Recommended
Processing
Likes
Comments
Share
sorry for the late update and light on pictures but because of thanks giving and family and what not this was put together very fast so i could do a small update of this week added a video to make up for the lack of content
Processing
Likes
7
Share
@Kushizlez
Follow
Days 35-42 (Day 36) Some minor problems starting to arise here. A few times this week it got up to 90+ degrees which I think may have caused a bit of heat stress in some of the plants. I’m seeing a bit of cupping/crinkles on some of the fan leaves and some of the new growth is looking pretty gnarled and twisted. I hear windburn can cause this too so I’m turning my fans down to low speed. This could also be a problem with humidity so I’m going to turn off my humidifier, dim the lights and raise them. During my last feeding I mulched in some worm castings but it seems like they’re keeping the soil/coco from drying out. Pots are still decently heavy and even the surface is still quite moist but they aren’t showing any major signs of overwatering. I figure it will only be a few weeks before the castings break down so I will just leave it. A few of the plants are starting to show yellowing leaf tips which is probably some kind of micro nutrient lockout from my PH being slightly too high. It could also be from nute burn so I will water in 6.0 until I see some runoff. Although the most likely culprit is potassium excess. I’ve been feeding potassium almost as much as nitrogen so far. I know that can cause the yellowing of leaf tips by locking out trace minerals. It can also cause leaf problems like crinkling. Excess K can even cause water retention! Will water at 6.0 until run off next watering. The lst is coming along nicely. It was a good idea to remove the first two sets of branches (not leaves). Now I have 4-6 perfectly even stems coming from each plant that I plan to top one more time each. (Day 37) Today I’m going to vacuum, clean, wipe down and spray all my equipment in the tent. I’ve been letting the floor get quite dirty and I haven’t had the chance for a thorough clean since last round. I’m kind of surprised I haven’t seen any powdery mildew yet. I guess the prevention spray is working because the room has to be infected from my last crop. (Day 40) I was reading that you can foliar spray whatever you are deficient in for an immediate uptake. I‘m going to try that with my current potassium excess since it locks out trace minerals. I’m going to foliar feed a bit of phytoplankton at 15ml/L and some MagnifiCal + VeloKelp from Remo nutrients both at 5ml/L. The cal mag is not organic but as long as it’s not going into the soil and doesn’t contain chlorine I’m fine with it. I’m also going to be changing the light cycle to 18/6 for the remainder of veg. This will be their first dark cycle so they can properly foliar feed. Edit: humidity shot up to 85% a few hours after foliar spray. I went to top dress everything today and I mixed up the plants while doing so! So the ones I was unsure about I gave 1 extra tablespoon. I won’t top dress again for at least 10 days. Might give a light tea sometime next week. I also tilled the shit out of the top of each pot. It had a hard crusty layer on top that was keeping the medium from drying out properly. I’m not going to water again until everything is bone dry. Then I will water until slight runoff at 6.0 ph with some Dr. Marijane bacteria/root probiotic. I’m starting too see a lot more of these abrasions on some of the bigger fan leaves. It almost looks like thrip damage but I’m 100% sure it’s not a pest above ground. It could be bulb mites, which I found in my worm castings but I can’t check until the roots are more established in their pots. The leaves themselves are cold and feel damp to the touch. I haven’t even seen a fungus gnat since I last fed. I’m hoping it’s related to the K excess and clears up with the troubleshooting. (Day 41) Just ordered a wire cube rack to prop my plants up with and help evaporation/root warmth. Each cube is 11.8”x11.8”x11.8” and it comes with 16 cubes. So it will fit just perfectly in my 4x4. Depending on the size, I might order another one for the flower room where I would need 25 cubes.
Likes
108
Share
@D33jW
Follow
Harvest Update – RUNTZ Both RUNTZ phenos have been harvested, officially bringing this incredible journey to the end. It was a grow full of satisfaction, learning, and beautiful results. I’m truly impressed with the genetics from Zamesia both plants delivered super dense, frosty buds with an absolutely insane sweet and candy-like aroma. The terpene profile on these girls is just mouthwatering and promises a top-tier experience in the vaporizer. Solid, rock-hard nugs on both phenos this strain really lives up to the hype! Special shoutout to Plagron and their product Green Sensation – it worked wonders, especially in the final stages. I’m convinced it helped push the trichome production and aroma to the next level. 🔥 Thank you to everyone following this grow and to the contest organizers for the motivation and great vibes. Stay tuned – and keep growing 🌱
Likes
7
Share
The strain is not the biggest yielder but its quite promissimg,the smell is top and the effects are a very mellow creative smoke,tastes like sweets,will grow it again ✌️✌️
Likes
5
Share
@GODAXE
Follow
01.08.2024 D63 everything grow well, we got a mixed temp, mostly sunny with some rain. BlackBerry steal the show, the bud stack and take mass, with a nice black purpish tone, it started to smell sweet and fruity. FastBerry building three massive top cola, some slowly start to show nice color, it smell more fresh and sour Berry..
Likes
20
Share
Buenas noches familia, aquí ando fumando un plajo, actualizando esta farm cheese que no veáis cómo empieza a oler, bastante sana, acepta muy bien la alimentación , un fallo podría ser que me pidieron agua y hasta el día siguiente nanai, pero nada serio. Ph controlado en 6.2 la temperatura no sube nunca de 26 grados con el led de mars hydro y la humedad se mantiene por debajo de 50%. Todo va muy bien. Poco más que decir estoy deseando que pasen las semanas para cosechar, buenos humos fumetillas.
Likes
1
Share
2/13: Stem still seems stretched from the shell being stuck on the leaves. 2/16: Decent heat stress observed an afternoon. Temperature was 80° and the light has been at 100%. Move the light to 26 in and open more events in the tent and window in the room to let in cold air overnight. Time to temperature got down to 62°. 2/18: Heat stress is improving. Keeping her well watered.
Likes
29
Share
@Lazuli
Follow
This strain was only topped in early veg and trained a little bit with LST. After 5 weeks of veg i removed the LST cords and just let her go and what a bush she was, very fat dense heads everywhere, bottom buds also rockhard. I used no boosters just organic nutrients from start to finish in pure coco
Likes
1
Share
So for the very first time I trim a lot of green away- while this I got a scrimp while every single leave that I remove. Idk maybe I should remove some more the plant already recovered be me not haha All baby are at flower now but I f..ed up and brocke the main while lst…it’s my first grow so I take it easy and will see what will be at harvest day. Think about to take another tent looks to small for they’ll all. Didn’t thought they get this big
Likes
2
Share
The plants look like vegetative phase II is starting, so I've added PK 13/14 to the nutrient solution this week. I have also replaced the light hangers and got the distance back to around 20-40cm. The CBD's leaves are curled up quite badly up top, but there isn't much I can do at this point. The other 2 tall plants don't seem to struggle as much with the light, at least judging by the leaves. The tall ones all have some burnt tips up top, which I assume is also partly related to the light - and maybe the clogging related dryback we had last week. For now everything seems to be back on track. I expect the plants to take at least another 3-5 weeks.
Likes
10
Share
@6toecat
Follow
Using a Rhaspberry Pi 4 to automate the watering and a TP-link 105 smart plug to automate the Viparspectra P2000 LED grow light. You can see how I automated it here: https://hackaday.io/project/188129-rhaspberry-pi4-basic-watering-system-for-balcony Basically, this is an "Automated Watering how-to Guide for Dummies" - as simple as technically possible. You still require some basic command line expertise, but the steps have been proven and I provide links to the gear I used AND the Node Red code, making this EASIER than anything else I've seen online.
Likes
120
Share
Well I had been running my dehumidifier, which blows hot air out the top. The fan then blew that hot air over the canopy resulting in some heat stress on the front plants 😭. I think I caught it in time and made appropriate adjustments. One a good note, the Red Hot Cookies in the back are so heavy with buds, the branches are almost touching the ground (gotta string 'em up). Lol
Likes
17
Share
Gracias al equipo de Zamnesia, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Frosted Guava: La Frosted Guava es una cepa índica dominante y súper resinosa, que es un cruce de la Guava y la Frosted Skywalker. Con unas características de cultivo muy versátiles, un aroma exótico y afrutado, y un subidón relajante y lúcido, la Frosted Guava es ideal para cualquier plantación de marihuana. 🌻🚀 Consigue aqui tus semillas: Código Descuento 20%: ZAMMIGD2023 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 📆 Semana 4: Aparecieron un monton de erizos esta semana, el temporal ha hecho algo de mella en la carpa al bajar las temperaturas aunque todo sigue correcto. Continuamos con las dosis de nutrientes recomendadas por el fabricante.
Likes
39
Share
@J_diaz420
Follow
Muy ansioso con este proyecto, mi primer cultivo s.o.g gracias a royalqueenseeds. 48 hrs en papel húmedo dentro de un pote hermético y luego 24 hrs en sustrato a luz apagada antes de comenzar con el fotoperiodo de vegetación. El sustrato es lightmix y solo añadi micorrizas granulares . Veremos como resulta este proyecto 💪✌️🍀
Likes
16
Share
All done and dusted on this bad boy. Nice big bushy auto that did its job from the beginning. It was always harder work than the Do Si Dos and with what I’ve hung up to dry I don’t think it’ll have a larger harvest either. The smell is super strong and very fruity and will give an updated the final smoke and weight. 🙌🏼
Likes
16
Share
Comenzamos la floración con estas chicas, estoy muy encantado con ellas la verdad para que les voy a mentira, muy ansioso de empezar a ver sus flores, pretendemos fertilizar solo hasta la semana 5 por ahora. Estamos solo con 1 riego diario estuvimos de 1L ahora lo subimos 2L y lo recibieron muy bien. Algo en particular es que estamos probando cannaboost folear, se lo estamos dando 3 veces por día a la planta hace 10 días y no vamos a parar hasta el día 21 de floración para luego cambiar a dosis radicular, estamos haciendo esto para economizar cannaboost y comparar resultados con su dosis full que ya la eh testeado. A las nenas se les hizo super cropping (en mi instagram pueden ver un tutorial @chocolopeison) hace 7 días a las cuales también le agregamos unos soportes y hoy ya la pasamos a floración recuperadas con una gran defoliación de bajos. Ahora esperaremos día 14 para hacer otra defoliación, super cropping y guiado de malla que pronto estaremos instalando. La iluminación estamos con 540W de qb (2 @heavengrowlight y 1 @meijiu)
Likes
44
Share
Just flipped everything is growing like mad all the revegged monster cropped clones n that had been in flower n now hav fresh growth am buzzin will need to go in n defoliate a bit lolly pop and clean it up a bit bit yeah oh yeah chedder does it well @chedderbob112 @s2340420
Likes
1
Share
@teabee
Follow
pretty happy with it, nice yield, one plant was perfectly fine and one was a little rough near the end, one plants nugs were very dense the other plants was a bit on the fluffier side. Nice strain but a great rosin producer..
Processing
Likes
2
Share
@Justrite
Follow
End of week one of germination . Currently setting up veg tent and still tinkering with set up . Germinated in pre soaked rock wool cubes with rooting stims and a 1ml of m g b and then cover with a bit of light mix and just using cal mag water watered over the top when required , when they start to take off I’ll use a mix with rooting Stims Again to get theM working with the autopot system Pizza , luv & Techno ;)
Likes
41
Share
@Kmikaz420
Follow
Désolé mais pendant plusieurs jour je n arrivé plus à charger mon journal ? Bref dernière arrosage avec nutriments ;) on y arrive tous doucement . Autrement j ai eu un petit départ de bud rot sur la melon gum (rien de méchant 2 calices coincé entre 3 immense têtes ;) j ai donc enlever les 2 têtes et désinfecté aux mieux (les 2 têtes n avez rien j ai donc pu les goûter hier soir et j doit dire l effet est vraiment sympa ;)