it , it smells sweet smoke : very smooth and sweet like lollipop , pineapple , mango like , after 2 minutes it'll kick in and you'll get higher and higher with every breath , has a strange and especial high mind high mostly
Likes
35
Share
@SAC87
Follow
Hi Growers. These little plants have been cruising along just fine. The whole week they have just been sprayed with ph RO water with a touch of cal pow. Yesterday I noticed they were a bit lighter in color and using peat based medium with zero nutrients I decided to feed according to the FastBuds suggested 1/8 strength. It still ended up being around 225 ppm. I also raised the light 3” as I noticed the serrated leaf edge starting to point straight up. That SF4000 is a beast against tiny plants even at 30%. I’ve got the environment at approx 77 & 60% with a oscillating fan and humidifier running. All in all they’re looking happy and are doing what they should be. 🤞👍🏻🌱 Happy Growing 🌱
Processing
Likes
2
Share
@Pauwela
Follow
9/2 Sunday, Flowers appearing everywhere, 9,6 trimmed solar leaves 3rd time 47 days old
Likes
19
Share
@Teydoee
Follow
First week of Flower and the girls are doing well. Skipped week 8 because there wasn't much of a difference from week 7 besides small curling of a few leaves. Problem assessed and fixed so no worries.
Processing
Likes
14
Share
@Gugne
Follow
Both of them sexed already, the little one yesterday and the big one today that's why i'm there with new photos before usual, lol. The new branches looks well. And have a bonus, pics of my last harvest as a click bait lol.
Likes
15
Share
Likes
170
Share
@nonick123
Follow
Dia 1 (17/01): La semilla ha germinado! (+3 días) 💥 Enciendo la lámpara del armario a PPFD 225 Dia 2 (18/01): Fuerte y vibrante plántula Día 5 (21/01): Las plántulas se han estirado ligeramente, por lo que subo a PPFD 300 Día 8 (24/01): Las chicas están asomando las raíces por la parte inferior de la maceta. Parecen fuertes! Nutrients by Gen1:11 - www.genoneeleven.com Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
13
Share
👉Dropped Seed into solution of 1:16 H202/ H20. After 48hrs the shell split and the tap root started peeking out. Then placed in black plastic container between two squares of cellulose fiber towel and soaked in the H202/H20 solution. After 24 hours the tap root has grown to 1/4" and was then placed into the media. The plant emerged two days later and is healthy.
Likes
10
Share
Day 78 from seed This week was a big learning curve as may have dodged a bullet and improved yield . Finally changed res after 3-4 weeks thinking I could get through to harvest I was wrong ppm was spiking to 2200 after multiple water top ups Figured plant wasn’t up taking nutes and had some sort of lockout , ph dropping aswell 5.5 ish Res was salty all over , was way over due , note to self add nutes gradually to reach desired ppm, I gave her what little nutes I had left ( could have more ) Settled around 1000 , seemed to uptake them in two days to settle around 750 , ph at recommended 6.3 , buds changed within a day ! Had to tie her up as she was leaning badly after res change, may invest in a pump to make things easier. Look to be ripening , putting on weight ; pistils browning :)
Likes
10
Share
@Froggman
Follow
Thickening up nicely! Got some nutrient issues on the LSD, but not nearly as bad a previous grows.
Processing
Likes
34
Share
Seedsman Auto Sour Diesel Haze coming up!!!👍 I love the Sour Diesel strain so I'm really looking forward to this one. Also, the Seedsman Auto Lemon I just harvested was very impressive. I'm going to go lighter on the training from now on because I want to be done by end of May/early June. My grow is in the attic and its gets crazy hot there in the summer, even in VT. My Perpetual Harvest strategy…. Originally my plan was to start 2 seeds each month, but had some seeds from one breeder that did not germinate early in my rotation. Ultimately, this caused single seeds to pop and messed up my 2 at a time plans. But, that seemed to work out OK, because now I think starting one seed every 3 weeks is a better strategy. This should provide me with 4-5 plants at a time, instead of 6. However… Since I need to shut down over the summer because my tent is currently in the attic, I’m starting 2 seeds at at time for the last couple of rounds. Plants get fed once weekly on weekends. Seedlings get water only. Plants in vegetation get water and Recharge. Flowering plants get water, Recharge or Big Bloom (Fox Farm). Feeding is done using 2 gallon watering can. Any additional waterings during the week are given on an as needed basis per plant. I lift the plants to help determine which plants are more dry (lighter) and provide water any plants via water bottles and watering spikes. I give each pot a quarter turn every day in an effort to make sure the plants get equal lighting from all sides. I rotate the plant in place by turning the pot 90 degrees (I am not rearranging the layout of the plants in the tent on a daily basis). The soil is an ‘organic super soil’ I mixed myself using organic top soil, organic potting soil, organic compost, organic peat moss, organic perlite, organic vermiculite, lime, epsom salt, expanded clay pellets and Jobe’s organic fast start. I am also recycling my soil and water with Recharge when using recycled soil. For plant training I have tried a variety of things, but my plans now are to do LST bending only, no HST anymore. I may decide to go back to HST again in the future, but I’m curious to compare LST training only to see how that goes. Around 3 week I'll do a FIM cut/pinch once there are 4-5 nodes established. And some defoliation around the 3rd week of flowering. I have been doing HST bending and having good results, but think the HST may be causing the plants to take longer to harvest. I hope LST only will help increase harvests while getting me to harvest sooner. Setup: 1- Grow Tent 24”x48”x72” 2- Viparspectra 300W LED’s (1-V300 & 1-R300) 1- Hanging 100w CFL (26w actual) 1- Carbon Filter w/ 190cfm Fan & 4” ducts 1- 6” clip-on fan 1- 700w electric heater - oil filled radiator (in front of air intake behind tent)
Likes
19
Share
Legend Timestamp: 📅 Measures: 🛠️ Water: 🌊 Actions: 💼 Thoughts: 🧠 Events: 🚀 ________________________________ 📅 D22/V20 - 14/09/23 🛠️ EC 0.8, pH 5.8 🌊 💼 🧠 CO2 Dispenser is working good, it should deliver some CO2 trough the pipe 🚀 ________________________________ 📅 D23/V21 - 15/09/23 🛠️ 🌊 💼 Added some workers to bend her down 🧠 🚀 ________________________________ 📅 D24/V22 - 16/09/23 🛠️ EC raised up to 1.2, pH trend is down 🌊 💼 🧠 I'm going to change the water in the next days 🚀 ________________________________ 📅 D25/V23 - 17/09/23 🛠️ 🌊 💼 New workers at work to let her stay down and down 💼 💼 💼 🧠 Now Capitan America and his bike is bending the main bud and the CO2 is provided by NASA 😋 🚀 ________________________________ 📅 D26/V24 - 18/09/23 🛠️ EC is 0.9 and pH is 6 🌊 💼 Added LST with men at work and made some defolation 🧠 🚀 ________________________________ 📅 D27/V25 - 19/09/23 🛠️ EC 0.9 pH 6.2 🌊 💼 LST and new bending 🧠 🚀 ________________________________ 📅 D28/V26 - 20/09/23 🛠️ 🌊 RES Changed 💦💦💦 💼 Added very little bit of silica powder to the water 🧠 I let the plant absorb it along the night and changed the water again in the morning. It's the first time I add a silica to my grows, waiting to see what is going to happen 😉 🚀
Likes
18
Share
He who stops is lost, as an old saying goes I don't know exactly what the origins are, so here's a new Zamnesia season. We are in the middle of winter and despite growing in an area that isn't the warmest in Europe, it's really cold now. It's 16-18 degrees Celsius in the house and we need to bring the temperature of the propagator growbox between 20 and 25 degrees Celsius. So we first placed a layer of those 1 cm thick "rubberized" floors that are used for gyms, they are easily found on Amazon and are very useful for insulation. Then a heated resistance mat and then the closed propagator on top. Inside with our seedlings and the light on at minimum 20% we reached 24 degrees, not bad in fact the germination is proceeding very well. 100% opening of the seeds in water and almost all of them are opening in our biodegradable peat pots. ----- Our DO SI DOS F1 Hybrid Auto were born really quickly. About 24 hours in water and the two seeds had hatched, another 24 hours in soil, and off they went, born on 01/12/2024 on our identity card we have this date. Special signs, very cute, one had a small placenta problem but the father solved it immediately. In a Indica Dominant probably running in AWC, let’see the results. WARNING: Placenta Problems ---- ALWAYS look very carefully at the seedlings, if the seed or the placenta prevent the opening of the cotyledon leaves the plant dies after a while. Remove it delicately as if it were a condom or almost. I apologize for the example but it gives the idea, remove slowly and delicately please. WARNING: If you choose biodegradable pots, choose the largest possible ones and not paper/cardboard ones, there is peat which is the main component of most of the soil we use. If you want to avoid transmitting vibrations to your neighbors I recommend you install one of these gym floors under your growboxes, I did it and I also feel safer not to disturb. They are easily found on Amazon in different thicknesses, I took a gym model that is assembled like a puzzle, they are also found in children's shops, they are those floors that are assembled to make children play safely, or to train and to avoid vibrations from equipment or of any kind. Everything will be grown Plagron Pro Mix with 100% fertilizers let's start with Power Roots 1 Ml/l Plagron fertilizers are available on Zamnesia in convenient Pack formats for all growing styles. I used this with a simple search you can find the other products. ---- https://www.zamnesia.io/en/12119-plagron-top-grow-box-100-natural.html ----- Try DO SI DOS - F1 Hybrid Automatic, the entire F1 line is highly recommended for autoflowering lovers and beginners who will grow great weed with little difficulty and at their first attempts ---- https://www.zamnesia.io/en/10664-zamnesia-seeds-do-si-dos-f1-automatic.html Zamnesia Description // From the team at Zamnesia Seeds comes Do-Si-Dos F1 Automatic. Using consistent and reliable F1 genetics, this strain is not only incredibly easy to grow, but also offers potent and delicious buds. The plants remain small and offer a reliable growing experience that everyone will enjoy. Growbox and Air System - Secret Jardin DS120w + fans + Exhaust fans and filters DF16 kit Light - Viparspectra P2000 https://www.viparspectra.com/products/viparspectra%C2%AE-2024-updated-p2000-200w-led-grow-light-with-daisy-chain-function ---- www.zamnesia.com
Likes
29
Share
D63/F15 - 11.21 - Really good week of growth. The purple in the leaves and prebuds really makes this lady stand out. She's gorgeous. D67/F19 - 11.25 - Everything is looking great. Got her all defoliated and ready to churn out chunky monster purple buds
Likes
11
Share
here they are! 2 beauties. I plan to apply all existing stress techniques to them. topping LST HST Mainlining and so on. Most likely I hang them in one pot. I have experience growing 2 plants in 1 pot and it works great.