27/05 - Day 1 of Veg(1L of Nutrients dissolved in water poured into the tray) 1/06 - Day 6 added toothpick to help give support 2/06 - Day 7 checked on their root development, so I can transplant (Tomorrow we transplant)

13.06. Wedding Cake 1# Day 49# The plant is at the end of the seventh week, it is making excellent progress. I don't want to spoil it and speak in advance, but I think she will be a monster, but just let her be healthy! Wedding Cake 2# Day 43# Unlike the first one, this one has only entered the seventh week, it is in 3 times smaller pot and the soil is not even close to the quality like in the first one, so I am satisfied with the progress of the second one as well! 5 nights ago there was a strong storm, the morning after the storm when I came to the site, I found some plants crooked, some normal, but there were no broken ones, thank God, but they were very stressed and what you can see in the pictures appeared on the leaves, some leaves were crispy at the edges, but still green, mostly shoots before the newest ones. I haven't had this problem before, I researched a bit on the internet and came to the conclusion that the wind burned them, and I also turned to GW for an opinion, two characters confirmed my opinion. Two days later I noticed that the matter was getting worse and that it was spreading, which worried me, so I contacted GW again for an opinion. Some told me that it was mold, some that it was an infection, disease and so on, mostly guesswork, but no one specifically told me what was certain, so I decided on nim oil, and whatever it is, I guess the problem should be solved. According to some leaves, I would say that insects might be the problem, but I really don't know, I haven't had similar problems before. I regulate the ph of the plants, I still don't feed them, there is food in the ground for another week, except for the fact that I added cal-mag after that storm when I watered them. I want to say that the plants are certainly not locked, and the heat is not yet so high that this would happen from the same, the more the temperatures have dropped and now it is perfect. Since transplanting, I have watered the plants only 2 times. Yesterday morning they were topped for the second time, only the main branches, I will do the next topping of the side branches. Last night I sprayed the plants with neem oil and already today the problem seems to be going away, if I tripped at least it doesn't spread further, that's for sure. I didn't mix the oil very well, I didn't add any soap or anything like that because I wouldn't really spray the plants with any chemicals, and on some of the leaves on one or two plants there is that thick, brownish liquid, so I hope it won't hurt them, I noticed that today during the day, I couldn't see it at night. I still don't know what the problem is, but my guess is still that the wind burned them or some insects. Speaking of insects, I think I noticed thrips on one plant on the underside of the leaf, so in addition to the neem oil I already gave, I also ordered SMC, so I will spray that at least once a week while they are still young. Happy Growing and Stay High!!!

W15 - after successful ✂️ topping ESTHER recovers well. It seems like she is focusing now on developing her branches (9 pairs of them 😁 ). Using garden wire I spread branches out to let the sun rays make their magic 🌲💥 So she can become furrier and prettier 💃🏼

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.

KRISE! Beim Gießen gestern im Augenwinkel ein dicken fast hängenden Blüten Kelch entdeckt doch beim entfernen kamen Pollen raus vermutlich muss ich sagen. Da ich nicht richtig hingeschaut habe und des ding gleich unter wasser zerdrückt. Habe sie noch mal gründlich untersucht und nichts gefunden! Ich ziehe durch und kontrolliere die sehr genau.

Week 7 veg! In today's video we top all the plants except 2, and put up some LST on some of them. The last time I fed them was when they received their transplant. Unfortunately one of the plants did not make it, it was the one with the severely burnt fan leaves. Hope everyone's doing well. Cheers!-G.I.JOSE

Hello everyone 🌱 I’m writing this while walking by the sea, reflecting on the next run. I’m currently smoking some White Russian from my last grow, and I have to say… it really surprised me. I’ve always had a simple philosophy: life is short, so I try to grow as many different strains as possible instead of repeating the same ones. But this time, Serious Seeds really got me. White Russian, Bubblegum, AK-47… these are not just strains, they have a very strong identity. In particular, I found a White Russian phenotype that I would definitely keep and grow again. I regret not cloning it. That experience made me appreciate even more the work behind these genetics. Each strain expresses something unique, both in structure and effects, and that’s something I’m starting to understand more deeply. ⸻ About this run I honestly didn’t expect this opportunity. I reached out to Serious Seeds without big expectations, and they gave me the chance to test one of their new strains: 👉 Fruity Durban (Serious Mimosa × Durban) This is currently a test strain, so I’ll be growing it almost completely blind. I deliberately avoided researching too much about it. I want to observe it for what it is, without external influence. ⸻ Constraints & approach Due to where I live, I can only run one plant, which means I won’t be able to explore different phenotypes or evaluate stability. So this will be a more focused test, centered on a single expression. At the same time, this run will be more challenging than usual: • I’ll likely be harvesting in mid-summer • high temperatures could impact terpene preservation and plant stress ⸻ Living soil system I grow in a living soil system (113L pot), which I like to think of as a bioreactor. Before starting, I reactivated the soil by: • adding fresh worm castings • light top dress amendments • reintroducing clover as cover crop The goal is to rebuild microbial activity before transplanting. ⸻ Philosophy for this run Unlike my previous grow, where yield was very high, this time I want to focus on: 👉 terpene expression and overall quality For this reason, I’m considering a very light-touch approach: • minimal training • possibly a single topping (to avoid excessive main cola density) • otherwise letting the plant express itself naturally I don’t want to interfere too much. I want to observe. ⸻ Germination I started by placing the seed directly in a glass of water. I decided not to use H₂O₂ this time, in my experience it can help, but it’s not essential. Now we wait. ⸻ I’m really curious to see how this strain will behave in this environment, especially in these conditions. This will be a journey focused on observation, learning, and quality over quantity. Let’s see what comes out of it 🌱

10/28 - (2x2-4x4) Both tents running at 18/6 (Clones) - flush feeds next 2 weeks - flipping into flower by next week - had a small PH issue since addressed.

First pistils came through this week! Switched the 'bloom' switch on the light to double LED count and add the red to the spectrum. Defoliated lower growth again on day 45 before noticing the pistil 48 hours later. Spotted a nutrient burn, and that I haven't been watering until enough runoff so possible nute/salt buildup? I also realised the plant was drooping before feeding so going to increase feed volume to keep the coco more moist. A nice amount of main colas considering her rough childhood. Fed no nutrients from day 47-49, just feeding 5.8pH water to reduce salt content. Water was 60PPM at 5.8pH and after 8L still got 500PPM runoff. Definitely need to change feeding method. Thanks for the tips to those who answered!

Curing time. Doing it in jars. I feel like only half the product is full and thick and other half loose and stringy buds. I had many issues getting it right for my first time which I believe led to this. One is watering which I didn’t fully grasp until too late, other is over doing nutes, then I had temp issues. Learning a lot and really happy that I was able to harvest anything.

Nothing much happened but she's looking good.

Here we go for another run. I was recently made aware that a seedy I had germinated was not what i thought I was, so here I am making it right with a tastebudz seed directly from their website. 😁 The strain I have chosen for this run is moon berry. Germinated in a coco coin that has been soak in water with a little bit of mycroboost from living soils. At 25 degrees and between 70-80% humidity. This run will be an organic living soils run. Coco coin has been planted straight into her final pot, which is a 5gal fabric pot. Soil is previously amended but was only used for a week. Using Biobizz light mix and worm humus along side living soils amendments and beneficials. Mulch is made up of cover crop which was chopped dropped and reseeded. Soil also has worms in. Light is marshydro led 150 watt first week running only 1 at 25% 45cm away from soil. Light have been running 20 hours a day this week now dropping to 18 while the power is upped to 50%. Only one 4” fan running atm with no extractor this week and only this seedling is in the whole 80x80cm tent. I am buzzing to get this going. Let’s get this work! 💪🏽💪🏽💪🏽💪🏽

Day 7 - 1 plant is a little behind but all In all everything seems to be going great! Thanks for following & happy growing friends!✌️🏼🌱 Day 8 - All is well! Happy growing friends✌️🏼🌱 Day 9 - Ladies got fed today! Still doing good! Day 10 - Getting bigger🌱🌱 Day 11 - Got water today at 6.5, One is still growing a little slow but overall going great!👍🏼✌️🏼🌱 Day 12- Really hoping the slow one catches up the others are growing quick! Day 13- Got water today at 6.5 PH, will get fed again Monday!

Day 12 of organic grow and all is well. Seemed to have dialed in the conditions and able to keep good air movement, CO2 levels, and consistent temperatures/humidity with the ThruWall Closet Fan (Model TW108 ), and the Holmes Twin Exhaust/Intake Fan (Model HAWF-2041). Humidity is maintained with a Lovoit 6L Ultrasonic Programmable Cool Mist Humidifier (Model# LV600HH). Added a SCROG screen (just a cargo net) and bought the Sample Pack of organic nutrients from Nectar for the Gods (just pay shipping and they will send you the sample nutrients - check out the website). People say their line of nutrients make the buds smell and taste like no other! I have always been an organic Earth Juice nutrient guy, so I am going to experiment with combining the two. Lights are on 24/0 and she has tight internodal spacing with good vertical growth. Room that closet is in is beginning to smell skunky at times, and like diesel at other times. Will begin light organic nutrients with next watering. If you made it this far, please check out my other autoflower grows. Day 13 - Watered today with very low strength nutrients added. - Zannabis7

First time taking clones. Took 6 and 6/6 rooted. Put 5 in the grow tent and eventually took one out to make space for the dehumidifier.

6/14 - feeding and removal of dead and dying leaves. 2L distilled water 6.0ph 71.4*F 855ppm Bloom 2.9g Kelp 0.56g B-Vitamin 0.61g Cal/Mag 0.4g Full Up 0.17g OminA 0.4g Microbes Bloom Stage 1.5g Enzymes 0.18g Terpinator 12ml Real Growers Recharge 0.1g Rezin 4ml 6/17 - feeding 6.0ph 71.6*F 895ppm Bloom 3g Kelp 0.49g B-Vitamin 0.64g Cal/Mag 0.43g Full Up 0.19g OminA 0.25g Microbes Bloom Stage 1.49g Enzymes 0.16g Terpinator 12ml Real Growers Recharge 0.1g Rezin 4ml 7/20 - flush feeding

hello growmies! day 51 finally the pre-flowers begin to appear. I apologize for the few photos but unfortunately they really filled the box and I find it difficult. overall I have to say they look in perfect shape! I will keep you updated thanks for passing by. like and comment! good day and beautiful growth to you 🌳🌱

So this week I added nutrients for the flowering stage. I gave her a little trim as well as added her netting. I flipped her on last Sunday PP

For LIQUIDS & Nutes ******GREEN BUZZ NUTRIENTS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.