. 🌱 : test harvest on day 86, 40,3g, day 88 44,5g, day 90 54g, day 92, 60,6g, day 93 22,4g, final harvest on day 96 562,7g 💧 : 💡 : 🤔 :

Unfortunately I spotted one bud with bud rot on my gelato plant. I flushed it on day 91 of cycle, day 54 of flowering. Today is day 94 and it seems it has not spread out to any other buds(happy days) .. I am watching it closely everyday and also to see how the trichomes are going.. breeder says 65-70 flowering days to be ready.. let’s see.. if I spot another bud rot I will probably harvest it.. I hope that will not happen.. let’s go

Anesia blackberry moonrock and imperium X will be put in the 100X100X180 with the TS-1000 so they can veg some more the black berry moonrock is looking very short stocky and bushy lest how she developed try the week Happy growings visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD 27/10/21 Transplant the black berry moonrock in 11L fabric pots added 5gram Easy Roots - Mycorrhiza Mix to soil Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Todo bien, entrando de lleno en la segunda semana. Hasta el momento solo seguimos con micorrizas del colectivo científico y agua semana por medio

Hi buddies im back to the diary Everything is going well, the girls drink a lot 3 to 5 liters of feed per day, the Ph and EC remain stable. I see new roots and buds continue to bloom💣 so I think they are fine and healthy. Sensi Seeds indicates Skunk#1 with 8 weeks flowering now i am at the beginning of week 7 bloom but I still don't see milky or amber trichomes and not even so many brown pistils, so i will repeat the week 5 feed as AN advice... maybe from the next one I'll start with overdrive .. who knows? 😁 I made some macro videos of the trichomes, in the next few days I will update the diary with photos. Thanks for the answers and advices to the grow questions, I know you don't do it for the free seeds, its only love 💚😜 love you too buddies as usual thanks for stopping by and good growth everyone !! Update: I need a tripod to take better macro shoots. Sorry for low quality pics

* Day 43- watered with recharge. And sprayed with neem oil + half a teaspoon of dish soap. As a preventative measure to pests and pm. Will give another spray of this the day I flip to 12/12. Also changed light cycle to 18/6. Will flip to 12/12 on day 49. * Day 44 defoliate lower part of all plants. Continued with more lst by pulling down the tops. * Day 49 got it’s last spray before switching to 12/12.

Today marks the second week of flowering, and I’m really excited about how well my cannabis plant is doing! Over the past few days, it’s really stretched out and has grown quite a bit taller. The leaves are looking lush and vibrant, with a deep green color that shows how healthy the plant is. I was a bit worried last week because the leaves were slightly droopy, but after adjusting the water and getting the levels just right, it’s looking much better now. It feels like the plant has responded really well to the care I’ve been giving it. I’m looking forward to seeing how it continues to develop in the next weeks. The buds are starting to form, and I can’t wait to see them fill out. This is such an exciting process, and I’m really hopeful that everything will keep going smoothly from here on. Fingers crossed for a successful grow!💚🌱

Going off what other people say about 2x-3x growth during the preflower stretch I decided it's time to flip!

alot of tie and bend (LST) to promote more inner growth and new nodes

More details and photos are coming when all buds are dried in about 6-7 days00

🤤🤤🙏🙏🙏🙏🔥🔥🔥🔥🔥

It's been another easy week in the Fastbuds tent. I've spent most my energy preparing my outdoor grow space for a wild summer. At this point, there's not much I can do except water and watch my plants grow. I've added videos of other plants in relations to the mimosa cake just for visual aid. I also added a photo of my cheese auto.. it's still drying! With the Mimosa cake auto I've been taking fan leaves off slowly for weeks now. This is a very busy plant. She is also going to run later than I expected. She's on day 76 and I suspect 95 to 100 days to finish time. I'll have to keel feeding her bloom nutes for the next few weeks; her 3 gallon bucket ran out of nutrients already. Feeding schedule: water, feed, water, feed Step 1- I'll take an aeration stone and use it to remove the chlorine residual in the water... this only takes 8 - 12 hours depending on water temperature. (I'm a water treatment process operator, I have checked several times in the past with my own Cl2 meters). Step 2 - add Calmag Step 3- add bloom nutes Final step - pH the water accordingly (very important that this is final step) A TDS residual of 500 ppm equals roughly 1 E.C. (I just double it)

Vamos familia actualizamos la cosecha de las kritical. La verdad que el secado muy bien 7 días en Malla y a los botes, 40% humedad y 24 grados es la temperatura ambiental que han tenido en el secado. Por lo demás de miedo os la recomiendo. Gracias a Agrobeta y Mars hydro , sin ellos este proyecto no sería igual 🙏. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Buenos humos.

First week of flower not much to do, defoliate few leaves and leave the plant to do its thing. As far as training most of it is already done now so just letting plant stretch up and get some decent height.

Week 21 (30-11 to ?????) 30-11 Today i harvested her! I removed all the fan leaves and left the buds on the branches to dry. 1-12 Temperature: 16°c to 19.5°c Humidity: 50% to 56% 2-12 Temperature: 14.7°c to 18.5°c Humidity: 54% to 57% 3-12 Temperature: 16.1°c to 18.9°c Humidity: 54% to 59% 4-12 Temperature: 15.5°c to 17.5°c Humidity: 57% to 62% 5-12 Temperature: 15.2°c to 17.7°c Humidity: 60% to 71% 6-12 Temperature: 16.5°c to 17.8°c Humidity: 60% to 66% 7-12 Temperature: 16.4°c to 17.9°c Humidity: 57% to 63% 8-12 Temperature: 16.6°c to 18.5°c Humidity: 56% to 60% 9-12 Temperature: 16.9°c to 19°c Humidity: 57% to 62% 10-12 Temperature: 17.4°c to 19.5°c Humidity: 60% to 64% 12-12 Temperature: 17.9°c to 20.1°c Humidity: 61% to 76% 14-12 The buds felt dry enough and ready to get their final trim before they go into the jar for curing! Trimjail it is! 16-12 Today i finished trimming everything. This is the end result: Dried bud: 116 grams. Dried trim: 23 grams. Thats over 1 gram per watt, and i am very happy with that!! In the curing jar they go! Let me know if you liked my diary and see you all in the next one!