Likes
Comments
Share
@Mimi420
Follow
Day 56 Flower — final update before chop. This’ll be the last live update for this run — I’m planning to cut next week and will drop a proper harvest post once everything’s dry and weighed. Gotta say I’m stoked: buds are looking sick, smells are off the charts and after 8 years I can’t wait to finally burn my own harvest. Quick real-talk: biggest headache this run was the night humidity (box was sitting in a wet cold garage — nights were brutal). I ordered the Spider Farmer heater ages ago expecting it to sort that, but shipping got messed up and it never showed on time. If I didn’t already have their inline fan and controller I probably would’ve cancelled and gone another route. Still — despite the rough nights the plants pulled through and the colors/terps turned out gorgeous. Lights/Setup note (what I saw): LED for veg worked great — compact, short internodes, dense canopy. HPS gave the flower its extra stretch and way denser colas — difference was obvious in top size and nug density. Next round I’ll run veg under LED and flip flower to HPS for that chunky, heavy bud structure. General impressions & vibes: Resin city. Most tops are sticky and frosty as hell — touch a cola and your fingers get that gooey, sweet grime immediately. Colours are stunning: purples, bronzes and deep greens — especially on the kush phenos. Cold nights helped bring that out even though they stressed the tent a bit. Canopy filled nicely — lots of even colas across the screen. Smell is absolutely lovely: sweet, cake-y, kushy funk depending on the corner. Strain-by-strain notes (photos + what I noticed) Wedding Cake Portland — sweetest, creamiest nose. Tops are tight and resinous with nice amber pistils coming through. Made some of the chunkiest, most fragrant flowers in the tent. Beautiful frost. Kush Crasher — most frosty of the bunch. Leaves and buds look like they were powdered with sugar. Strong kush terp profile, darker leaves. Real eye-catcher. AK-47 — classic structure, reliable resin and nice citrus/earthy notes. Good mid-bud density, chunky and fragrant. Very consistent. Double Krush — leaner colas but loaded with crystals. Has that layered aroma profile — kush backbone with sweet overtones. Looks like it’ll smoke quite smooth. Wappa — star of the show for me. Fat main colas, gorgeous purple bronzing and a sticky, punchy aroma. Dense, hard buds that scream quality. If there’s a top-shelf winner in this round, it’s Wappa — chunky, potent and beautiful. Big shout: Wappa brought the goods. Detroit Runtz — sweet and fruity, bag appeal for days. Colas are a touch lighter but super sparkly and smelly, classic runtz vibes. Run summary / final thoughts I made mistakes (low nights + humidity were a pain), but overall the plants handled it — produced crazy-looking, fragrant, sticky flowers. I flushed with plain water the last week and let the plants finish their thing. Next run I’ll tweak light strategy (veg LED, flower HPS) and sort the heat/humidity earlier so I’m not battling the box at critical weeks. Big ups to the girls — they pulled through and rewarded me with proper frosty buds. Also big frowny face to Spider Farmer for the late heater delivery — if you’re reading this, sort the logistics — shipping delays hurt growers (I’d been waiting since mid-November). If you want to make it right, you know where to DM. Closing lines for Wappa: Wappa was my pride this run — chunky as hell, super sticky, colors that pop and a terp punch that’ll make heads turn. Proper show-stealer. Can’t wait to chop and see what she smokes like. Harvest next week — will post dry weights and final pics. Stay tuned. ✌️🍃🔥
Likes
Comments
Share
Likes
56
Share
@Aedaone
Follow
The temperatures, humidity, height, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil to be spread evenly on top of the soil. The plants are getting just under 13.5 hours of light now. In grow conditions half hours aren't an option, so I'm noting here. Day 1 we had a high temperature of 91°F. Skies were partly cloudy. I watered about 5 gallons per pot. I treated with Growers Ally fungicide. Day 2 we had a high temperature of 94°F. The girls were thirsty. I watered about 6 gallons per pot. I really wet them and the ground under the pots. They're feeding on the runoff in the soil as they've rooted through the pots. Day 3 we had a high temperature of 94°. It felt like 102°F. Skies were sunny and clear. I watered about 5 gallons per pot twice today. The girls were super thirsty. I added 80ml Coop Poop and 45ml Soluble Kelp Meal. Day 4 we had a high temperature of 90°F. Skies were partly cloudy. I watered about 5 gallons each pot. Day 5 the high was 94°F with mostly clear skies. I watered about 5 gallons per pot. Then I watered in the evening about 3 gallons per pot. These girls are eating now. Day 6 we had a high temperature of 89°F. Skies were mostly cloudy to overcast. We had a lot of rain today so no need to water Day 7 we had a high temperature of 78°F. Skies were overcast with all day rain and mist. It's about as bad of weather as u can get for cannabis in flower. Let's see how these fastbuds hold up to 💯 fu weather. Overall the week was a success. The canopy is a little out of hand but these girls are stacking frosty buds. The powdery mildew has been put in check by the Growers Ally fungicide. I'll continue to use that especially after day 7's fu weather.
Likes
15
Share
@Messypies
Follow
04/07/2020 - 1st day of germination. All 4 have sank to bottom of glass. Now currently in paper towels in a warm dark area. 07/07/2020 - only 3 seeds germinated correctly . Planted, they have now sprouted and are looking good
Likes
3
Share
@CalGonJim
Follow
4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3. 4/16 543am 5ft tent sideways attached to 6ft table that can slide around
Likes
4
Share
@SamDo
Follow
Vegetative Week 6 – Pineapple Upside Down (Round 2) This week confirms a full recovery in vegetative growth. The plant clearly regained vigor and momentum. Growth is strong, foliage is dense, and overall structure looks healthy. Internodal spacing is noticeably tight, resulting in a very compact and bushy plant. This could be influenced by the full-spectrum lighting, which appears to promote dense vegetative development. Although topping or defoliation was considered, no structural work was done this week. The priority is to let the plant continue growing naturally and fully stabilize before any training or shaping. Nutrition remains unchanged from the previous week. The nutrient solution is maintained around EC 1.4–1.5, with pH close to 6.0. The plant is responding well, showing no signs of deficiency or stress. While some time was lost earlier in the cycle due to initial issues, the delay is clearly less significant than in the previous run. Progress has improved, and this recovery phase highlights areas to refine in future germination and early-stage management. This week ends on a positive note. The plant looks healthy again, and the focus moving forward is simply to let her grow and maintain consistency. See you next week. Take care. -Update: 04/02/26- •Structural work update: Today, a full structural intervention was carried out on the plant. Defoliation, topping, and pruning were all done in one session. The plant had become too bushy and overly dense, with poor airflow and excessive humidity trapped inside the canopy. To correct this, the structure was reset: four lateral branches were selected and kept, while the main apexes were topped to start defining the future shape of the plant. At this stage, the goal was not refinement but foundation. This intervention marks the beginning of the plant’s final structure, or at least the first clear step toward it. A significant amount of foliage was removed, leaving the plant with much less leaf mass than before. The work is now finished, and no further cutting is planned for the moment. From here, the plant will simply be left to recover from the stress of this heavy intervention. The focus now shifts to recovery, stability, and healthy regrowth.
Likes
83
Share
@RunWithIt
Follow
What a fun experience! This was my first time trying a mixed grow style of synthetics and organic. I think I may have found my new go-to strategy. This definitely wasn't a perfect run by any means - as a matter of fact, I botched the feedings earlier in her life. However this grow definitely taught me a lot more about how to treat this strain properly. Now I'm running her clones in the 3x3x6. So the legacy will continue! Let's see how this strain does during the summer months! Cheers everyone! This has been an awesome grow. What I'm lacking in yield, I yet again make up for in quality. And I don't think yield will be an issue with the clones, they're week 6 veg - and quite massive! - RWI out!! 😁 😶‍🌫️🤑
Likes
21
Share
Hello everybody!🙏🏿🌸 the girls recovered well after the topping , with no grow stops and feeling pretty good! ( 2 of them even got 4 new main stems ) Looking forward for the first trimming and flower phase. Moisture is pretty high, I noticed water forming under some pressed leaves. -They getting 1,25,l 2x per week - The roots start to grow out at the bottom of the pot Fan running on full power and they hearing classic music most of the time Day 20 -each Lady got 1,25l - pulled the baby leaves at the bottom -replaced them in the tent - placed van on a higher point " Cant wait for start of next week and flower phase🌸🙏🏿" Day 21 - noticed water on the side of the tent - leaves got greener after watering - some leaves got little burns on the edges so i adjusted the light
Likes
6
Share
The Bruce Banner girls had a strong week! 💪 #1 is still the biggest plant in the tent and looks super happy. She handled the LST perfectly and keeps stretching nicely 🔥. #2 is catching up and growing more balanced now. #3 has finally found her rhythm and started growing normally 🙌. Both #2 and #3 are now showing their first pistils, so they’ve officially entered the flowering stage 🌸. This week all three received a watering with Green House Bio Enhancer, and aside from that, just RO water + CalMag (Advanced Nutrients) 💧. No issues or signs of deficiency, leaves are lush green and healthy across the board 🌿. They’re growing in the 90×90 tent with the AC Infinity AI setup and Spider Farmer SE5000, keeping everything dialed in: 25–26 °C, 60 % RH, and around 500–600 µmol/m²/s PPFD 🌡️. Overall, #1 remains the queen of the tent 👑, while #2 and #3 are catching up as they ease into early flower. Excited to see them start stacking buds soon! ✨
Likes
107
Share
💩Holy Crap Growmies We Are Back💩 Code Name FBT2309 Well growmies we are at 14 days in and everything is going great 👌 👉 Started to do some low stress training👈 We all ready got , some Pre-flower showing already 👌 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Likes
6
Share
@rvabudman
Follow
Started my first round of topping this week. The Gold Leaf is looking healthy.
Likes
8
Share
@RakonGrow
Follow
+ data online : rakongrow.lima.zone/growme-godfeather-og-f1-auto-017.html +
Likes
22
Share
Pretty boring week its almost like the plants stall at this stage and its always super boring waiting for them to take off. Plants adjusted well to the bigger room and new lights.. umol jacked up to 800
Likes
10
Share
@UGrowGuy
Follow
01/11 True week one of flower. These girls don’t like being fed full strength nutes. They definitely stretch a lil more directly under the HPS. The other girls getting more MH light def don't have the same stretch. I will be switching out the MH for a HPS and adding a LED in the next couple days. 01/12 Changed the MH with the HPS. both lights kicking at 1150w with the UVB’s. With the plants over 5’ tall its not enough light. There is soo much photosynthetic surface area + i have not defoliated one leaf the entire grow. I will remove the all of the growth about 2’ up on each plant this weekend.
Likes
8
Share
02/23 (M) (Pre-Flower) flipped mother into flower last week - flushed with clean water for 2 days then began giving flower nutes in small doses for now - still feeding off the drip lines seems to be working as planned. Feeds will become more often (once/twice a day - 1 min feeds. 02/23 (C) - 7 of the 15 clones have rooted successfully with thick multi strands in each clone - Green color starting to come back as well - Have begun applying nute feeds to help recovery - Will give the other 8 sometime to begin rooting but if nothing happens in the next week then I will keep the 7 rooting now and cull the other 8. 02/27 (M) (Pre-Flower) Mother currently in PRE-FLOWER and growing accordingly - Her feeds have been consistent (Once a day - altered between nutes and clean water) 02/27 (C) - Removed the 7 sicker clones and only kept 8 - Thus far they are running with 0 issues - High temps and High humidity seems to have increased veg and rooting production. Nodes are developing faster then normal will continue to monitor for any changes.
Likes
2
Share
We love the testing of these American strains, i can just recommend the 2 FAST 4 BUD'S Genetics, the auto Strains haven't for the price and the quantity the other's seedbank in test behind and they stay on first place together with sweetseeds, but like i say , testing isn't finish jet
Likes
37
Share
Cut out the nitrogen this week, they received two feedings this week of only micro, bloom, and big bud! These girls are super healthy and absolutely loving life! Very large plants! Looking like they will be an xl harvest! Check out my other grow. Blue dream matic!
Likes
5
Share
Transplanted into the 3 gallon medical buckets from thebucketcompany. Everything still going smoothly. Plants are happy under the gavita at 40% power and 50 inches above the top of the plants.