Processing
Likes
Comments
Share
@GIJOSE
Follow
Most of the Clones are doing very well! There is two that I'm a little concerned about as you can see from the pictures they have a little bit of burn on them, I'm not sure if it's over spray or actual nutrient lockout. I am now leaving the top off for longer and longer periods of time to let the Clones get climatized to the environment. I hope everybody's grows are doing well. Cheers! -G.I.JOSE
Likes
10
Share
@Stork
Follow
Day 127 Mon Add water PH 5.8 EC 0.6 PPM 300 DLI PPFD Water 18 Day 128 Tue Flushing PH 6.0 EC 0.1 PPM 50 DLI PPFD Water 19c Day 129 Wed Add Ph Down PH 6.3 - 5.9 EC 0.1 PPM 60 - 50 DLI PPFD Water 18c Day 130 Thu PH 5.9 EC 0.1 PPM 60 DLI PPFD Water 20
Likes
73
Share
@LazLow
Follow
Kinda a rough week, everyone. I’ve been battling the flu all week and my energy is zapped. So firstly I had been growing increasingly annoyed of leaf clawing. I addressed overwatering and started only watering every 4-5 days and the girls responded well. I researched defoliation as much as I could and gave it a go because the plants weren’t getting optimal light. Might’ve overdone it, I’m not sure. Then came lowering the screens to begin scrogging. I’ve read probably every forum and article and looked at dozens of diaries; but it feels like when I’m tying branches to the screen it’s just stacking them on other leaves and blocking more light. I hate my LED, it’s probably only good for one plant. But today one of the bulbs went out, brand new light. I decided to buy a 315w CMH Light should be here next week. Live and learn. Should have done a single plant grow. It’s a new week though it will all work out. 🍁
Likes
8
Share
Frosty as heck but small buds, I might run it again with no lst and see if it gives bigger buds. Easy trimmer.
Likes
4
Share
First day of flower. Seeing some stretching and flowers. Looking very good this year. A lot of phytoplasma which I cut out last week. This week I only saw a few branches. Not a bad result Stem borers seemed to have died cause a lot of the wounds have filled in or maybe it's too late and I'll have horrible branch decay in a month .. Added some praying mantis egg cases
Processing
Likes
14
Share
@kevgrow
Follow
Hey Friends, end of Week 10 from seed Colas are looking Very nice Noticed some orange color on some leaf tips so I lowered the amount nutrition when feeding I used a magnifier to have a closer look at the colas, trichomes used to looked like little crystals, now they are bigger and cloudy. So far no amber coloring on trichomes I need some advice as to when I should begin flushing and harvest Smell is slowly getting stronger, like a muffin with a small touch of gas ⛽️ Looking Forward in seeing some bud growth in the following week, will keep you guys posted!
Likes
16
Share
@Kingseeds
Follow
Dark purple buds and frozen cola Finish in 67 days She needs normal light and feeding
Processing
Likes
6
Share
Such a top quality strain 🔝 very very terpy, stinks like OG kush, rock hard dense nuggets, they're literally rocks. Very frosty nuggets, full covered in resin flowers. Those orange hairs just make her irresistibly delicious 😋 I just can't wait to smoke such a high grade. This is gonna be a good year. Hope to always have this lady in my garden every year 🤤👨‍🌾💎🍪
Processing
Likes
8
Share
I have lost some photos you can't see very well but this small GSC fastbuds bonsai is at the beginning of flowering and it is not bad at all.
Processing
Likes
6
Share
@Heybuddy
Follow
Super proud of the way the manifold is turning out. So symmetrical! Between now and the next update I’ll be doing some defoliating. Get rid of some of the lower fans, create some airflow up top, and possibly remove the lowest set of growth tips on each of my main stems. Plant is flourishing and healthy but those leaves could maybe be more vibrant. Might be time to start introducing nutes to the reservoir. Edit: Added a video of the plant after defoliating. Ended up removing the bottom 2 nodes of growth except for the outer fan leaf on the top one. Also moved the soft ties up one node and adjusted where they’re anchored so they pull the stems apart more. Can’t wait to see what she looks like in a week!
Likes
99
Share
@DevilsBud
Follow
Anesia blackberry moonrock and imperium X will be put in the 100X100X180 with the TS-1000 so they can veg some more the black berry moonrock is looking very short stocky and bushy lest how she developed try the week Happy growings visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD 27/10/21 Transplant the black berry moonrock in 11L fabric pots added 5gram Easy Roots - Mycorrhiza Mix to soil Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
7
Share
@Adam22
Follow
These plants are extra bushy.. would of defoliated them more but I restricted them alot during veg in the small pots! They did take quite some time to recover from that I think I will just learn for next time
Likes
4
Share
5/21/25 beautiful plant. Yellowing is starting. Thinking it may be a magnesium def from using new Nutrients. Took some clones and should be putting her into flower soon 5/22/25 not sure whats going on with her but shes nooot happy at all. Sprayed with spinosad. Top dressed uprising foundation which is a calcium magnesium sulfur and iron amendment. Hoping that may be helpful
Likes
7
Share
@Ambz_1990
Follow
Just approaches week 7, I don't know when to initiate the dragon force, kill feed and then flush, iv gotta buy a camera lens this week to check trichomes but I'm nearing the end
Likes
228
Share
@StarLorr
Follow
Welcome to my Pablø Escøbar diary. In this diary: Seeds: sponsored by Ðivine Șeeds Media: Promix HP Nutrients: Advanced Nutrients, Diablo Nutrients. Light and Weather: Şun☀️and Mother Earth.🌎 ___________________________ Feeding: Mon 03Jun: 2L water not pH'd in bottom saucer only. Tue 04Jun: 2L water not pH'd in bottom saucer only. Wed 05Jun: 4L nutrients pH'd 6.5 Fri 07Jun: 2L water not pH'd in bottom saucer only. Mon 10Jun: 2 L water not pH'd in bottom saucer only. ___________________________ We had very warm weather and by the end of the week rain pouring. Did spray the girls with Safers insecticide after sunset for good measure after discovering spider mites nests on june 3rd. ___________________________ Thanks for stopping by, likes and comments are appreciated!👊🏻😎 Keep on growin! Keep on tokin!!! 😙💨💨💨💨💨
Likes
17
Share
@DBQush
Follow
Dear diary, Week 10 total and week 1 of flower is behind us. Will just be making sure all tops are exposed and somewhat in the right place as I let them stretch for about 21 days before some defoliation. 🌸🌸🌸🌸🌸🌸🌸🌸🌸🌸 ⏰ Day 67: Feeding was given in the evening with a solution of 1.87ms and pH of 5.6. During this feeding, I guided most of the tops into their designated positions within the net, ensuring they are adequately spread out to receive optimal light. I also checked the runoff, which measured 2.3ms, but considering the extra dissolved salts from full draining and collection that would be higher that it really is, I will aim to bring it back to the desired range of 1.65-1.7ms to be sure. ⏰ Day 68: In the evening, the plants were fed with a solution of 1.64ms at a pH of 5.8. ⏰ Day 69: Evening feeding consisted of a solution with 1.66ms strength and a pH of 5.9. I also took the opportunity to confirm that the lights were positioned at a 48cm distance from the canopy. Additionally, I'm testing the exhaust system by venting it outside the room. Currently, the relative humidity (RH) ranges from 53-55% during lights-off and 58-60% during lights-on, while the temperatures remain around 18°C with lights off and 23.5°C with lights on. These conditions fall within the desired vPD (vapor pressure deficit) range of 0.95-1.2. ⏰ Day 70: Feeding was carried out in the evening using a solution with a strength of 1.66ms and a pH of 5.9. To enhance air circulation, I added a fan at the top of the tent. Furthermore, I checked the light intensity, which measured around 760-780ppfd. ⏰ Day 71: During the evening feeding, the plants received a solution with a strength of 1.64ms and a pH of 6.4. The RH levels range from 55-65% as the girls get more bushy, while temperatures vary between 23-18°C, depending on whether the lights are on or off. ⏰ Day 72: Evening feeding included a solution with 1.64ms strength and a pH of 6.4. ⏰ Day 73: The plants were fed with a solution having a strength of 1.66ms and a pH of 6.0. As indicated by the feeding schedule, the A+B mix was increased to 3.5ml/l. I also ensured that the lights were positioned approximately 50cm above the canopy and set to 90% intensity to provide additional heat.
Likes
2
Share
One of the plants grew massive! However the smoke wasn’t the best until a good 4 weeks cure. Very hairy buds too which was interesting 😂 Still a nice smoke
Likes
5
Share
Grow Diary – Week 6, Day 1 of Flowering Boom, today marks Week 6, Day 1 of flower and things are moving along nicely. Buds are stacking and the aromas are straight-up explosive — seriously, it’s getting loud in the tent. PPMs are holding steady around 1000 and I'm dialing in pH to 5.8 every time, no exceptions. The only gripe I’ve got is how dense and crowded the plant has become. I got a bit greedy during training, went for too many shoots packed too close together. Now there’s a ton of foliage and the lower bud sites just aren’t getting the light they need. I’m in there every single day at lights-on, doing leaf tucking and rearranging to get better light penetration to those lower sites and hopefully avoid a bunch of larf. Lesson learned for next round: focus on strong main shoots only, less is more. But with the way things are going, I’m still optimistic I’ll pull at least 7 oz of solid, dank bud. Whatever ends up on the fluffier side will go to canna butter, nothing wasted! Airflow’s solid. Got three fans in action one low, one mid, and one up top keeping everything circulating. Humidity’s on the drier side, which is intentional to help prevent mold, powdery mildew, or pests, especially with how tight the canopy is. Gotta stay ahead of the game. Plant might be a little wild right now but overall we’re on track. Fingers crossed for a strong yield. Let’s go.