Time to put them in there new home, I'm using around 45l of living soil per pot.

Some good defoliation down low. And, a whole lot of scrogging this week. Not much to report. Time to sit and wait for the magic to happen now.

Final week here. Another really good run. Gonna chop around day 73.

pretty happy with it, nice yield, one plant was perfectly fine and one was a little rough near the end, one plants nugs were very dense the other plants was a bit on the fluffier side. Nice strain but a great rosin producer..

Despite of wet, bad, cold/nasty weather...Beelzebub s flowers are getting more demonic everyday!👹👌 @-}}-}}} Happy growing 4 all✊ **KISS! growingtechnique: keepItSimple, Stupid!

Última semana de floración de estas candy caramelo y es que vaya flores son como rocas muy compactas kio, de lo mejor que e visto también en mucho tiempo fumetillas. Plantas pequeñas con un buen porte y un buen grosor de tallo, son bastante rápidas a la hora de florecer, os aseguro que las aguantaba una semana más pero por temas de virus y tal decido cortarlas ya que también están bien bastante contento en verdad con esta varieddd. Mantuve ph hasta el final controlando humedad y temperatura pocas veces desvarío el asunto. Muy muy contento zambeza hizo un fast bastante curiosa con olores dulces .

On the first day of week 4 I did FIM on the plant at 6 node. Not sure if I overdid it and accidentally top her instead of FIM but we will see how it progresses Up to this point the plant has been growing very strong and healthy almost as fast as Autos I have grow before. Day 22 the plant doesn't seem stressed out at all and in fact is pumping New Growth right away I thought it was going to be sad for a day or two but no way the genetics are very strong the plant is very vigorous . Day 24 I did some minor defoliation to allow the light to penetrate everywhere in the plant. Also looks like the fim was a failed and end up topping instead I will continue to update thank you for reading and have a happy grow.

Just keeping on the same routine watered roughly 4 L 2 of 3 days

Even though the temperatures have gone extremely to high for my liking this plant seems to love it. She’s a very resilient plant I highly recommend tho she strain to everyone. After I clear out my flowering tent I will put this bad baby into flower.

Hi, topman!! 10 days have passed since the last report, and during this time the plants have grown and We have bent them down to prepare for SCROG. Defoliation was also carried out 7 days ago, which we will do again before the transfer on 12/12. Added delta 9 from CBG - the best thing to add at the vegetative stage!!

Welcome to week 10! First Time checking trichomes this week but were still far off (~3-4 weeks+). Deficencies are officially under control, theyre not getting any worse by now. Ramped up nutes, next watering will also be 4ml/l of bloom instead of 3. They really started to swell and build mass by now. Despite all the issues in the beginning, im happy with how they look now and i learnt a lot. well, i say lot, mainly just "dont overwater" lol. Didnt defoliate, just watering and checking on them. They smell really good and kinda strong, not overwhelming yet but im 1 inch away from giving them the "strong" here on growdiaries. Timelapse again at the end of the week.

Ultima semana. Empiezo el flush. Reduzco horas de luz y potencia progresivamente.

It is already the fifth week of vegetation and they are incredible, the autoflowering ones above all are beautiful and it is also noticing how the critical x are growing little by little. ! (Any questions, or any advice you can give me leave it in the comments, I also speak Spanish)

This plant has had a sudden burst of growth. She is now the tallest in the tent. The buds are now a decent size and the smell is very nice. Still on full feed and no issues to report.

Gut Gut gut

I did her first water change on day 10 upped the nutrient dose and increased the reservior to 12 gallons. Gave her the first dose of armor si and humic acid. I topped her on day 12 to start 4 main branches. Will most likely top again and start training in about a week depending on how she wants to grow. The goal is a maximum of 5 weeks veg if they cooperate. Of the 6 strains she is a little faster than the rest so far. They are under 240w qb and a galaxyhydro pulling about 140w for now. Will be adding more qb when I spread the buckets out.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 REMO NUTRIENTS 👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

So I am halfway through my first harvest and I'm starting to feel like I may have been impatient! Would appreciate any advice or constructive criticism from any experienced growers out there! Do you think I harvest the rest of my plant now or leave it a while? Any tips/hints on the best way to maximize bud density? Thanks in advance

Combined the cop of water and paper towel method then planted the sprouts in root root cubes