The Grow Awards 2026 🏆
Processing
Likes
Comments
Share
Hey guys! It was a hard week for my and my experience. The toxicity I think I had was nit cause by nitrogen, but it was a wind burn. Leaves were curled down becouse of wind, so almost 2 weeks with no nutrients caused me nitrient deficiencies. So yesterday I started with normal feeding again. Plants, especially ones on the right will need a bit more time than expected, I guess. Yellow leaves will be taken down soon, I just dont want to stress plants too much at the same time.
Processing
Likes
5
Share
i recommend everyone to go give @superautoseeds (auto seed) a try. i promise ya wont get dissapointed
Processing
Likes
27
Share
@lMorphine
Follow
This week i pull the light down to 40 CM away from the colas preparing for flowering stage. this week i in crease an organic food ratio to 3 ML/L and in a couple of weeks i will increase a little more to 3.5 ML/L and still feed in Veg nutes. I think, She is quite ready to get through the flowering stage. Any recommendation for me before i turn to 12/12 cycle for flowering?
Likes
53
Share
Welcome to Bud Boutique Grow Diary - really appreciate all your love and support :) Dont forget to check out my other current grows! 🗓️ This Week: - Day 52: the end is near - Day 53: Trichomes check from #1 and #2 - looking super good almost all cloudy, a few amber and clear. perfect point to chop - Day 54: this one is finished, let's chop them both #1 & #2 !! ✂️✂️✂️ - both phenos got still super purple beautiful leaves - now its time to dry inside the tent at about 60%rh and less than 20°C/68°F trying to get it even lower for the next 10-14 days ___________________________________________ --- 🌱 Strain (Sponsor) --- 🏷️ P.C.R. by Art Genetix https://www.artgenetix.world/product-page/p-c-r --- 🥗 Nutrients and Feeding (sponsored by APTUS: APTUS Ambassador) --- 🍸 APTUS: full nutrient schedule extreme -- Regulator, N-Boost, P-Boost, CaMg-Boost, K-Boost, Allin1 Liquid, Startbooster, Topbooster, Enzym+ every feeding -- Fulvic-Blast, NutriSpray as Foliar each once a week 🔗 https://aptus-holland.com/ --- ♻️ Grow Control (Sponsor) --- TROLMASTER: TENT-X + LM14 Light Adapter to dim/sunrise/sunset lights + Temp & rH Sensor all remote on App 🔗 https://www.trolmaster.eu/ --- 🚿 PetraGrow (Sponsor) --- CannaFogger Foliar Spray 🔗 https://www.petratools.com/product/petragrow-cannafogger-atomizer-new-mini-fogger --- 🏭 Grow Setup --- 💡LUMATEK Zeus Pro 600 * 🏠🌿 Indoor: Homebox 120x120x200cm (4x4) * 📐🌀 PrimaKlima exhausting Fan 1180m3/h (running on 60-80%) * 🌀 Can Light Filter 800m3/h & 1x Fanbox 1x Dyson fan for Air circulation 🔗 https://lumatek-lighting.com/zeus-600w-pro-29/ 🔗 https://primaklima.com/de/shop/ventilatoren-de/ec-ventilatoren/pk160ec-tc/ 🔗 https://canfilters.com/products/filters/ All Likes and comments are highly appreciated!!! 👨‍🌾 don't forget to check out my Instagram for daily educational content: budboutiquee - Bud Boutique
Likes
11
Share
Videos: 10 días despertando , transplante 12 días , algunos sistemas radiculares y despertando post transplante . 🌱Solución de riego a micorrizas : Mycochum y luego riego completo cuando despierten . Ocupamos granular y great white en polvo para transplante , mitad y mitad. Ph: 6,0 Ec: 0,7 🌱Solución riego a foleo 1 hora antes que despierten : 1 litro : proactive 5,0 ml y knactive 2 ml. Ec : 0,5 Ph: 6,0 🌱Sumamos alfalfa alrededor de los tréboles 👑Actualización Jardin 18-19 días . ⌛️Videos : 🎥18 días , con hambre y sueño. 🎥19 días antes de dormir 🎥19 días despertando post foleo y post preventivo de tierra de diatomeas , listas para transplante en 1 semana . 🌱Solución foleo 2 litros : knactive + proactive (4,0 ml ) y ( 0,8 de proactive ( melazas , quitina , etc ) Y sumamos preventivo después que se secó el foleo. Ec : 0,4 Ph: 6,1 🌱metimos amarres al central y full lst .
Likes
16
Share
NOTE: other harvest pics will be in the week before. I can't upload everything into this week so I picked a few but I want to save space for dry bud pictures as well. If you wish to see more harvest pictures. Go to the week previous and look at the end. Chopped at day 63 with about 15% amber on the top buds and then only cloudy on the mids and lower
Likes
19
Share
Let’s go day 72 from seed!!! Another great week it’s been , 2 Ogreberrys an brucy b been flushing for a week, an the 3 others will continue to get there normal feed of nutrients, they are just not quite ready so they will start getting flushed around next week!! Sweet sweet smell of Grapes And gooey frosty nugs is all I can really say, photos do no justice, some of the craziest fruitiest smelling buds I’ve ever had, Real High quality meds !! Hope you all enjoy an have an amazing productive day as well as a great week!! Peace love an positive vibes to all y’all Cheers 😶‍🌫️💨💨💨💨💨🤙🏻If there’s any questions, please ask!! 💚🙏🏻💯
Likes
27
Share
@w33dhawk
Follow
Moin alle zusammen diese Woche war wieder nicht viel los. 23.03.23 Giessen 3L Wasser und 0,5L Compost Tee danach eine leichte entlaubung um den Luftstrom zu erhöhen und etwas mehr Licht in das Blätterdach zu bekommen. 24-26.03.23 chillen und genießen 😋 27.03.23 Giessen nur Wasser (ab gestanden ohne Ph Anpassung) 3,5L 28-29.03.23 chillen und genießen😇 Edid: zum Geruch der Moschus Ton ist weg daraus ist in dieser Woche eine zarte Karamell Note geworden die die Haupt note ananas küsst wirklich eine sehr leckere Geruchs combination zudem wird der Geruch von Tag zu Tag intensiver und es mischt sich der typische Gras Geruch drunter aber nicht zu aufdringlich! Das wars für diese Woche ihr growmies!
Likes
22
Share
I can say I didn't expecting this.. she amazed me, and teach that you can get decent amount of buds in 1L pot also.. this is my first growing in small pot and teachs a lot about using your space..54300
Likes
9
Share
Apliqué superboom compactor,unos 3 gramos,repartidos en 3 riegos.Seguiré un par de semanas más refando con esta mezcla.
Likes
17
Share
@Wakesk8
Follow
Today is 1 month for those babies!! Happy Birthday 🎂 ☄️🎊🎈 Other 1 week and half I will switch in flowering!! Happy Easter to everybody!!
Likes
47
Share
@Natrona
Follow
Divine Seeds Auto Candy Outside Grow Contest 👉Sponsored👈 W5F1 July 6-12 We had a break in the temperatures and humidity this week. It’s been in the 80s and Iow 90’s. It’s still hot but the heat index remained below 100. Auto Candy had a growth spurt this week doubling her size from all the rain and heat. She is 12.5 inches tall and so far, doesn’t mind the heat and humidity. My little candy girl is becoming a lady. Little white pistils appeared at the nodes. Bring on the flowers. I give water only from the well and I do not ph. , Fingers crossed she will be strong and take the heat like a champ. As aways, thank you all for stopping by, for the likes and most of al growers’ love and support. Stay green, growers love 💚🌿 💫Natrona💫
Likes
15
Share
Indoors flowering nicely, brown hairs starting to show. Outdoors still one of the Ultimate still hasn't started to flower. I'm starting to wonder if it's not an auto at all. The gelato is forming nicely, with a little visitor a bee. The other ultimate is also flowering nicely. Day 75, due to hothouse damage the three outdoor plants are now indoors
Processing
Likes
24
Share
**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8
Likes
7
Share
@Messypies
Follow
With the majority of trichomes now turned milky with some turning Amber, i have decided to begin a 10 day flush using nothing but ph balanced water. Doing a shorter than normal flush as the plants with deficiencies don't have much nutes to use up.
Likes
58
Share
@AsNoriu
Follow
Day 74. One more victim of war against bud rot. Prevention needs sacrifices sometimes... Day 78. Second was sacrificed for more space too ;))) Day 84. First girl is Jared . Fantastic bud quality !!! Day 88. I said fantastic quality about first one ??? ;))) That's till I touched second !!! Purple phenotype is pure joy for eyes !!! Happy Growing !!!
Likes
20
Share
Best flower 🔝 Strong flower. I love qualitty of HSO. everyone recommend This strain. 💚 Thank for watch. ✌️🏼🔝🔝🔝
Likes
5
Share
@Dabking
Follow
Chopped on day 84, dried for 8 days. Dry weight: 5.46 OZ (152.8 grams) Smells great, now it's time to cure. The trim job was easy as well with the structure of the plant/buds.