A pocas semanas de terminar, lamentablemente algunos de mis frascoa principales de BioBizz perdieron propiedades y eficacia ya que llevaban mucho tiempo guardado. PH muy ácido en el suelo debido a esto. Tuve que regar mucho con agua y cambiar el fertilizante a esta maravilla mineral con pH Perfect (Advanced Nutrients), es esto para no terminar sin peso.

evolucion de la poda apical. durante la semana le aplicare amarres para abrir la planta, a la espera de la malla scrog.

2nd week of flowering and the girls are doing well.

Hubo avance, ganó peso, y tamaño en las flores, un olor muy parecido a lavanda, tuve problemas con la humedad de mi zona (80% HR) se presentó hongo botrytis, tuve que cosechar la cola principal para que no se propague a las demás ramas, la cola principal pesó 34 gr en verde (recién cosechada).

💐🌟HESI contest🌟💐 💮 22.3... 💮 23.3... 💮 24.3... 💮 25.3 the updates are failing due to problems with the quarantine situation, but everything is stabilizing and I can slowly resume with the updates. the plants are growing less, the no hesi plant is smaller and seems to bloom more slowly. I wait for them to start scenting to see if to save some clones: D 💮 26.3 💮 27.3 💮 28.3 ____________________________________________________________________________________ ❕❗❕ Do you already know HESI products? Take a look at the details You will be fully satisfied 😉 👀 https://www.hesi.nl/en/products 📜 A look at the details of what I'm growing 📜 🍓🍌🍇Strawberry Banana Grape by Seedsman🍇🍌🍓 ⚧ Gender ▪️ Feminised ➰ Genes mS 🎄 Genetics ▪️ Strawberry x Grape x Banana OG 🚜Harvest ▪️ 400 - 500 g / m² 🌷Flowering ▪️ 60 - 65 days ✨THC ▪️ 15.0-20.0% ✅CBD ▪️ 1.0% 🏡Room Type ▪️ Indoor 🌄Room Type ▪️ Outdoor 🕋Room Type ▪️ N/D 🎂Release Year ▪️ 2019 __________________________________________________________________________ 📷🥇 Follow the best photos on instagram 🥇📷 https://www.instagram.com/dreamit420/ 🔻🔻Leave a comment with your opinions if you pass by here🔻🔻 🤟🤗💚Thanks and Enjoy growth 💚🤗🤟

11 março - 17 março 12 março - nutrientes misturados em 1l de água 16 março feeding: bio heaven 1.5ml; sílica 0.1ml; bio grow 1ml

Tipped and pruned fan leaves they were huge! Rub smells like candy. Will flower it in a week or so.

These plants got huge. Two of the three were immune to powdery mildew. The third was highly resistant. Saying resistance was strong doesn't do them justice. I included one of the buckets of buds with weight. I had to do that 9 and 10 times depending on plant. Everything went smooth. We missed all the bad weather and got a good dry couple of days to finish harvest. These went a little longer than the 7 weeks. I believe that's because of the suns travel to the south. As it travelled these girls didn't get full sun until after 9:30 a.m. and until 4.20 p.m. They were definitely worth the wait.

Stretch phase is over😁 and the bunch are happy. I gave em a serious defol and lollipop on day 11 of flower. Next week i'm gonna introduce em to Canna Terra Flores🌺 Stay elevated growmies👍

6

no new balls. but some seeds

2nd net is up. Early bud formations are promising. holding up to the extremes pretty well, some leaves taking minor damage, but overall, she is holding up, gave her 1 night at 50F see how she would react, stressful. Not advised as it messes with her metabolism, but I want to see if it triggers any anthocyanin response. Love to see her purp up but no signs yet. Remember, For every molecule of glucose produced during photosynthesis, a plant needs to split six molecules of water. This process provides the hydrogen needed for synthesizing glucose and other organic compounds, while oxygen is released as a byproduct. Homework. If Rubisco activity is impaired and it cannot properly function or regenerate its substrate, the plant's leaves are likely to turn a pale green or lime green, a condition known as chlorosis. Essentially, Rubisco activity is highly regulated and susceptible to various environmental and metabolic factors that can cause it to become inhibited, leading to an apparent failure in RuBP regeneration due to a lack of consumption. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration. RuBisCO is a very large enzyme that constitutes a significant proportion (up to 50%) of leaf soluble protein and requires large investments in nitrogen. Insufficient nitrogen supply limits the plant's ability to produce adequate amounts of RuBisCO, thereby limiting the overall capacity for photosynthesis and carbon fixation. Maintaining the optimal, slightly alkaline pH is crucial for the proper function and regeneration of Rubisco. Deviations in either direction (too high or too low) disrupt the enzyme's structure, activation state, and interaction with its substrates, leading to decreased activity and impaired RuBP regeneration. (Lime/yellowing) Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. For those high-intensity workouts when 1 meal a day is just not enough! Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The plant was getting a little limey yellow in the centre. Shortly thereafter, she was back in business, green mostly regenerated. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems. Confidence is evidence... nothing more. You are confident because you have driven 10,000 times, you are confident because you have spoken 10,000 times. People think confidence is a feeling, but it's not. If you want more confidence, then you need to create evidence, take more shots, collect more data, build more experiences, take more risks; fail, confidence doesn't come first; it is the reward you get for doing the work. no one else wants to do.

Día dos después del cambio a 12/12 En una semana subo avances

Still a few week before harvest. I have stopped adding N as much as possible to my nutrient solution. It might help the bud swell up a little more the last few weeks. Also been adding big bud and bud candy from Advanced Nutrients. I will feed the girls 2 weeks more before going into flush. My soil Sour diesel is ready for flush anytime soon. #1 (back right) have suffered from being to close to the light while also not having enough airflow around it. Have fixed the air problem but cant bring my light any further up. kept around 22 cm from the tallest branch 30< cm from the rest which is the minimum recommended. They smell really pungent and the suger leafs and buds are coted with crystals. My autoflower (front left) is doing good too and i really cant wait to taste it. A good week (kinda)

Day 16: Some branches were tied down already. trying to get her to expand as much as possible. The previous training I did with a Dance World, ended up with a very bushy plant which did not allow a lot of light penetration. Day 18 : They were transplanted in a hempy bucket, I would like to play with it once more. I did not use layers only spike in the super soil. it follows the same recipes as the first transplant in week 2. Day 19 : They were both topped in order to keep 5 branches on each plant, I would like them to spread out as much as possible as they get so bushy. Trying to adjust from the first grow. Day 21 : They were tied down in order to start growing outwards instead of up.

Plantas resistentes a plagas y altas temperaturas, les di poco cuidado y salieron excelentes

Week 6 has brought about the slowing of vertical growth and the flowers starting to put on some bulk. Each time I have run this cut the top leaves will start to come in lighter than the fan leaves below. At week 6, so far they are maintaining a lime green color with some discoloration. This is not a cause for concern. Flower formation is on track and everything else looks healthy. I basically have to ride with whatever happens because I use the BeanStalk line of products for fertilization. They are a single application, controlled release formula that feed the plant over the course of approximately 90 days. This means that I never have to mix nutes. Water only and I set it and forget it. I mix in a known quantity of the product at transplant and that’s it. I highly recommend this product to anyone who is interested in simplifying their grow. The upfront cost is a little steep, but I purchased 3 pound bags of all 4 products in February 2021 and still have a ton of it left. Last time I grew this cut, I observed many of the ‘sugar leaves’ turning yellow and dying prior to harvest. That plant was grown in a 5 gallon pot, with a much longer veg time, much more vegetative mass, and was much closer to my lights. I am hoping to get different results in a smaller pot with shorter veg time and less leaf growth. When I harvested that plant, I noticed that on most flowers this was not a big issue, but over time I have found that when sugar leaves die on the plant, this is the most likely avenue for mold to develop in my room.

Ending week 1 today! I am satisfied with how the girls are growing. Quick summary by days: note: amount of water is on ALL plants, not just 1 13/9 6.5 PH Water Misting (0,2L) 14/9 6.5 PH Water Misting (0,2L) 15/9 6.5 PH Water Misting (0,3L) 16/9 Since I didn't water my soil when I was planting the seeds, I grabbed some more soil, put it on top just to help with stretching, and then I decided to do a full watering just to get the soil wet. I grabbed my pressure pump, put in 1,5L of 6.5PH water, voodoo juice + piranha 2ml/L and watered all 9 of them with 1.5L (misting with the pressure pump - I think I will continue to do the waterings like this because it's so easy!) 17/9 6.5 PH Water Misting (0,2L) I've seen a fungus gnat, so I put up more yellow sticky traps. 18/9 6.5 PH Water Misting (0,2L) 19/9 6.5 PH Water Misting (0,2L) Caught 4 fungus gnats for now, I hope the bastards didn't lay their eggs. Keeping the vents on. Temperature this weeks was 24-27, moisture 50-70, average 60. Mimosa #2 a bit yellowish, keeping an eye on her, hope it's nothing serious. Everything else is fine, going into week 2! I still won't give them any NPK, just voodoo + piranha + b52 in week 2. Maybe i put carboload or bud candy just to feed the bacteria and the fungus in piranha and voodoo juice, any thoughts on that? I think I will introduce Micro+Grow+Bloom 0,5ml/L in the third week. Also, there are some white spots on the leaves. I think it could be chlorine? Im watering with tap water, letting it sit for around 12 hours before adjusting PH and watering. Maybe I will let it sit for more this week. See ya in 7 days, if there aren't any more problems meantime haha