I'm so excited I have a purple phenotype! I've wanted one for the past year 💜 The flowers are coming along - putting that carbon filter to use 😁 *I hope I'm not infringing on any rules about the music video. I'm very excited about a purple phenotype - I put some music on while updating my GD & this song started playing on YouTube autoplay. 🤣 I had to edit it & add it.*

IF YOU WATCH THE VIDEO YOU CAN SEE THAT I MOVED THE LAST AUTOFLOWERS INTO THIS 5X5 TENT, AND MOVED THE PHOTOPERIODS INTO THE 8X8 TENT. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Ok week 6. So putting my eyes to the plants and found out that, we have 1 confirmed female. I named her "Shiori"! There is one unknown sexed plant and three (mostly) confirmed males. Shiori was the one I wanted to be female due to her indica leaning leaves. I will take some cuts of Shiori before I flip. Sunday update... I decided to put these plants in the flower tent with their sister (Falda) who will be harvested in a few weeks. Depending on which male shows some vigor, I might keep his pollen to possibly create f2's to pollinate three females (Bratz, Falda and Shiori) Wish I could document all the grows I have going on right now but it's alot. Sunday update: I decided to move the five plants into one of my flower tents. Shiori was cut for clones (4), the rest weren't cloned because of assumptions of 3 males and 1 unknown still. Another AC infinity oscillating fan was added to the tent they are in. More updates soon.

It has been a good week. The SQ is fattening and getting covered in ice! She is also loosing most of the lower leaves. Now after two weeks of stretch it seems like she stopped ascending. I can't wait to see how this coming week will go! Btw, she got this weird stuff on one of the leaves stems, and only on that one. Does anyone know what that is?

This is the story of two Siamese Fat Bananas. The two little ones were born by magic from the love of the TegridyCal growers, the pot had reversed in the car, it had been filled at random and the seed replanted and of course two came out. Today, after a few days in the same jar, they were separated from the doctors of TegridyCal and the operation was perfectly successful. Prognosis 4 months and the big banana buds are ready

Another excellent easy to grow strain. Early on she developed what appeared to be rust spots on the bottom half fan leaves. I implemented calmag into her feeding. It didn't appear to reverse the impact but did delay it or slow it down. Not to mention the last month she and the others have been neglected due to my schedule. She has been very resilient throughout. She is in the drying phase currently so I will definitely update when I take her for a test drive.

She got some purp

Today (49 day) heavy defoliation, few days ago add 0.5 ml/L PK additive. Plant height is 140 cm now! See videos

Purple haze auto begin flowering a week later after the group went to 12/12. She just started drinking a half gallon a day. She has also stretched above the rest of the plants!

Día 20 (13/05) Todas las plantas muestran las preflores! Día 21 (14/05) Baño de sol de 2 horas! Día 22 (15/05) N/A Día 23 (16/05) Riego 750 ml H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + Startbooster 0,25 ml/l - pH 6.2 Día 24 (17/05) Las plantas salen al exterior! 😍 Les aplico heno como mulch (acolchado) Día 25 (18/05) Riego 250 ml solo agua todas las plantas Día 26 (19/05) Banana Purple Punch Auto está sedienta! Riego con 750 ml H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + Startbooster 0,25 ml/l + TopBooster 0,2 ml/l- pH 6.2 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

Oh boy my first ever harvest is making its way💜💚 Day 61: So these girls have been fattening their budsites and #3 isnt mad about how close the light is😅 these plants have really strong resistance and amazing genetics 🔥 On that note highly recommend Fastbuds seeds. First ever grow and these seed did not let me down. Amazing frost, incredible resistance againts overfeed and high temp (also low). Plant #1 and #2 are further into flower than #3. 3 has still almost 90% white hairs and definitely non tris that are cloudy. 1 and 2 however have almost all hairs turned to beatiful dark orange🧡 They still have ways to go before harvest. Might start flushing soon. Day 63: Morning fellow growers 🌅 💜 Checked trichomes this morning with my quite annoying small ass 30x lens. Almost impossible to see them but by the looks of it, atleast on lower buds almost all of em al clear. So imo they have still time to get fat 😎 i think ill start flushing when i see cloudy tris on top buds atleast 90% and chop down when 75/25 cloud/amber. So far my first grow has gone very well all things considered! What to remeber to do for my cookies and runtz, is that i will keep the cannopy level so i dont have one 120cm plant and two 60cm plants😂 also i have doubts about my offbrand light. Prolly will see 2 harvests trough and see if both times i get skinny nugs i will switch it out😎 stay lifted💚 Day 66: harvest is getting closer but seems like trichomes are mostly glassy still. Been feeding normally but cut the gro out this week. So only calmabg bloom and micra. Ph round 6.1. It seems like buds wont get that much denser or wont do much anymore. Would love some opinions what to do at this point! Edit: since growquestions are bugging, decided to harvest 1 top from 2 plants. Just to see hows the high and some closer looks. Seems like i might be a day or two early for my liking but opinions and comments are appreciated 💚

Good week

OMG the smells are becoming so intense, from lemon to the sweet caramel mix with chilies and a touch of pine trees, i think i cant put in words what im smelling and were is taking my mind, but i can tel this, what an amazing combination of fragrances that are flying around The tricomes are shouting up as they become fatter and frostier, all cristal clear so far, i think i still have 3 mb 4 more weeks to harvest, lets see 😜 Just calculate my VPD and it’s 0.98 kPa need to increase this up to 1.2 for now s i’m moving my ligth up a bit and see if it works 🙏🤓🙏 Thank you all for following, comment, like and all 🙏 100 likes 😅🙏 🙌🙌🙌🙌🙌🙌🙌🙌 ❤️❤️❤️❤️ Loving this LED Tec 😍 Girls: 1-BlueBerry 2-Alaskan Purple 3-Poyote Gorilla 4-Hindu Kush 5-Whitw Mango 6-Super Glue 7-Badazz Cookies 8-S.A.D. tent -8x8 / 2.4x2.4 but i'm only using 1/2 so 4x4 / 1.2x1.2 Led - Lumatek 465w Compact Pro at 100% All i Grow is medicine for myself, Stay safe, stay tuned and B Happy Peace out D

-Day85 watering 4 liter with calmag 1ml/L - Dry KoolBloom 0,39gr/L Total 300 ppm Ph 6,3 -Day87 watering 5 liter with calmag 2ml/L - Total 400 ppm Ph 6,3 (Drain 1,1 Liter 550 ppm) -Day89 watering 5 liter with organic bloom 2ml/L - Finalpart 4ml/L - Nirvana 4ml/L- Total 1150 ppm Ph 6,3 (Drain 0,9 Liter 600 ppm)

Thanks for stopping by.. Please hit the like button if you like what you see and ill be sure to check you out too Growmies 🌱 Week 4 of flower that week were things are starting to look gooood, i really hope the stretching has stopped because as you can see they are over 5 foot now absolutely insane 🤣🌱 I must say these Royal Queen seeds are on another level and a have been rapid all the way through… can’t wait to try there more dominant Indica strains, Just added a Co2 Bag and wacked the FC3000 up to 100% Temps around 24-28 ✅ Humidity around 50-70 ❌ Struggling a bit to keep the humidity down so will add a small dehumidifier this week, Need to lose alot of foliage but dont want to shock to much as this stage so just removing where essential, But overall happy how things are moving 👍

Too much darky? Stop nitrogen for a while....

Throughout the week, I give compost tea, and fermented plant juice once each ^^ Hope you guys have a wonderful day today ^^v *** Please Like, comment & share *** Highly appreciated -----/-----<@

The week ends Sunday Mar-1, being day 61 of flowering since flipping the light. From first pistils shown, it's day 45 which is a more accurate snapshot of where the plants actually are in their maturity. The buds development is progressing albeit slowly and trichomes are still clear across the canopy with lots of frost on the sugar leaves. The buds have beautiful structure and quite fluffy. Swelling has started on some calyxes. Light is maintained at 30cm above the canopy, with single daily fertigation at lights on - watering 3L per day. Fertigation pH target is 5.9-6.2 whilst flowering. Stopped the practice of fertigating at lights off due to the springtales infestation. Need to allow at least 2-4hrs of lights on period after fertigation. The coco is not dry but still damp on the surface after 24hrs from fertigation. Trying to maintaining an average RH in the space at 50% but it's getting harder now with all flowers. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The grow setup includes; - Secret Jardin DS120W tent (120cm x 60cm x 180cm) placed inside the bedroom. Passive & active intake of air is from a closed off section of the room where the central heating boiler sits - the intake is warm air (20 degC.) and fairly dry (40% RH) during the winter months. - Mars Hydro SP250 LED light - extraction fan - AC Infinity Cloudline T6 - ventilation fans - aquarium heater - small oil heater - small dehumidifier - 20L Airpots and 3.5L general pots for seedling stage - Canna Coco substrate and nutrients - GHE Flora trio nutrients - pH and EC/TDS meters - 2x Govee Thermo/Hygro meters (one at canopy the other at the roots level)