~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~ 🌱💡😽💨 Awesome week!! These plants are definitely my favorite of the bunch. I love the shape and node spacing. I think these will be the highest yielding.. bud sites are forming fast and they're praying to the Solux most of the time.. we raised the light a few more inches..the tops of one of the kush is getting bleached.. this may be due to our calmag shortage too..we ordered more and plan to hit them all with a full dose when it arrives.. We still have the Solux at 75% power and this seems to be more than adequate for now..we'll turn it up to 100% a little later in flower..not too much else to report, awesome lighting and forgiving plants make for easy weeks.. thanks as always for dropping by and happy harvests everyone!!🤘🐱❤️🌱 ⚡Hortibloom/Solux 350⚡ Specifications ⚙️: Diodes: Samsung LM281 Pro / Osram DR (1,440 total)💡 Driver: Inventronics 350 watt🔌 PPF: 1015 μmol/s ☢️ PPE: 2.9 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 14.3lbs lbs (6.5kg) Veg Coverage: 5 x 5 ft 🌱 Flowering Coverage: 4 x 4 ft 🌼 -Uses an aluminum heatsink (no fan), quiet while operating 👂⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 -May be daisy-chained via RJ14 and managed from a single controller 💡~💡~💡~💡~💡 🌎 https://hortibloom.com/products/solux-350-led-grow-light ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

It’s growing really well and tall,I forgot to topping the plant but it’s okay

My pictures seem to have re organized themselves, just give me a few here and I'll get the full rundown . So this week ( day 21-23) was MAJOR defoliating. What my first step is to start taking the largest fan leaves . My next step is about halfway through the canopy I'll stop and then I'll start working on the very bottom of the plant now at this stage in the game anything that doesn't even have a nice Bud site so a nice white hair sticking bud at the very bottom like shoots I'll just cut them right off. This is the first steps of a main line but I don't complete the actual full main line I probably will try it sometime soon just not this time. So you take off anything that is a small shoot coming off the main stems and then your next step is . STOP. It might be a minute it might be 10 minutes, 20 min , it might be an hour or more ( my tip is don't wait a full day I try and do it within the first 12 hours of starting it) but I always stop just to look at what I've done sometimes if you get going too quickly you can end up doing way too much. Stand to talk to canopy and look what sites are getting hit by light what places are these families beneficial to use for photosynthesis. Anything that is not doing as much good will be taken off and at that point I'll probably do another you know 5-10 minutes of defoliation maybe take one or two more shoots at the bottom to ensure what's left there is a huge fat cola that's going to give you those huge buds . After this you're going to want to do your best to support those stems that are going to hold a lot more weight as if the plant would have been with all the shoots so you're going to want to just make sure that you have staking in place or some sort of support system to keep them from flopping over a breaking them in the future because that's one thing yeah it's great but then it'll get to a point where oh no stuff falling over and then it's just more hassle than it is helpful. I got alot more pictures to follow this week so stay tuned !!!

November 16th, 47 days post flip. Plants continue to fatten and have put on some really noticeable weight in the last week. By the looks of things I’m expecting around 10 more days of fattening and than a week or two of ripening before harvest. I will do my final defoliation around mid week this week. Shooting for day 49 or 50. At this point will not be providing anything but water. I still am not seeing any fade so I think she has plenty of what she needs. I did get a chance to add those two smaller fans I wanted to add. This has dropped my temperatures from 82 to 77. This drop should hopefully help preserve terpenes and help prevent mold. The airflow will also help prevent mold. Plant 1(Cherry Chunks): The frost on this one is insane. I also get why they call it cherry chunks, it’s terpenes profile is starting to come through and it is tart in nature; its structure is also very chunk like. Much lighter green compared to the two purple marmalades Plant 2(Purple Marmalade): The resin on this thing has been insane since the very start of flowering. Smells of tropical fruits and guava really looking forward to this one Plant 3(Purple Marmalade): Smells on this one are finally starting to take off, it slept for awhile as far as the smell department went. It is starting to take on a sweet gassy funk kind of smell. Possibly lavender and gas? I’ll have a better idea come next week. The density on these nugs are also insane, look like they are going to explode any second. Purple Marmalade Clones: Growing very well, needs a good defoliation here soon and maybe some craft blend. As always guys thank you so much for following along and God bless!

During week 8 I accidentally snapped one of the branches whiles defoliating. It was a clean break but nearly snapped clean off. I have managed to prop and strap it up so hopefully with a bit of care she can hold on. It’s now been 5 days since it snapped and seems to still look healthy so keeping my finger crossed🤞 Other than that this girl seems to be coming on really well. She has a lot of bud sites and seems to been taking nicely to my DIY aero/hydroponic system. I’m really pleased with how she has turned out for my first ever grow and I’m looking forward to see her at harvest! Happy Growing!🌱😎

1/22 Week 4! Folded in some CalMag temporarily for a slight def showing up in Jool, foliar of same on all. Recovering nicely from topping will decide on 2cd later Jool recovered her normal color in just a few hours after feedings. Can pull the Cal-Mag for a while. Thought of increasing nuets a tad to 10ml but no need to rush just may have to hit them with Cal-Mag once in a while. Time to hit the roots again 10ml/gal Kangaroots one feed only 1/25 Leaving in a small amount - 2ml/gal - of Cal-Mag with CocoTek more for peace of mind than anything else Keeping them small till I have a place to flower then... then we pour it on. 1/27 Continuing to walk the line between keeping them healthy and keeping the size down - working ok so far Growing nicely although some concern found on Zhaan, feeding pattern on just the two tops shown, no where else. Nothing seen , sticky trap put up will check often for further. Not grabbing the Soap just yet see if anything else pokes up 1/28 Sticky trap clean so no flying critters Think hes right about strange leaves but I want to add I may have done some of this during topping. Just from what I see Bit of a conundrum the plants are near-ish to the size we wanted to flower them at BUT there is no room at the Inn, (sativas...) so we have one path to getting this done. Keeping them as small as we can without risking defs for another week then beginning the flowering in the veg tent Moya while the sativa finishes in 2 weeks. Thats one week of flower in the small tent at best, not sure about that. I swear two tents and one is a 4x4 and still space problems... good to have that problem too 😃 That's the plan but we know there is about a ton of crap that will go wrong like that sativa taking longer. Re-eval in a week Feeding remains as before 1/29 Pic and vid to end week no further issues and the tent is now full. Good problem to have but its convinced us that flowering in Moya is problematic Raised lights to 24" to see if they will go up instead of out for a while. Defol the bottom end of the plants just a bit in attempt to encourage some vertical growth with that as well.

Day 14. Supercropped the top, holding it down with a paperclip. Day 18. Continuing with lst and hst. Happy with the progress. Day 19. Minor defoliation in the morning.

Let's go to the finale. The eighth and final week of flowering. The flowers are hard as a rock. The trichomes are milky and sometimes an amber hue appears.

Small pot Do-si-Dos is struggling, she needs extra feeding each week. Buds are a bit smaller than expected, but they are frosty and sticky and I can see that they're starting to take shape.

Just water. Was thinking g of taking it down this weekend but some suggest it needs more time.

Coming to the end of week 2 more photos to up loaded!! New lighting system ended up getting 2 3500k and 2 6500k cobs . Can tell my plants are already loving them fastest growth rate I've seen since my first grow !! Gg4 and 3 are looking fucking amazing 7 outta 8 in solo cups looking good Caramella never cracked kinda pissed but it's whatever ! I have one forgotten cookie by metophstic limited edition soaking so let's see :) . Temps between 77 n 85v Humidity 70 80% 24 hours on Water every 5 to 7 days using a one gal Solo cups get small amounts So far so good :)! Further along updated at the start of week 3.

35 dias de actividad en el indoor, foto periodo de 20 horas de luz y 4 de oscuridad

Here we goooo! Etsy seeds here we come. So far have been happy with them.

This girl is growing so healthy and lovely. I am just loving her every day so far no complaints. I may have to change the pot size soon.

This week I alternated watering from plain RO and RO plus calmag. Clones are showing roots and I will transplant into solo cups tomorrow. Trellis net for flowering tent is set up. Just a waiting game now :)

W17 (22-5 to 28-5) 28-5 The plants are slowly dying so i decided to chop them tomorrow and throw the buds in the freezer to make some bubble hash in the future.

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

For 30th April: The aroma in the tent is ramping up. It is pure correlation, but it seemed to have increased as soon as the UV light was installed. The white widows all have a delicate perfumed lemon mango smell. The gorilla glue is spice and pine. Ph is good at 6-7 in all four pots. Still fighting the deficiencies in one of the widows. The brown spots didn’t seem to slow down my last widow grow. But it also has very pointy leaves, where the other two younger widows have fat dark leaves. She’s bigger, older and hungrier than the other two. She might just need more feed. I need to keep the calmag going. I have been sporadic with it but I’ll make it a regular feed addition from now on.