Flower moving along. Added big bud from advanced nutrients to res on day 32. EC is 2.9 DLI is 60.

Hey growers. This week I decided to water with a heavier ppm as the plants didn’t seem too happy. They were showing some yellowing on the lower leaf tips. Guess I was right bc they exploded up to about 12” +-. Then I decided to top and LST the main stem. Today I just adjusted the ties, removed 1-2 leaves from each plant depending if there was any in the mud or not. Yesterday I watered with 525 ppm, but unfortunately the water was a bit on the cold side and they’re having trouble soaking it up. I have since created a rez in my grow room just to hold RO water at approx 70 degrees. So that problem should be rectified. I think I’m right on the cusp of preflower as I’ve seen one or 2 pistils. Regardless they’re doing their thing and I’m trying to do as little as possible to keep them vegging as long as possible and end up beastly!!! Happy Growing 🌱

Our number #17 grows really well, the leaves have only a few flaws and are tapered a little curled perhaps but I think that's the effect of the beginning, the stem is straight and does not bend and is very well proportioned. I am giving Plagron Pwer Roots rooting soon starting with Alga Grow. The plant grows well, the leaves are regular and very turned towards the light, it is very proportionate even I don't see stretching, bending and things that don't convince me. The girls have already been poured into 11 liter jars because the biodegradable jars have started to decompose prematurely, no problem let's go to the ground. Music of the week provided by Radio Nula from Slovenia. https://radionula.com/ Thanks to friends of Seeds Mafia try this and their other creations seeds > https://seedsmafia.com/en/ Light and tent > https://marshydro.eu/products/marshydro-sp3000-led/?lang=it

I harvested at 65 days. Dried for about a week and a half at 55% - 60% humidity and about a constant 61 degrees. barely it in the tent to dry and it was just one plant. It made about 200g trimmed , it was way more than I expected. Easily got over 1 gram per watt since I only could keep the light at 75% because it was too close to the plant. Trimming was the easiest Ive had so far and only took a day with a friend.

The leaves continue to turn yellow from the bottom. It seems that I started fertilizing too quickly and the tips of the leaves burned a little

05/27/2021 Its been a while but all is well, the red light only seems to have encouraged lots of new growth. But I think I'm going to stick with 25-50% blue spectrum and 100% red for the finish. I'm kind of disappointed that she has no distinguishing smell, but she was bred for resistance to PM specifically. All the good stuff will come once i have stabilized consistent PM resistance. (Work in progress) Then the good stuff will be worked in..... If needed. Ps. I do believe it will likely be 12+ weeks of flowering to finish (Hope she has a racy/trippy sativa side) fingers crossed🙏

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Entramos hoy en su 4 semana de flora y hemos realizado una poda de bajos, reducido el tiempo entre riego y riego a 2/3 dias entre uno y otro. El uso de Acti-Vera muy recomendable la verdad es que hace magia en tus plantas.

14/12 _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_- Hey Growmies, We’re back for another journey, this time with Auto Northern Dragon Fuel from Super Sativa Club, one of my picks after the contest! Super excited to see how this girl develops. 🔥🐉 The soil was prepared using my usual recipe: a mix of Biobizz All-Mix and Light-Mix, combined with Lupre Supersoil and Microlife from BioNova. For root development, I decided to go with Mykos this run. Let’s see what she’s got! 💚🌱

It's Day 35 Week 05 Of Flower For My 02 Kombucha Cream By atlasseed . And For My Snow White and SpliffStrawberry By Spliff Seeds Amsterdam . Today was Hair Cut Day For All 4 Lady's. Happy Growing Growmies 🤘🏻

Strawberry Gorilla harvest

Day 57. And Mimosas are real sl@ts ..... No doubts, they all time were most picky and stupid, but big, very big ... Only two from 3. Last one is the smallest plant from all first wave. Very strange . Smoothie's are nice, grow without big hiccups, maybe a bit of a runners, but all 3 looks very similar. Purple Punch - both small, the one in best light is giving me hope that I will chop her before holidays and will make some space for the guy who will be watering them during my offs. They are overfed a bit. So no feed all week. Just water. Two biggest Mimosa's will be transplanted into bigger pots, they drink a lot, dry too quick and are sad in my mind, so I will cheer them up with bigger pots this week. Still selective defoliation, some yo-yo, so ties and no spray anymore. Smell is getting stronger, but didn't bother to try one or other. Still nothing special or super smelly yet ... In the middle of the day Mimosa's finally happy, but before lights down - theirs leaves are down too. Overdrying them constantly too, can't wait to give them better house, that type of fight I hate. Day 60. All work done ! Huge work ! All girls were cleaned, defoliated and pots toped up with BioBizz Worm Castings. Both Mimosas got new bigger pots too. Happy Growing !!!

day 55 trichomes starting to amber so flushing 40l of ro water with 60ml athena cleanse . the plant is smelling insanely fruity will flush for 4-5 days depending on the look of the plant 👊

Im Zelt riecht es gefährlich gut🍪🍒🍋🍓 .wenn die kleinen so schmecken dann Feierabend😅😁

Las 4 nenas del scrog iniciaron con el ciclo 12/12 el día 05/11/2021: están siendo alimentadas con advanced nutrients(dosis indicadas en la foto de la tabla) -micro -blom -grow -b52 -rhino skin -big bue -bud ignitor -bud candy -sensi cal mag xtra Las 2 nenas en macetas de 30LT 18/6: por el momento están siendo alimentadas con advanced nutrients(dosis indicadas en la foto de la tabla) -micro -grow -blom -b52

Ooooooweeeeeee they’re all doing so good even the extras that I threw in flower with out cloning are doing great .. in just 2 more weeks I’ll throw the donor plants into flower

Back Again , well the FBT09/Sour Diesel plants are looking fine . The normal plant is looking really good and has very distinct spiked leaves . It also has a slightly tighter internodal spacing than the its sisters all except for Tester 2 which is the bushiest. The other plant (polyploid) is also bushy but in a mutant abstract type growth pattern , It has two heads even tho I never topped it . 👽 This is a Freaky plant hope it produces some freaky Buds 😝 I gave the girls a feed of Mr B's Green Trees Bloom Mix (third of a cup per pot) and a qtr tspoon of Great White. Thats it for this weeks update Be Back Next Year.👍

Comenzando ya la ultima fase del cultivo, descubrimos una paleta de olores bastante amplia la cual nos recuerda olores como Mango fresco y Melón Tuna, olores bien marcados. Comenzaremos el lavado de raices, ya que empezamos a ver tricomas con tonalidades "ambar", esperemos seguir con este resultado el cual nos tiene bastante satisfechos. !Saludos & Buenos Humos! 🙌