Likes
Comments
Share
Welcome Back!💚 Die erste Blütewoche ist ins Land gezogen und die Pistolen an den Blütenansätzen zeigen sich durchweg. Der Stretch war bisher moderat und dennoch spürbar. Nach dem Umzug in das größere Zelt, war es nun an der Zeit den Greenhouse Feeding Dünger einzuarbeiten und mit dem dazugehörigen Bioenhancer zu gießen. Ich bin sehr gespannt, wie sich dieser Strain entwickelt. Die Werte im Zelt sind optimal auf die Blüte eingestellt. ——————— 🌞 Temp: 24°C 🌚 Temp: 20 °C 💨 RH: 56% VPD: 0,97 kPa 😎PPFD: 830 mqm ——————— Stay Tuned! 💚
Likes
2
Share
@Scannr
Follow
It was harvested slowly. First up bud and 3-4 days later down bud harvested. Very nice harvested
Likes
19
Share
@hooolian
Follow
22/11/21 thanks to the grow diary community realised there was a slight over watering issue and nitrogen toxicity. Have lowered the bio grow to 0.5ml per litre and introduced 0.5ml bio bloom as will start flowering period next week. defoliated the plants on the bottom branches to promote growth of the higher ones. Will now only water once every 3 days not every other day. 350ml of filtered water. - Lights are at 80% brightness for final week of veg. 25/11/21 defoliated largest fan leaves near the base of the plants - bud sites are appearing in light green
Likes
8
Share
@Hawkbo
Follow
On cruise control now, done some defoliation here and there but that's it, feeding every 2-3 days and they are swelling up very nicely. I took a nice slow video instead of photos of each plant individually below is the order they appear in the video. 1st is 31? 2nd is #29 3rd is #35 4th is Orange Sherbert 5th is #33 6th is Wedding Cheesecake 7th is Wedding Cheesecake #2 8th is #37 REMEMBER , IF YOUR SHOPPING FOR GEAR YOU CAN USE THE CODE “BANGDANG” FOR 10% OFF YOUR ENTIRE PURCHASE FROM ANY OF THE FOLLOWING COMPANIES. @greenbuzzliquids @rainscience_growbags @gorilla_grow_tent @growlightscience.led NEW* @Rocbudinc Seeds on his website * *****Gorilla grow tent discounts extend to all companies affiliated with grow strong industries which include..***** @super.closet Lotus Nutrients Kind LED grow lights
Likes
2
Share
Leaves are getting more yellow. Light burn? Turning the light down to 18 hours soon
Likes
72
Share
@Roberts
Follow
Auto Maxi Gom is doing really well. I started adding the master bloom from Xpert Nutrients to the diet a few days ago. I did trim up her lower side a little more. She has stretched a few more inches since last update. Her colas are starting to develop, and looks like she will start bulking very soon. Nothing more to report at this time. Thank you Medic Grow, Seeds Mafia, and Xpert nutrition. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
37
Share
🌱 Germination Journey with Terpyz Mutant Mentha de Croco 🌱 Hey Grow Fam! Today kicks off an exciting adventure with Terpyz Mutant Mentha de Croco genetics. I’ve got 10 regular seeds ready to sprout, and I’m looking forward to discovering some beautiful female phenotypes—and maybe even a standout male for potential future breeding. It’s been a while since I’ve worked with regular seeds, so I’m thrilled to dive in! Germination Process Overview: Here’s a step-by-step rundown of the germination setup and process, with a special focus on the equipment and nutrients that are helping these seeds thrive right from the start. Step 1: TheCannaKan Germination Pod 🌱 For germination, I rely on TheCannaKan—a device I’ve come to love and trust. It’s designed to create the perfect microclimate for seed germination, and within just 24 hours, the seeds started showing signs of life. By the 32-hour mark, they were all ready to be transferred to the next stage! I can’t recommend this gadget enough for anyone serious about getting strong, early growth from their seeds. • Why TheCannaKan? • Humidity Control: Ensures seeds stay hydrated without oversaturation. • Stable Temperature: Maintains an even temperature around the seeds, so there’s no shock or stalling. • Enhanced Oxygenation: Keeps fresh air circulating, helping prevent mold and ensuring seeds don’t suffocate. Step 2: Transfer to Root Riots & Aptus Holland Supplements 💧 Once the seeds were sprouted, I transferred them into Root Riots, known for their excellent water retention and structure that encourages strong root growth. Root Riots also have a pH-balanced, spongy texture that makes it easy for roots to penetrate, promoting sturdy, healthy root systems. At this stage, I started using Aptus Holland’s Regulator and Startbooster at 1ml/L each. Here’s why I chose these products for early growth: • Aptus Regulator (1ml/L): Helps strengthen the plants against environmental stresses by supporting cell wall structure. It’s a fantastic choice for giving young seedlings an early boost in resilience. • Aptus Startbooster (1ml/L): This product provides essential microbes and nutrients that stimulate root growth and early plant vigor. Especially for regular seeds, the early root development makes a noticeable difference in later growth stages. Step 3: Lighting with Future of Grow (FOG) LED at 200 PPFD 💡 For lighting, I’m using a Future of Grow (FOG) 600W LED. For the germination stage, I’ve dimmed it to around 200 PPFD (photosynthetic photon flux density), which provides just enough light for healthy, strong seedling growth without overwhelming them. • Why Low Intensity? • 200 PPFD ensures that young plants aren’t exposed to too much light, which could cause stress or stunting. This level of intensity is perfect for encouraging healthy development without risking “stretching.” • The FOG LED provides a balanced spectrum tailored to plant growth, setting up these young sprouts for success as they grow. Step 4: Environmental Control with TrolMaster Tent X Controller 📲 For monitoring and control, I’m using the TrolMaster Tent X Controller, which lets me dial in every aspect of the environment to make sure these little ones have the perfect conditions for germination and early growth. • TrolMaster Benefits: • Precision Control: Adjust temperature, humidity, and lighting all in one place. • Notifications: Sends updates in real-time to my device, so I can make adjustments as needed without being physically present. • Consistency: Maintains stable conditions around the clock, reducing stress on seedlings and ensuring they’re thriving. Grow Tips & Reflections: Germination is one of the most crucial stages in a plant’s lifecycle. Starting with strong genetics like Terpyz Mutant Mentha de Croco, combined with a solid germination setup and the right nutrients, creates the foundation for a successful grow. 💡 Quick Tips for Fellow Growers: • Hydration Balance: Don’t oversaturate! Moisture levels should be high enough for the seeds to sprout but not so wet that they drown. • Light Management: A low PPFD for young seedlings prevents stretch and keeps nodes tight, preparing them for a healthy vegetative phase. • Environment Consistency: Use a reliable controller like the TrolMaster Tent X to manage your settings, and consider monitoring tools for real-time adjustments. Shout Outs to the Community: Big thanks to Terpyz Genetics for these incredible seeds, Aptus Holland for their top-notch nutrients, Future of Grow for the stellar LED lights, and TrolMaster for the amazing controller. Also, shout out to all of you in the growing community—you make this journey exciting and filled with endless learning. Let’s keep growing and sharing together! That’s it for the germination update! Next up, I’ll be monitoring growth closely to identify strong females (and maybe a standout male for breeding). Stay tuned for updates on our Mutant Mentha de Croco adventure—this is just the beginning! Genetics - Mentha De Croco https://terpyz.eu/products/menta-de-croco-fern-type?_pos=1&_sid=e9237cbcb&_ss=r DogDoctorOfficial Discount Codes @ terpyz.eu - DOCTOR 15% off Nutrition - @aptusholland https://aptus-holland.com/ Led Power @ F.O.G. Future Of Grow https://www.thefuturofgrow.com/en/online-store/BLACK-SERIES-600-p489093171 Controls @ TrolMaster https://www.trolmaster.eu/tent-x As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so Growers Love To you All 💚
Likes
7
Share
I THINK THEY ARE DONE STRETCHING. GDP 1 IS 27.5 INCHES TALL. THATS BEEN HER HEIGHT FOR AT LEAST TWO DAYS NOW. GDP 2 IS 18.5 INCHESS TALL. #2 IS IN A 3 GALLON POT, I THINK THATS WHY SHE IS SO MUCH SMALLER. COULD ALSO JUST BE GENETICS. DAY 43. DAY 44: EACH PLANT HAS STRETCHED ANOTHER INCH. GDP 1 IS 28.5 AND GDP 2 IS JUST UNDER 20 INCHES TALL. NOT TOO BAD. LETS SEE IF THEY STRETCH ANYMORE. ITS SLOWED OVER THE PAST COUPLE DAYS FOR SURE. DAY 45: ADDED ENHANCEMENT PUCKS FOR FLOWER. 1 PHOTO RED FLOWER BOOSTER. 1 UVA TRICHOME BOOSTER. DAY 48: GDP 1 IS 30IN TALL TODAY. GDP 2 IS 20.5 INCHES TALL. BOTH PLANTS APPEAR HAPPY AND HEALTHY. LEAVING THE UVA TRICH BOOSTER LIGHT ON FOR THREE HOURS AT A TIME. DAY 49: GDP 1 STILL 30IN TALL. GDP 2 CLOSER TO 21 INCHES BUT NOT QUITE THERE.
Likes
57
Share
2020-07-21 (Day 62) This monster is growing about 10” a week. No sign of flowering yet but this thing is just insanely massive. You can see from the video that she dwarfs my other Autos that are done in about a week or so. She lost a large lower limb due to my murderous cucumbers 🥒. They climber the branch and broke her when I was away for a couple days. Stay tuned, hopefully flowering starts soon!
Likes
15
Share
@Uwish
Follow
Hello guys, Here I am again to present you a new run, still with the best leds of the market nevertheless as I changed my growing space from 120x120 to 150x150. So I had to update the material inside... I will run with 3 EVO 5-150 lamps of 320W or 960W with Bluetooth dimmers. For the Hydro system, it will be the V-SYSTEM from Alienhydroponics. In fertilizers I am always with Advanced Nutrients. I work with osmosis water. Currently, 4 clones took on 4. Once the roots are ready, I will transfer the cuttings from the propagator to the V-SYSTEM. ------------------------ since the 16/08, when I transplanted the plants in the RDWC system, I noticed some points that I will mention below and correct next time. 1. The cuttings are too small, allow enough time so that I can completely fill my pots with clay balls. 2. Cut out the bottom of the pots from the cuttings. 3. 3/4 of the cuttings are touching the water, so one is late. Next time when transplanting, add more water, up to the basket in order to immerse all the plants and not to create a difference between each one, consequence now I have 3 that are ready to explode and one that will struggle behind, problem corrected today by increasing the volume of water. 4. The b-52 is a real pain in the ass in RDWC, you have to clean the 2 filters almost every day, with this new soup I'm testing without and I think I'll continue like this just with the base sensi grow A and B, as I use Root rot X, I won't use voodoo juice since all the bacteria would be killed. 5. Use of Voodoo Juice is useless if using Root Rot X which will kill the bacteria. I don't know why but when I transplanted in the RDWC, I put my set up in growth mode, except that the plants were not ready for it, moreover, I made a FIM on each. So I lost some days, these last days I went back to a ppdf of 150, now that my roots touch the water, I declare growth 0 on 22/08, I will do between 21 and 28 days of growth. And as my roots are doing well and touching the water I'll go to a PPFD of 300 ++
Likes
6
Share
Eccoci qui... Ormai manca davvero poco ci siamo quasi.... Ora niente più fertilizzanti solo acqua ed attendiamo la maturazione.. Seguiranno aggiornamenti, grazie a tutti per il supporto🔥🌲❤️
Likes
8
Share
420 fast buds you guys doing really good work with your seeds ✌️🏻
Likes
37
Share
Harvested at day 85 and also filmed a video for best strain presentation video by @Fast_Buds so, wish me luck!! These pictures are took before harvest. Will be updated soon.
Likes
112
Share
ALRIGHTY THEN GROWMIES 😎 👉SHES PRETTY MUCH A BEAST , FROSTY AS HELL AND CANT WAIT TO CURE THEM UP AND GET SMOKEN 👈 👉I would recommend Shes the Mother of all Indicas 👈 Was a blast to grow thanks for hanging in there and following me on my journey👊 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 👉NutriNPK NUTRIENTS USED FOR FEEDING 👈 👉www.nutrinpk.com right now get 10% off using SPRING2022 👈
Likes
10
Share
The grow was good, we messed up a few times such as cutting one of the bud sites of Plant A when training but it ended up healing, and cutting off completely the main bud of Plant R which made it produce a lot of trichomes probably to try to survive. We struggled in the beginning with humidity because we did not have a humidifier but the girls were very resistant to the heat and low humidity and their growth was not stunted. I was surprised by how small their roots were in the end which is maybe why they were both quite small. Other than that it was quite easy to grow them and the end result was good so very happy with the grow!
Likes
11
Share
@MRTHC
Follow
things are still on the go..Looking at the tricomes the are still clear with hints of cloudy.. Coming along pretty well. Im just watering with plain water now and just enough for a light runoff. Ec is low already and I don't think I can get it to anything less. Just doing routine maintenence this week. There has been no change in the colour of the leaves and this is the 11th day of. plain water.. Its all a waiting game.. I also changed the light schedule to a 11-13...... its supposed to help in trichome ripening... I hope. 😀 The vanilla Kush looks ready but I'm not sure. If anyone has an opinion on how much longer please share
Likes
2
Share
@Little
Follow
Hola a todos! Hace unos dias que puse la malla, y he guiado las ramas que iban creciendo, un par de veces. lo dejare 1 semana más en crecimiento y luego a floración. Espero que la malla no se quede pequeña. ¿Qué tal lo veis? Gracias! Un saludo cultivador@s!
Processing
Likes
13
Share
Всем тем, кто следит за мной здоровья и удачи, надеюсь вы в безопасности. Наступило время вновь обновить «HiFi 4G» от «Dutch Passion» в далёких генах которого есть Fire OG. Уже четвёртая неделя от прорастания семечек. Прогресс на лицо. Я планирую выращивать клонов с нижних веток, именно поэтому я сделал дефолиацию на ранней стадии и не стал формировать крону, так как нижние ветки растения будут клонированы. Дефолиация полезна не только тем, что открывает свет боковым веткам, но также огромные листьев не забирают важные гормоны роста. В этот раз не стал добавлять какие-либо удобрения, а пролил обычной водой с пониженным PH. Так же я подключил дополнительное освещенье полный спектр LED по 27W. Теперь я оставлю растение в покое и буду ждать, когда отрастут ветки на клонирование. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- To all those who follow me health and good luck, I hope you are safe. It's time to re-update "HiFi 4G" from "Dutch Passion" in the distant genes of which there is Fire OG. It is already the fourth week from the germination of seeds. Progress on the face. I plan to grow clones from the lower branches, which is why I did defoliation at an early stage and did not form a crown, since the lower branches of the plant will be cloned. Defoliation is useful not only because it opens the light to the side branches, but also because the leaves do not take away important growth hormones. This time I did not add any fertilizers, but spilled it with ordinary water with a low PH. I also connected additional lighting with a full range of 27W LED. Now I will leave the plant alone and wait for the branches to grow for cloning.