Processing
Likes
Comments
Share
@Csmithch
Follow
Buds are packing on weight pretty good for only being at the end of week 3. I think these buds have potential to get some good size to them by the end of flowering period. I noticed a few days ago my timer stopped working, lights were stuck on. Looks like there's no ill effects yet though despite worrying about them revegging if they were left on for too long. Noticed leaf tips are all nute burned so they are at their maximum for ppm as far as nutrient uptake is concerned. Going to back the ppm off by 250 in the next feeds and continue to observe the leaf tips. Plants are still recovering from a nute lockout that caused a mg deficiency and took away a lot of bottom growth from all 4 plants. Ph is back on track and plants are growing rapidly again. Stay blessed and happy growing 😎
Likes
70
Share
All feeds with nutes use either a whole ratio or combination of "Veg Mix" and "Bloom Mix"concentrates DILUTED in water until a total ppm of add in is reached using a (Total Dissolved Solids)TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added in smaller ratios and "Bloom Mix" concentrate what will eventually replace the "Veg Mix" concentrate entirely with the ppm and ratios listed when I feed. Veg mix recipe is on week 3. Bloom Mix recipe is on week 5. Day 28 Just a quick update for this morning since I had to move the ties a little. LST, I now have them above the 3rd node branches. Stats are normal and the growth tips are turning upward now. Stats 73F/ 63% RH /IL Vent at 33% - Lights also same as before 345ppfd highest, 330 center, and 315 at lowest. No need for adjustment. She seems to be taking the training well. Day 29 Water day - checked last night and decided it was time again - Water by weight again so no runoff to measure at about 4 cups. (4 days since last feed by weight) 13lbs even par is 15lbs 4oz so I prepared 2lbs 4oz of water. Tested my meter and discovered it needed calibration (the temp is off and cant be calibrated - so I used a trusty meat thermometer. started with 4ppm and added 300ppm of epsom and vegmix ph balanced to 6.34 at 69.8F - then splashed with H2O2. Poured around roots and splashed the stem base - sprayed some on the leaves and use the whole amount. Had to adjust lights now to be brighter so I brought them down to 18.5" and ppfd is now 375highest 360 center and 345 at lowest. VPD is normal at 1.0 with 73F /63% RH /33% IL Vent - fans are pointed to directly now as the leaves are starting to get rough feeling - so I moved them a bit to blow less directly Training is doing good nice upward turn on the training (making small LST movements with the ties other than than... just letting it make new branches. Day 30 Checked PH and got 5.0 on my meter(+1.25 tested differential = 6.25) Stats normal too - 73F /64% RH /33% IL Vent - Lights at 385highest 370 center and 355 at lowest Removed cross ties since they are no longer needed to hold the fan leaves- training still looking nice as the new nodes are formed with 2nd node leaves growing already. Day 31 Identified an issue this morning - went back through my pictures, identified the start, looked at the day before, and noted my changes that I took notes on at that time. Went to google to diagnose a few possible hypothesis and am now testing with a treatment. (suggestions from more experienced growers welcome) This morning the issue was brown spots on the older fan leaves. Mostly just the left fan leaf. Seems to have started 2 days ago (day 29) when I changed the lights and fed her. When I fed her, I left water droplets on the leaves instead of drying them off after a short time (I had been drying them with a tissue after a wet pic. The fans were also adjusted after the lights were dropped closer as well. Hypothesis: I think the water was magnifying the light and caused light stress at the those spots. I dont think the wind of the fan had much to do with it other than they helped dry the leaves faster as noted by the water being completely gone by the time I took pictures later that night for measurements. Test: Raised my lights to a max of 350ppfd (from 385 highest reading this morning) Had to adjust fans again since they rest on my lights. Will observe looking for improvement over the next few days. ... another possibility was given to me by Guru @Roberts (thank you) as it possibly being a ph issue locking out calcium. So I thought I might test ph and then try diluted cal/mag in a spray if my soil is too low (also looked at pics and seen VERY close similarities in my pics and those) and so on that advice, I tested/calibrated my soil meter (it FINALLY calibrated for me!)I found my soil was avg of 3 readings at 5.153 (5.08,5.09,and 5.29) NOT GOOD - potentially locking out most all nutes. I weighed out about 2 cups of purified water with and added about half ml of CalMag, ph balanced the water to 6.5 at 69.7F (my research shows Calcium lockout starting at 6.3 or lower) and splashed with H2O2 - I poured most around the base and sprayed the leaves too. I made sure to use the whole solution by pouring the last of the solution in the spray bottle over the stem and stem base. EOD follow-up Found a possible calcium blockade in my ph and on my leaves (of which are now starting to curl so I placed my fans on oscillate to ensure they aren't doing more damage) --- fully documented now. otherwise measurements are now documented too. -- second node is starting to pull away from the last top so I will be looking to top again (3rd of possibly 4 total) and then HST and bind in a new spot Day 32 Doing a morning and evening check her now while I see this issue resolved. So far no sign of improvement since last night - might have gotten worse in comparison (will check pics side by side today) but I think because it's a immobile micronutrient so it should take time to stop then reverse. So in the mean time I am doing a slurry test as a 2nd test for my soil before I treat it. I took soil from 3 different spots and made sure I got some from about 4 inches deep in each spot (ensured calibrations were still good with buffer tests) 1st test is a PH meter tested directly in the soil. After using the 2 cups of 6.3 yesterday I got 3 readings today = 5.47, 5.32, and 5.5 to avg 5.43 - (yesterday's readings prior to treatment were 5.08, 5.09, and 5.29 to avg 5.153) - still far below the normal 6 to 7 for soil and the requirement of 6.3 and above for calcium to enter roots. suggesting again lockout. So while I am checking the plant conditions I also looked at the new nodes - 2nd node is starting to pull away from the first, but not quite enough to top yet - thinking I will be able to top tomorrow evening - should be able to correct the ph tonight, so I can see if there's results in that by then as well. I also set the fans to oscillate last night, so here's a video for that now. Measurements, ppfd, and vpd will be in tonight's check-up Day 32 So I started this evening by testing the run off with 2 meters, 5.7 and 5.67 - prepared 1 gallon of 7.5 ph water and splashed with H2O2 (checked with both meters) Before flushing, I documented the leaves again - still curled and look very dry but they still have some flexibility with them - they dont seem to getting any worse so the spray may have gotten enough to the leaves most affected. The new nodes and growth tips seem to be okay but not growing as fast as they were. That would still mean that the soil needs treatment before the roots begin to die off and I end up with stunted growth overall. SO I flushed the whole gallon and noted the runoff from the sides and bottom. I then tested the soil directly with 3 readings 5.95, 5.8, and 5.73 for avg 5.826 and tested the runoff water with 2 separate meters for 5.91 and 5.85 Not sure if I should feed dunk in 7.5 still or just use that number on the next feed in like 3 or 4 days. will discuss Other than that ppfd highest is 360, 350 at center, and 330 at lowest. VPD was 1.0 with temp at 74F /63% RH /33% IL Vent Growth tips could be ready to top again tomorrow night, but I would like the get the ph taken care of first. Day 33 Started the day by noticing the lower branches seem to stop turning and the next level branches seemed to have finally turned but nearly as fast as the first. (Noticed them having a start yesterday) Newer branches dont have any signs of issues. So the plan today is to make Bloom Juice for later. Feed Dunk with 100% Veg Juice at a ph of 7.3 test runoff and ppm. Top the 4 nodes and remove the lower leaves. Calcium issue or not, that was always the plan with main-linning the plant. However, because of the health issues, I dont think I am going to go past these 8 colas - rather instead I will simply stop here and do some HST to set them how I want them to grow and let her recover and finish her veg for about two or three weeks. Dunk had 300ppm of Epsom, Veg juice, in a little over 3 gallons of purified water. I had 7.4 ph and splashed with h2o2. I pushed the entire plant into the water and soaked for a few seconds. Drained by hanging the pot up for about 10 minutes and the stream started dripping instead. Checked the runoff with 2 meters 6.01 and 5.93 with 2580ppm. Then I topped all four nodes and removed the fan leaves from under my mainline. I used LST to finger press the new branches apart into the direction I plan to move them to get the nodes powering up. Next I will wait for a day to do HST on those new branches. Tonight I will simply let her rest. VPD still at 1.0 - 73F /63% RH /33% IL Vent - Lights are at 365 highest, 355 center, and 335 lowest. No need to measure for growth now as I dont plan to top anymore Day 34 Early entry to day for HST the morning after topping. So I started off the morning checking stats and health. PH levels are still low. 3 soil meter tests 5.41, 5.41, and 5.44 for an avg of 5.42 - kinda at a loss here but can only monitor now. VPD and lights are mostly the same - 74F /63% RH / 33% IL Vent - VPD not relevant today as the settings are the same and I am using HST to change the plant position. leaves are noted for future reference - all four lower fan leaves have signs of calcium deficiency but not progressing nearly as fast as the first two did, so I think my attempts via higher ph water and feed may have helped. (I know the microbes in the soil are supposed to help get past ph issues , but mine seem to not be heathy) HST used a cuticle rod from my wife's nail case and a paint stick to press the rod against the branches and smash the inside of the elbows I want to bend. LST I then cut 4 strips of garden wire at the same length, hooked the ends like candy canes and aligned them about 1/2 inch above the new node and into the soil. From the side they look level but have the leaves now facing sideways. They will turn in a day or two.
Likes
34
Share
✅WEEK NOTES: 9th flowering week, only plain water, buds are huge, good maturation and ready to be harvested!! ✅ 🌱GERMINATION🌱 01/10/2023 SEED IN THE SOIL 03/10/2023 🔝 10th NOVEMBER 1st FLOWERING DAY🔝 🔝 9° FLOWERING WEEK🔝 📅this week goes from 08/01 to 14/01 📅 💡💡💡Viparspectra xs2000 at 75% Power + QUANTUM BOARD AT 75% POWER💡💡💡 💉🔍Fertilization schedule:🔍💉 ONLY PLAIN WATER 🧐 🤓 DO-SI-DOS DATA SHEET 🧐 🤓 Brand Zamnesia Seeds Parents Face Off OG X OG Kush Breath Genetics Indica-dominant Flowering Type Photoperiod Flowering Time 8-9 weeks THC 20% CBD Low Height (Indoor) 150cm Height (Outdoor) 200cm Yield (Indoor) Medium Yield (Outdoor) Medium Available as Feminized seeds 💸💸💸💸💸 Buy DO-SI-DOS FEMINIZED BY Zamnesia: https://www.zamnesia.com/7686-zamnesia-seeds-do-si-dos.html _____________________________________________________________________ 🔧💡OUR SET UP FOR THIS GROW CYCLE💡🔧 ✔️ 💲💲💲VIPARSPECTRA 🚀🚀🚀🌕🌕 ViparSpectra®️ XS2000 240W Infrared Full Spectrum LED Grow Light: Excellent ratio between wattage and ppfd, excellent light penetraton, perfect light spectrum (it also has IR 🤩) and it has the best build quality on the market. You can touch that quality. Materials are really strong, excellent driver and the best leds on the market. Heat dissipation is perfect, the lamp is never too hot and it has a passive dissipator so you will have zero noise. It also has IP65 certification. I like that this lamp is bigger than others, so the 240w of power are well distribuited on the space. Viparspectra has an awesome customer service, and shipping was incredibly fast! This awesome brand also offers 3 years warranty. This lamp has no rivals. A special thanks Viparspectra ❤️❤️❤️❤️ HERE YOU CAN BUY THIS PROFESSIONAL LIGHT: https://www.viparspectra.com/products/xs-series-xs2000 or https://amzn.to/3dyUoJl and here you can buy other awesome stuff: https://www.viparspectra.com 💣Quantum board - 480w - 4x120w Boards Samsung LM301B 288 led/board 3000K 0dB noise +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Maximum air flow: 430-560 m³ / h 50W 32-44 dBA ____________________________________________________________________________________________ 🙏❤️ THANK YOU FOR BEING HERE ❤️🙏 Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 We want to thank again everyone that help us in our project. You support us to support our dream. ❤️ SPREAD THE LOVE OF THIS PLANT ALL AROUND THE WORLD 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾
Likes
13
Share
Gorilla Punch will be harvested today, the ZTRAWBERRIEZ also will be harvested in a few days. It seems that the ZKITTELZ needs one day more.
Likes
15
Share
Going out of town for a few days so decided to rig up an automatic reservoir top off system. So added a new 15gallon "pre reservoir" with air stones and a timer pump. Every 12 hours it will kick on and send 2 gallons to the main res, where there is a float valve to shut off at a high water level. Also the tent has a flood sensor if tripped will kill the power to the pre pump. Should be safe to leave for a few days.
Likes
9
Share
@Ronin716
Follow
MANNNNNN.. It’s the end of week 4 and holy hell is she a bushy BEAST!!! She seemingly out grew whatever was going on with her leafs and I’m soooo glad I hadn’t pulled her out when I was faced with the “TMV” nonsense!! She’s growing strong and needs daily adjusting with the lst! Again, sorry if my photos are a little out of order but check out the timelapsed video!!
Processing
Likes
3
Share
Likes
30
Share
Bewässerung: 2000 ml jeden 2 Tag in der neunten Woche pH-Wert: 6,4 EC-Wert: 2 mS/cm Temperatur: 30ºC Luftfeuchtigkeit: 65% Schädlingsbekämpfung: im Moment haben wir keine Anzeichen das es was zu bekämpfen gibt, sobald die ersten Anzeichen da sind werden wir handeln :), aber zur Sicherheit haben wir wieder ein paar Raubmilben an die Pflanzen gehenkt. PPFD: 600 µmol/m²/s DLI: 38 mol/m²/Tag Düngemittel: Sie bekommt CalMag von BioBizz zu Prävention. Ab Tag 44 haben wir angefangen sie mit einem Mineralischen NPK Dünger (NPK 3,5-6-6) zu Gießen, Plagron wurde auch hinzugefügt. Besonderheiten: wir versuchen bei diesem Grow Effektive Mikroorganismen aus. -Tag 50 sie mag das man sie Pablito nennt, Pablito entwickelt sich gut und hat heute wieder Wasser mit Dünger bekommen ;) -Tag 52 Pablito hat heute Nematoden bekommen 😌 -Tag 54 Sie wurde heute mit mineralischen Dünger gegossen und jetzt ist Puck bei Pablito angesiedelt 😎 -Tag 56 wir haben ihr wieder etwas Dünger gegeben und den Runoff gemessen und er ist leicht erhöht 2.8 mS/cm 😱
Likes
7
Share
@uktuk
Follow
So far the plants look great, a little stretched out but seem healthy. They stretched a bit further than I would have liked before flipping to 12/12 but that's ok. The netting I ordered is too small so I will try and add some more sections with some string or something. Did some light defoliation, when the plants are healthy I like to defoliate pretty heavily and continuously throughout flower. The Autopot has been great so far, there's been a slightly concerning smell from the reservoir, but not alarming. ✨Thurs Sept 15✨ 6.4 ph 710 ppm 1410 EC Reservoir is starting to smell quite nasty. I added 5 Gallons to push it to the weekend then I will do a full clean. Plants are looking fantastic
Likes
25
Share
Hey hey hey Growmies 😘🤗🤩 Thanks for stopping in! I hope your week has rocked! 💪🏼So far so good over here! Today is day 49 for my set of G14s from 420Fastbuds and they are kickin ass! 🤩 The first plant was topped early on at 3 nodes and we also did some LST, we now have 4 beautiful main colas that are getting so thick!! This girl is smelling so so good and is really doing great! 💪🏼 The second plant pictured is the same age and was not topped. This girl we did LST early on and it is also doing very well and has a good smell! Both girls are receiving a few different types of bloom nutes and also cal mag. We did some more defoliation on day 47 so the bud sites are sure to get plenty of light! We’ve been using the spider lights and so far are very happy with them. 3 gallon pots that are super breathable. Like I said, so far so good 😊 We are leaving to FL soon for 10 days 😬 so hoping everything goes smoothly while we are gone. Any tips for that (leaving plants while on vacation) are welcome! Thanks for following along or stopping by! I’m here to learn and here to help if possible 😊 Check me out on Instagram @greengirl420mipotfarm or my Husbands at mi.pot.farm to see more of our grows 🤗🙃 And don’t forget.... puff, puff, passssss 💨 💨
Likes
55
Share
@Max1973
Follow
omg, another week has passed...... :) Day 100 - and then there was 11 Buds ....... lol Switched over to normal water on both ... smaller has been on water 1+ weeks ..... Endoscope arrives this week i hope..... harvested afew buds to fit it all in the tent and setup lights properly... trimmed em, wired em abit to support the weight of the buds.... I'll see how the endoscope results show, as to harvest...... i think growth slowed abit over last week or 2, because of poor light setup, not enough room in tent, and other grow 6400k led.... got a new tent on the way... 😎 Day 101 - Pics - edoscope, usb arrived... it's very good, but hard to stabalize / focus, i'll have to work out how to use it better...... the pics i posted were of a younger bud from the bottom..... i'm happy with the cloudy with amber, and harvesting.... 😎 Day 103 - vid of all trimmed and drying out upside down in tent. Day 105 - pics vids of drying and into curing.... i'll list all the test buds and buds i trimmed in the final harvest report.....😎
Likes
4
Share
I have my Electric Sky 180v2 now in instead of the cheap 40$ for 4 lights i bought on facebook. Which were growing but nothing like this thing has been doing the past week. Im still blown away by the light but back to the plants. Doimg great i took some clones. First time ever so hopefully they root. I been sprayin em 4 -6 times a day. My 3rd g6jetfuel i took out of my tent with es180v2 and put in closet by itself with the 40$ cheap leds. It hasnt grown a whole lot compared to the tent plants g61 and 2...i thought maybe it may of had a male or hermi part but honestly i dont think it did bc i cant find it now. But its still in there bc i decided to throw it on 12-12 in closet to find out sex forsure. Ive been foliar spraying in my tent 3 timez a day. And 2 times a week i get 2 little drops of fox farm grow bif in my 10oz spray bottle of water.
Likes
7
Share
Had to highjack this old diary sick hope this all goes well done this 3 times now lol with a degree of success lol well I would like to thank greenhouse seed co and Andy for the chance of growing these new genetics and there very own feeding line more pics due ignore next 5 weeks until I'm there lol
Likes
31
Share
Hi Cannafam, its all about the microbes! Brewed a tea for 24hrs, of the soil activator 2.6g, fresh organic kefir 100g, EM1 4ml, aquaponics microbes (fresh semi solid fish waste) 100g. and molasses at a rate of 20g per gal. or 5g per Litre. Once brewed add yucca at a rate of 1ml per gal, then use as a foliar spray and root drench. Just thinking I should have added some worm castings to the mix as well. That's next for next week I guess.
Likes
34
Share
@AshBrand
Follow
Welcome! In this grow we have: 2x Platinum Wedding Crasher 2x Gelato 41 1x Sour OG 2x Lemon Kush Germination/Rooting - 14 Days 9/17/21 - The clones look good in solo cups of soil. We will transplant into 5 gallon pots in the grow tent after they fully root in the cups. 9/18/21 - Looks like the clones are doing well in soil! We are so excited to grow these out. The clones came from a very highly respected grower. 9/19/21 - No ugly growth. All clones look amazing! We upgraded the light to a Mars TSW 2000. 9/20/21 - They are looking good and most likely rooting throughout the cups. I’ll give them a little bit of water today. I want the roots to go looking for the water so I’ve kept them slightly dry. 9/21/21 - They look happy. I will let them just do their thing… We are waiting on our Mars TSW 2000 light to show up anyways. No roots visible from the drainage holes in the cups. 9/22/21 - Looking really healthy and growing nicely. I’m excited for them to fully root in the cups so we can transplant them into the tent. The Mars TSW 2000 should be here in the next few days. 9/23/21 - Looking so good! We can’t wait to get these under the Mars TSW 2000 in the tent. They smell and look great. 9/24/21 - The clones look really good except for one Sour OG. It wilted and died, roots did not take unfortunately. I have a Lemon Kush started from seed we will grow in place of the dead Sour OG. Today we got our Mars Hydro TSW 2000 light. We will be hanging it and updating with pics/videos. 9/25/21 - They look amazing. Lots of growth while rooting. 9/26/21 - So far so good. Watering when the cups get light in weight. In just a few days we will be transplanting. See the video for today, we hung the Mars Hydro TSW 2000! 9/27/21 - Watered them yesterday, they look healthy. The Lemon Kush isn’t a clone, it is from seed. It’s the smallest girl but it’ll perk up quickly. 9/28/21 - Transplant day!! The clones are looking really good and it’s time to transplant into the 4x4 under that Mars Hydro TSW 2000 at 50% intensity. Check out the pictures and videos from today!
Likes
3
Share
@Muxa752
Follow
Цветение скучная пора, ну оно и к лучшему , походу дела гров получится. без серьезных ошибок) шишки набираю вес . пытался рассмотреть трихомы , получилось не очень , вроде уже мутные . но спешить не будем . удобы убрал вообще , побольше промою водичкой . напомню , все делается без измерений PH. на видео показан состояние грунта , корневая развита , аэрации помогают мелкие существа )
Likes
20
Share
2024-09-07 Girls showing up, now they will need time to establish, before going to grow vigour "BE a Breeder", is one of Doctor´s Choices Motto. Regular Seeds Seeds germinate- A backcross from Chronic Ryder_ BREEDER INFO LEGEND We’re so proud of our latest drop - Chronic Ryder regular - as it results from a hardworking breeding process. We used an original Chronic male plant from Serious Seeds and backcrossed it with our Chronic Ryder from Sasha The Joint Doctor’s private collection to receive the Chronic Fast F1 BX Regular. By crossing 2 Chronic Ryder F3 lines, L1 and L2 from the same parents, we have created a new hybrid line. Well, it seems like it should be an F4 hybrid, but it's incorrect to name so. This process is called interline breeding, which means the cross of 2 lines. This cross allowed us, over several generations, to get a fully automatic Chronic Ryder that predominates its parents by 25% in key characteristics. Chronic Ryder is also available in feminized variety. GROWING Chronic Ryder regular shows the best performance of parents’ heritage. It grows into a uniform and compact plant that rarely exceeds 1m in height. Thanks to its compact size it is better grown in small spaces, terraces, and balconies and is quite suitable for stealth growing. The plant forms a single huge central bud cola with few side branches. Fatty and frosty buds will be ready to harvest in 70-75 days from germination. You’ll be truly surprised how big and dense buds are - the nice and fruity smell adds extra pleasure. The short growing period and strong resistance are other strong points of the strain. Chronic Ryder regular would be a great choice for growing outdoors with short summers - you’ll get your guaranteed high-quality yield in any case. Be ready to harvest up to 500 g/m2 indoors and 50-100 g per plant outdoors. TASTE and EFFECT Chronic Ryder regular has a nice taste - fruity and citrus tones complement one another, giving an unforgettable aftertaste. The effect is mild and doesn’t hit you like a hammer - the perfect choice for novice smokers. It brings balanced high and stone effects. Thanks to it, Chronic Ryder is a good smoke that calms your body, giving a strong body relaxation for a long time. CHARACTERISTICS Autoflowering: Yes Type: Regular | Autoflowering Room: Indoor | Outdoor | Greenhouse Genotype: Hybrid Genetics: (Serious Seeds) Chronic BX Chronic Ryder Finish time: 70-75 days from seed Indoor: Productivity: 500 g/m2 Height: 60 - 80 cm Outdoor: Productivity: 50-100 g/plant Height: 60 - 80 cm THC: High Flavour: Citrus | fruity | apricot Effect: Balanced high and stone | daytime | giggly
Likes
19
Share
Buds getting really thick. Turning a sweet color. No trouble growing this one. Very nice plant.
Likes
14
Share
Привет садоводы вот и заканчивается история с Strawberry Chemdawg OG я остался очень доволен , мне понравилось какой она выросла очень хорошая генетика очень плотные цветы, легкий маникюр,очень сладкий запах Красавица опять выросла Благодарность SSSC за предоставленный генетический материал { Ребята вы супер ! } И благодарность всем, кто следил за этой историей !