Sundae Driver Pheno cut

Hab sie jetzt umgetopft und ein paar Tage vorher schon die zwei unteren Triebe entfernt. Jetzt bleiben mir nur noch etwa 30 cm bis zur Lampe, also muss ich bald wieder anfangen, sie runterzubinden. Nächste Woche wird dann auch nochmal getoppt. Erstmal lass ich sie aber in Ruhe, damit sie sich an den neuen Topf gewöhnen kann. Und natürlich hab ich letzte Nacht das Fenster offen gelassen… jetzt ist sie ein bisschen angepisst. 😅 Aber ich denke, sie fängt sich schon wieder.

Waw, what a contrast to last week. Full of trichomes with an amazing aroma given off. I am expecting great changes in the next few weeks. Excellent so far!

Última semana que dudo que llegue a ser completa de crecimiento. Las voy a pasar en breves a 12/12. Algún arrugamiento de las hojas estamos sufriendo, regare con agua antes de pasar a floracion. Que sigan creciendo. 23/02/2021 Actualizo Se pasan ya hoy mismo a 12/12 no quiero que se me desmadre el armario. Empieza lo bueno

HELP!!! Took these with a macro lens!! I DONT KNOW WHAT KIND BUG THIS IS!!! WHAT ARE THEY AND WHAT DO I DO!?!? SOMEONE HELP!!! ❤️

Will post dry weights & more comments soon! Sorry for the lack of updates but Thanks for following & happy growing friends!✌️🏼🙏🏼🌱

A sad week, I found bud rot and had to take my plants out and do a big check and remove all dense underdeveloped growth. It will be a pretty big hit on the yield I guess but the most important thing is learning and that I did. The bud rot could spread due to my RH being 65/70 at nights and it used to be +80 before, + bad airflow. I got new fans in the tent and my dehumidifier was ordered already but its not in yet. On the other side, the plants are looking pretty damn good, they smell amazing and 3 of the 4 plants is getting a very dense nug structure.

Week 7

Empezamos otra semana de vegetación y la pequeña banana 🍌 ya se va haciendo mayor 😃 Las hojas estan creciendo grandes y sanas mientras que el tallo se esta poniendo gordo y fuerte 💪😉 Camos a seguir con los nutrienes de canna que le estan llendo muy bien 👍

Her aroma is awesome, I'm starting to love her a lot, very terpy man, sweet dank aroma, this lady has been grown 100% organically with only biotabs organics dry amendments, I have prepared her soil with bio tabs slow release fertilizer, startrex, mycotrex and bactrex. Loving the Fragrance of the buds guys! Very recomended cbd autoflower strain

The flush continues, straight tap water. Plant od looking great! Took off some tester buds and drying them. The CM is taking a few weeks longer in flower, looks like it will be another week. I am not surprised at all, this one was on the outside edge of lights. All in all it is doing very good under the circumstances. Freed up some room and now moved it directly under the lights for it's last week or so. Thanks for looking

Really sublime strain released the day of the harvest. Casually, means a lot for me… is still not test #2 but Sticky Broccoli. What e Epic Name. Please notice the long shape i’m a tall guy and take a look to me next this baby. There are loves that are destined to be brief but intense and loves that are destined to last forever. Sticky Broccoli is one of those things I have done that I will hardly forget in my life, when I am old and have superpowers for all the THC smoked, I will tell the story of these monsters. ATTENTION: I have divided the harvests of the two plants because they are widely documented by many photos so as to give you greater possibility of distinction. The other plant is entirely published in the week before the harvest. They were born in the ideal period, I told my boss also favored by the moon, in an ideal super tropical place comparable to California in terms of climate, they ate Plagron the best that the market can offer in terms of organic fertilization and they grew in a newly bought organic soil that was not recycled. The conditions were really all there but we still went beyond all expectations. From the first moment they stood out for being the fastest, voracious with a metabolism at full blast always thanks to the Plagron additives and these impressive genetics. We remember the excellent parents Sticky beast and Green Crack as heritage I would say not bad at all. I let them vegetate a bit too much or rather 4/5 weeks are not that much but while the others have remained almost normal plants these have broken through. I say broken through because the main cola of the tallest was pushing decisively on the roof of the 220 cm growbox. Truly animalistic the few friends who saw it have widened their eyes. A Wonder or rather two. The main cola is standing by miracle but it is very big and very full of very very resinous grass. This harvest of 23 plants all Zamnesia has proved surprising from many aspects, an exaggerated quantity of grass, autoflowering that have touched 100 grams and all above 50 always very little mold and probably because I too much hold of some paints. But the thing that literally amazed me, because unfortunately these days we have to be amazed by this too, ZERO HERMAPHRODITES. Let's think carefully about what we do guys when we plant, we never put seeds found in the grass and we plant seeds from breeders who work well. Zamnesia is distinguishing itself guys I'm here and I'll prove it to you if you have any questions or doubts please write to me for anything. Released to the public today 23/12/2024 remember this name: Sticky Broccoli, there is also an auto version like almost all Zamnesia strains and I promise you that it will become a masterpiece soon. Everyone will want a seed, I don't like to do Nostradamus, I recognize quality. Zamnesia Strain Description // Our breeders love to challenge themselves to develop cutting-edge varieties and Sticky Broccoli is a perfect example of their mastery. Combining high-yielding genetics like Sticky Beast with pungent Green Crack has resulted in a 90% indica strain that is extremely tasty and has 23% THC. Inside the grow room, the plants perform excellently. Growers will appreciate the high yields and the extraordinary beauty of the buds: fragrant, vibrant and glistening with resin. Smokers will be enchanted by the seductive aromas and intense effects that emerge almost instantly after the first toke. - Get a seed of this fantastic strain --- https://www.zamnesia.io/it/10818-zamnesia-seeds-sticky-broccoli.html The plant has eaten the 100% Organic feeding of Plagron: Alga Grow and Alga Bloom as basic nutrients, the rooting Power Roots, the amino acids of Sugar Royal, the Enzymes of Pure Zym that eat the dead parts in the soil, Power Buds that always gives us immense satisfaction with rapidity of start of flowering and composition of the buds, the legendary Green Sensation that now needs no introduction, a name a guarantee. The fertilizer kits that you can find on the Zamnesia website are perfect for this purpose, there is everything. Choose them based on their mineral/organic composition and the soil you have chosen. at the link --- https://www.zamnesia.io/it/11457-plagron-easy-pack-natural.html The quantity was measured using the sheet prepared on purpose on the Plagron website based on the soil chosen: Plagron Pro Mix + Perlite. at the link --- https://plagron.com/en Secret Jardin DF16 ventilation system and all the fans too make wind into at the link --- https://www.secretjardin.com/it/ The light was supplied by MarshHydro and the growbox too at the link --- https://www.mars-hydro.com A fantastic selection of seeds, a headshop and a selection of exceptional accessories on the world of cannabis, many other things about mushrooms, health, well-being and all the beautiful things that nature offers only on the Zamnesia website at the link --- https://www.zamnesia.com

ve repotted into her final 15l auto pot. The procedure I used is as follows. Items needed.. Clay pebbles Hydro coco 60/40 clay pebbles/Coco. Silicium Flash Startrex Mycrotrex Bactrex And of course Bio tablets X2. 15l of hydro coco was mixed with 25g of Silicium Flash and 25g of Startrex. Mixed up well to form the main substrate. I filled the autopots to a depth of 5cm with clay pebbles and then layered up the amended substrate making a nice hole for my 300ml nursery pots. Into this hole I sprinkled in 5g of Mycrotrex and then dropped the seedling in. This then gets 2 biotabs pushed 5-8cm into the substrate and 1l of water mixed with 5ml of Bactrex I need to top feed the autopots for a couple of weeks so the root system can establish before I transfer to my flower room and the gravity feeding trays..🤘🏼👍🏼 I'm keeping temps at a constant 25c and lights are on 24hrs a day. Rh is sitting around 65%.it too low hence the domes but then it goes too high. I'm going to run a couple of days with the 65% but vpd over 1 is a bit high for so early.. we shall see. The sweet seeds all seem very strong and I'm really liking how fast these are growing in this substrate. I just need to work out the watering correctly.. 🤞🏼🤞🏼🤞🏼 .

Pure Ice cream is finishing up. I switched her to just ph water yesterday. The next update will be a harvest for her. She has a nice cream smell, and Looks really good. She should produce some nice nuggets. Thank you Pure Instinto Seeds, Athena, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer Official Website Links: US&Worldwide: https://www.spider-farmer.com CA: https://spiderfarmer.ca UK: https://spiderfarmer.co.uk EU: https://spiderfarmer.eu AU: https://spiderfarmer.com.au G5000 Light Amazon Link: amzn.to/4643esa UVR 40: https://www.amazon.com/dp/B0BR7SGTHS Discount code: saveurcash (Stackable)

Big healthy plant for the most part, but the flowering just won’t kick in! This is the week that says she’s running behind or that she’s going to be on a cocaine diet till the end? Need some bulk, it’s week 8 already. I don’t like my girls fast anyways, so I’ll be a patient gent. Day 51: Early AM: It seems that the flowers are starting to fatten up at a familiar rate now. Stretch is definitely over to boot. Feels like a week or so behind my other Auto grows, but I am gathering from the peeps on GD that grow times can be all over the place with Autos; even with seeds front the same plant. I won't be a Debbie-downer, but I cant help but think what this thing would have done in a bigger space. I left her alone a couple days ago as her stretch slowed noticeably. A pluck here and there moving forward, but that's about it for the sadistic stuff. Day 51: Late Afternoon: She's about to take off in the flower it feels. 6 hours passed, and I was like "oh, hello there!" If nothing goes too crazy, I'm hoping she'll be a good one regardless of her 3.8 sf living quarters. I never did move the top shelf, so the light is less than 8 inches from the canopy. I'll keep an eye on the "crispy effect" out of complete laziness and fear of dropping the light on the plant! Tallest branches are around the perimeter and still hitting their DLI. The center/down the plant is getting blasted by the light, so I suspect about 6 or so runners to hit the canopy and hang out with the FIM family in the next week or so? Day 51: Evening: Bigger bucket = bigger plant in hydro? One heck of a root mass going on in her trough. I tried pushing the roots to the back of the bucket so I could ph without getting roots directly. Nope! That bucket is filled with roots, and its an 8 gallon bucket. I would have never thought an auto would have enough time to grow into an 8 gallon bucket. I was banking on some extra nutrient volume, so I could go out of town for 4-5 days. Hard to say on bucket size though, I have grown 10 foot tomato monsters in 3 gallon Ebb/Flow pots so maybe she would have grown the same in a 5 gallon bucket? I don't think that much root volume could grown in an 5 gallon bucket, so bigger bucket = bigger plant here? Things that make you go "hmmm..." Day 53: A lot of undesirable undergrowth that blew up during stretch. Like a ton of it, but I’m done messing with her. Took out the top shelf and reconfigured exhaust. What a pain. I didn’t drop the light but the IP cam took a nose dive on a branch. Now the light is about 12-14” from canary instead of 6-8'. She started to get some light burn so I had to do the deed. Wider IP camera view with added distance so that's a plus! Plant is very happy at 550-575ppm. 600ppm seems to be the number without burning plants? Humidity, temp, and ppm AND light distance in check. Raising the light opened the focal point of this light quite a bit; especially in the center where the PPFD was over 2500 at the center and light less than 8 inches from the canopy. Feeling good. All is in check with some room to grow. She will gain another 2" in height I presume through flower. Day 54: The jury is out of this light. I hits my dli from veg to harvest with it's fixed position design, but wondering if 50watts more would have been the number. I'm going to keep the light in there to keep the data flow congruent to its original design. I hit my DLI right now from the top of the canopy to about 10-12" down the plant. Lighter specs from my last grow, but its hard to tell what is getting what once you leave top of the canopy. Hopefully it will suffice! I moved the light a few inches closer as my DLI was getting light in some of the corners/perimeter. She right 10-11" and is about as good as she is going to get given150watts. I am realizing that 200 watt is probably the optimized wattage here if some canopy penetration is desired, but light these dimensions are not plentiful[. 250 watt and that would be max with managing heat and exhaust sound levels. 250 watt would accommodate a fix state design no problem. I hate to change the light variable but I only have the luxury of one-at-a-time grows, so everything counts on some levels. Been using the PAR meter on and off throughout the day. Penetration needs to be about 25% stronger. Its a perfect light for your average auto grow, but if these results repeat themselves a 250 watt is probably in order. I am making the executive decision to install a 250 watt bar light. I found one with a small footprint at 240watts. Hard find, specs are more than adequate for 4 sf. Will maybe get down a bit deeper but things are looking really crammed with the bottom half. It is PACKED with bud sites and likely not enough light. Questioning the light change, but will definitly thin some lower stuff and "officially" let her be. Since in bumped up the CalMag to about 1.5 ml/gal the reservoir has been running ph equilibrium for 6 days now at 600ppm. I’m guessing this deficiency was driving down ph instead of the usual up/equilibrium in week 7. My first auto to eat at 600ppm for a week with no tip burn. She looks fit, I’ll keep her diet here as the max. I have never cut MicroGro out completely in a grow before. I have been faithful to GH 7 part series since for long time. This grow I took the GH feeding chart and worked backwards to a ppm level I found on the web to be an acceptable range for Autos. These ratios have traditionally been acceptable and without issue. Beautiful plants every time. On the last two runs with this concocted feeding schedule Cal/Magic was very light until week 7, and exactly when I started to see rust spots, etc. in this grow. After a 2ml/gal dose of CaliMagic plus addbacks on watering, that issue disappeared overnight. I mean zero issues with any new or progressing growth. Here's the take away with this. Although CalMag issues are easy to spot and resolve, I did learn is that in both runs they HAD A PERSISTANT DROP IN PH IN MY RESERVOIR in late veg/tranistion. Another wards, if you PH is dropping and your ppm are not doing anything, it very well could be a CalMag deficiency. An indication know before the leaves start getting spotted, etc. I guess if one were perceptive enough, you could resolve this issue as it happens, and never see the effect on the leaves? On this current run, as soon as I dosed the bucket good with Cal/Mag and kept my add/backs a 1.5/ml/gal the PH locked in big. Going on 7 days at 600ppm, 6.0 and the ph is steadily rising. Maybe another bump in ppm. No sign of tip burn yet, why the heck not!:) Not really the expected progress this week but she may just need time. I don’t think she’ll really bulk up until the end of week 9 / week 10. New light to arrive Tuesday but not sure a stronger light will get much further down. It’s almost a roadblock to get beyond the main tops and they are getting well more than they can handle light wise. Bigger light may only mean more heat.

Ready to harvest soon! Those colors are amazing! Never seen that in this color

RQS Titan F1 week 5 Hello friends and followers, 2/25 This has been an exciting week. My Titan girls started flower 🌼. T3 in the 3-gallon air pot is larger at 6.5 inches. Last week I noticed her new growth was getting long and thin. A sure sign the pistils will emerge in a day or two. T3 started flower 🌼on 2/25. 2/26 Surprise surprise, T3 stretched an inch overnight and T2 about a.5 inch. That stretch meant I had a busy plant workday ahead. First, I defoliated T3 since I could see what I had to work with. Then because I’ve been following @yan402 on his Titan grow, I said I was going to top her. He said its ok if done correctly and at the right time. Well, fingers crossed 🤞, I hope it was not too late or cut in yhe wrong place since T3 was already in flower. Her short (.75-1” long) stems are so close to the stem, it was difficult getting the tie down pins placed. With T2’s stretches her tippy top is just peeking above the copper pot rim. She is towering 😅 at 2.5 inches. T2 was defoliated on 2/26 as well. Her defoliation pictures above show how many I was able to trim off 7 and the leaf relative size. T2’s largest leaf is the size of a quarter and the smallest set I cut off, about the size of a penny. I keep supplementing and folar spraying with Cal-mag but the internodal chlorosis is still visible. I think Teapot gal (T2) has a copper excess.  Slowed Growth,  Fewer branches  Internodal Chlorosis  Stumpy roots (I won’t see this until I harvest and reveal the root ball) Given these symptoms of copper excess, and that RQS Titan are F1 hybrids and should be stable, I believe the height and the health differences are attributable to the copper wire teapot. They are in the same soil, same tent environment, same nutrient solution, same light, same everything. As I stated in previous discourse, I expected the overall plant to be smaller than T3 simply based on the pot size but did not expect to see such size differences so early, not to mention the nutrient issues. How I wonder? The copper wire is separated from the plant and soil by coco liner (which should be neutral, then coffee filters because I thought the soil would was out). Then the soil and plant. T2 is towering at 2.5 inches and started flower on 2/29. I expected a delay in her flowering time (4 days after T3) since she was transplanted to the teapot when T1 failed to thrive (maybe also the teapot cause?). Any time you train your plants, the stress causes delays in flowering then harvest. I defoliated T2 on 3/1 day 30. The pictures after defoliation show the tight node structure with 3 or 4 nodes crammed in only 1.5 inches of the main stem. Sheesh. So, as we enter March, we are off and growing buds. RQS says harvest 70-75 days or 40-45 days of flower. My calculations – harvest will be April 13-18. Be sure to come for my tea

Gracias al equipo de MSNL Seeds, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁RS11: RS11 es uno de nuestros nuevos híbridos 50/50 perfectamente equilibrados. Creamos RS11 cruzando Pink Guava x OZK x Sunset Sherbet con la intención de crear una variedad que ofrezca medidas iguales de efectos edificantes y relajantes. Aclamada como una de las variedades más sabrosas del mercado, su sabor agrio y dulce a bayas viene con un potente rango de THC del 27% al 31%. 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 📆 Semana 9: El engorde de los cogollos está prácticamente terminado y solo falta que maduren un poco antes de ser cosechada. Gran trabajo por parte de mis colaboradores, estoy bastante contento con este grow, el próximo tendré más atención en la etapa de crecimiento, la cual es muy importante si quiero obtener una cosecha de calidad. A partir de ahora agua hasta el fin.