08.07.2023 Tag 64 an #1 hab ich leichten Magnesiummangel festgestellt, es gab heute beim Gießen eine kleine extra Dosis CalMag und ein Blattspray mit Epsom Salz - ansonsten entwickeln sich beide hervorragend - ich habe 2 Secret Jardin Cossmorrow 20W Bloom mit ins Zelt gehangen, um die langen Budsites zu bedienen - das bringt ganz schön Temperatur ins Zelt Alles in Allem bin ich sehr zufrieden bisher -> vor allem mit der Entlaubung. Das sieht jetzt richtig gut aus.

Bewässerung: 30000 ml jeden 3 Tag in der ein und zwanzigste Woche pH-Wert: 6,3 EC-Wert: 1,6 mS/cm Temperatur: 24ºC Luftfeuchtigkeit: 60% Schädlingsbekämpfung: / Düngemittel: Sie bekommen ab jetzt Brenneseljauche da sie im Outdoor Bereich ist. Besonderheiten: Der Boden um den still herum wurde mit Holzasche behandelt gegen Meltau. -Tag 136 die Membrana sieht sehr gut aus nach der Entlaubung und wir denken dass der stretch auch vorbei ist, die oberen Colas sehe heute dicker aus 😜 -Tag 137 Heute haben wir sie gegossen mit ca. 30l Wasser und 3l Brenneseljauche 😎 -Tag 141 Unsere Monster sieht gut aus, hat aber ein paar Probleme. Einige Blüten sind von Pilzbefall betroffen, deshalb schneiden wir sie ab. Außerdem haben wir an den Spitzen rote Spinnmilben gefunden. Noch sind es nicht allzu viele, aber sicherheitshalber schlagen wir mit Phytoseilus Persimilis zurück. Die einzige, die das Recht hat, die Membran zu fressen, ist die Raupe, die sich bereits daran erfreut. Ansonsten haben wir sie heute wieder mit Jauche gegossen, diesmal auch mit Schachtelhalm 😌

Total Days: 70 Flower: 31 Vege growth is stopped or very slow at this point. Might eke out another inch or two. I'll raise the lights as far as they can go soon (only 3-4" for the 650w light on right), but with the higher operating RH%, I've yet to see any pistil burn. The light cycle shift to accomodate the painters definitely stressed 2 plants. One was removed. The second i am retardedly going to keep. I stripped off lower weak buds that had the nanners. Pruned a few weak axilla, too. The nearby plant pistils are lily white, so it should be fine. The pistils will be changing color soon, so that will no longer be a good way to assess the risk going forward. Meh, I know it was caused by light stress, so any seeds not selfed I'll probably keep them. Overall, I'm relatively happy with development. Need to adjust some procedures in next cycle and maybe a few more tweaks in winter 2025-1. Second irrigation went well, but i did find a partially clogged emitter. Probably a plastic bit from hold-punching. With 8 emitters per pot, the overkill makes it irrelvant and the pot wasn't the slowest to finish. A few emitters has some roughly milled inlets. I'll inspect them all over the next couple weeks and replace some as needed. Just realized my new dehum was glowing in my tent the entire time. Luckily the display was facing away but now has a cardboard flap blocking it. If it was fine before, it's even safer now. Photons had to bounce of a wall and travel 5' before it could hit any plant. ----- Early update before end of week upday: So, I've been procrastinating replacing the irrigation setup. It's slowly gotten worse each year (3rd ongoing), but never had the dripper devolve into a dribble. I've been hand-watering 1 or 2 pots the last week or so. Replacing the mini sprinkler heads only fixed 1 of the problem-pots. Think the fittings are leaking on the one that did not improve. All the pvc is gone. All the 1/4" manifolds and tubing are gone. The per plant adjustable nonsense is the worst idea ever as all it does is cause pressure changes and endless tweaking of all the little sprinklers, because changing one impacts all the others, or a speck of dirt might cause a new imbalance that requires adjustments etc - Fucking nightmare of useless repetitive behaviour. Still have the 3/4" ID lead-in, heavy duty, 450psi graden hose with ball shut-off valve and pressure regulator. That is now connected to a 3/4" wye with two 1/2" irrigation tube adapters attached to each end. This forms a loop around the pots with a 1/2" tee per pot that leads to a gate shut-off valve and eight 2-gph pressure compensating emitters - 96 in total. Will do first test run on Sunday. The great thing is that this is all plug and play when I switch to injectors. That'll require some sort of pvc manifold and check valve at the utility tub, but otherwise just connect hose, and it's golden. That's the next step. I'll also re-incorporate the wifi-enabled solenoid valve at that point. Getting rid of the 55-gallon reservoir and pump would be nice. One less thing to maintain (rez) and less things that can break down (pump / powerhead). ------ Sunday Test Flawless first run. Time will tell if they are resistant to clogging, but optimistic at this point. 18psi operational pressure at the irrigation loop. Didn't even need the regulator. The mesh strainer at the pump intake doesn't have the typical, small air-bubble, so the last setup was letting a little air in. The last setup was fatally flawed. Pressure compensating emitters for the win. They didn't even squirt wildly as the air was expelled from empty tubing on first run. Took ~4mins or so. Some pots finished a bit sooner, but that's because they don't drink as much per 24 hours. I can live with that kind of waste. I'll get the timing down to reduce water usage even further. I don't need to wait for every pot to exhibit runoff as that is beyond 10% runoff needs. Might be able to get 4 fertigations before refilling reservoir instead of 3. We'll see. I don't like the minimum ~12-15 gallons sitting over night. It fouls the reservoir faster at low volumes. Anyway, super geeked. They better not clog easily, lol....

Coming soon

Moin moin, Entspannte Woche gewesen.. - bedingt gegossen (50-100ml) (RootJuice) - Befeuchter bei Bedarf gefüllt „Wichtig ist immer destilliertes Wasser zu benutzen da sonst das Gerät verkalken könnte.“ - Controller auf 0,7 VPD Stellung

Ahoj.Začíná nám druhý týden květu.Je to prales.Ohýbám zatím listy pod sebe.Ať to roste,přátelé. :)

Auto looks done. Pakistan Valleys look almost done. Candy may need another couple weeks. What do u think i should do guys? Should i wait and harvest all together? Or harvest the auto now, then the kush and lastly the Candy? What's the best way. Also i had been planning to dry them all in my tent. If I do a staggered harvest, i have to build a box or empty out a closet to try and dry them in 😫

Nice terps an frost production , yield is 💩

Hey everyone at week 4 know and wow have these girls grown early this week I applied some LST and all took really well to say it was my first time trying this

2024-05-15 No big thing to report, The Planties doing well, established in the new Pot- I placed them in the youngsters room, so they will get stronger light, and gettting more solid structure. BREEDER INFO Tangerine Snow F1 Fast Feminised is a 75% sativa, four-way cross of (Boost x Tangelo) with (Lavender x Power Plant). This Fast F1 hybrid is bred from Cali genetics and boasts great citrus terps, high resin production for extracts, high levels of THC, very good yields and excellent mould resistance. Tangerine Snow F1 Fast can be grown indoors as well as outdoors. Indoor flowering times are between 8 - 10 weeks while harvest time in northern latitudes is during September while in the southern hemisphere growers will be harvesting during March. Recommended climate regions are hot, dry, humid and warm. These are tall, semi-branched plants that grow in excess of 200cm and display a high degree of vigour with very good uniformity. In common with many other heavily sativa-dominant strains, Tangerine Snow F1 Fast offers excellent resistance to mould as well as to plant pests and diseases. The combination of citrus terps and plenty of resin makes thi a very good extract strain with the 'washing' method delivering very good yields of hash. The citrus terpene profile is reminiscent of mandarins and tangerines and also has sweet candy notes. THC production has been lab-verified at a strong 24% while CBD is low. The effect is uplifting and energising, perfect for use during the day and early evening.

When trimming I noticed one plant hermie a few banana bunches here and there but luckily it does not seem to have seeded the others but I’ve currently only harvested the one with bananas. These plants stink I have showered and changed clothes and ppl still asking me if I have something on me 😝💪🌱 will do dry cured photos of each plant but every plant is 100g + dry weight

last week, neglected fertilizers. The result - old leaves turn yellow and die.

Finally started seeing some baby buds! YES!!! I really start running into issues with humidifier staying on so I've basically gave up on it, at some point around here I added a heater near the inlet fan and it's jumped the temp numbers up quite a bit Some log entries: 1/21: Fed w/ 2 gallons for all 4 15ml big bloom, 10ml grow big and tiger bloom, 2.5ml cleankelp. all units per ga h2o 1/24: Fed w week 7 noots, trimmed 1-4, heavy on 1 & 4

During a beautiful spring evening somewhere in May, the idea came to me to choose for a new hobby. And because I enjoy gardening very much and also like to smoke a joint, I decided that night to try to grow my own weed. And I also wanted to challenge myself to grow the best weed I possibly can. That's when I started to read up on all the facets of growing cannabis. From materials to technique, from strains to the anatomy of the plant, I prepared myself for at least 2 months before even one seed went into the soil. And partly because of this thorough preparation, I can now say to myself afterwards that this is the maximum I managed to get out of it. And the great thing about all this is that after these past 4 months I have learned so much more! Therefore I already know for sure that my next grow will be even better. Below some tips for my fellow newbies, they might help you during your own grow... Material In addition to the lamp, the tent and the right nutrients, which I commented on above, I have benefited a lot from a humidifier and dehumidifier over the past 4 months. Especially in the first weeks of growth, a humidifier is very useful so that you can keep the humidity around 60% (or what the VPD chart tells you depending on the temperature). During the flowering phase it is very useful to use a dehumidifier so that the humidity remains below 50% and at the end of the growth even close to 40%. That way you also exclude the risk of mold and bud rot. It is also useful to use these devices during the drying process so that you can keep the humidity around 60% and dry your weed slowly (at a temperature of around 15.5 Celsius, drying takes about 14 days). Drying slowly and coolly definitely benefits the smell and taste! What's also really a must are an EC and pH meter, without these 2 instruments it is actually not possible to realize a perfect grow. Make sure you use a reputable brand like Apera, they are a bit more expensive but always deliver spot on. In total I invested about 1500 euros in material on my first grow. This is also because I wanted to do it perfectly and therefore only went for quality products. But all in all I think I earn back my investment within 2 runs, taking into account that both my friends and I will never run out of a joint 😊 Seeds Good genes are important to ultimately achieve a good end result. Therefore, do not save on the seeds and buy them from a reputable breeder. That way you can be sure that you will grow strong and healthy plants that can withstand pests and other negative influences. Well begun is half done and this is especially true when growing cannabis. Technique Of all the training techniques I have used, I would like to specifically mention one that surprised me the most: Supercropping! Because I did this grow using the ScrOG method, I wanted to create as even a canopy as possible. The type of lamp I use is also most suitable for this method. But no matter how well you train your plants, they will eventually stretch unevenly during the first weeks of flower. I therefore snapped about 8 stems using Supercropping, which made my canopy nice and even again in a way that each branch gets the same amount of light. And the colas on those branches turned out SUPER nice! Also the nuggets beneath were growing bigger because they too got more light. I will certainly use this technique even more in my next grow! Will I will definitely use a diary again I will definitely use VPD charts again I will definitely use a feeding schedule again I will definitely turn my light on during the day and off during nighttime again I will definitely use the ScrOG method again I will definitely choose a feminized American strain again I will definitely use a webcam again (Wyze Cam) I will definitely defoliate even more during the 4th week of flowering I will definitely go higher on lollypopping I will definitely Supercrop more I will definitely dry my plants slowly and cool again (15 days at 60% RH and 15,5 C) I will definitely continue to learn more and prepare myself even better for my next grow again 👊 Won't I will certainly not water my seedlings too much again 😅 I will certainly not go for 3 plants again, but instead for 4 plants per m2 I will certainly not hesitate to ask experienced growmies for help again 🙏 (next week I'll comment on the bud dry weight and give my final smoke experience)

A BIG hallo to You all my familly and usual visitors. Thank you for stopping by and all the likes and comments....You rule! I'm late with the update again because of the holidays and the Black Weekend shopping spree ;) So all the pictures were taken on November 25. Everything runs smooth, The Blue Cheese is truly catching some blue colored buds and leaves....the leaves are also yellowing a lot right now, that you have to forgive me ;) But it's ok because this lady has one last week befor finish. looking at the trichomes mostly they are cloudy with some amber and transparent both present, so i start flush any day now. The bright Mars Hydro TS 1000 is kept at 33 cm from the top of my plants is is running on full power. TS 1000 gives a full spectrum of light to the plants and you can see that... Mars Hydro did a very good job producing this lamp. Thanks to Mars Hydro for supplying the necessary equipment for this grow. That's it for this week folks, have a wonderful week.

Today is day 51 of flower and the top bud site calyxes are already showing a good amount of amber on the trichomes. Maybe being stunted in seedling phase caused some change in the plants growth hormones. Who knows? I’m still gonna give her at least a week until I chop her. Gonna have to start checking overall plant trichomes nightly though just so I can get a feel for the plants overall maturity/ripeness level. So excited for this harvest. The plant smells like heavenly maple syrupy butter lol.

Hi everyone, brothers and sisters farmers! Welcome to a new week in the Gardens of Queen Peaky. My girls are reacting great under the net and are filling every empty space. my best regards See you around,

end of week 6 flower | damage not gettong worse | beautiful colors and look | strong rotten fruit smell | its gonna go into the freezer and will be washed in winter

1=497 wet .2 = 426 wet