I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Strain: Divine Seeds – Auto Candy Grow Type: Indoor Pot Size: 7 Gallon Medium: Peat Moss & Perlite Nutrient Line: Athena (Bloom) Week 5 Update She’s doing really well this week, showing healthy growth and strong flower development. Her buds are looking impressive for week two of flower stacking up nicely already. She’s handling her feedings perfectly with no signs of deficiencies or stress. Everything’s on track, and I’m hoping she continues to bulk up and fill out like this in the coming weeks. Feeding 1.7 L Athena Bloom nutrient mix (will raise gradually if needed). Indoor Climate Conditions Temperature: 18–23°C Humidity: 60–65% VPD: ~0.5–0.8 kPa See y’all next week!

Die Ladys wachsen gut ich bin sehr zufrieden mit Livingsoil bisher geb ich nur Wasser Es sind natürlich zu viele Pflanzen für das Zelt aber ich wollte einmal die Grenzen austesten mit 9 wäre es um Welten besser 😆

A few of the autos have mostly milky trichomes but no amber yet. Maybe another two weeks.

Guava Runtz – Week 6 (Fast Buds Outdoor 2026) The weather remained good. Guava Runtz is getting a lot of sunshine and consistent nutrients. She has stayed compact and is now around 22 cm tall. The plant has a healthy green color and solid structure. Steady growth so far.

Antecipado em 1 semana pois não tenho mais como esperar. Bom resultado para plantas que revegetaram... Agora e paciência na secagem.

Northern lights is looking good. She is growing very vigorously. She has had great growth over the last week. She will be going to her flowering tent in about a week. Everything is going great. Thank you Divine Seeds, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Day 85. Plants are flying !!! Wonderful frost, structure, health - pure joy !!! Lights are tied to the sealing and I can't drop intensity, photos are crap, plants are way better ! Last week they got bacterial feed and BioBizz without BioGrow, this week is full blast : Next watering - max pk boost , will push first watering without N and hope to bump 800 ppm , next will be last BioGrow use and 1500 ppm maybe ;))) Hope they won't burn ! I see some bottom leaves decoration and think they could eat MORE ;)))) Btw they STINK, heavily ;))))))) P.S. I am a stoner !!! At the begining of naming A was a taller plant, now last week and this I called them WRONG ;) will follow current lay out. A is smaller plant, B will be taller one. Happy Growing !!!

RS11 x Banana OG - Barney's Farm x Doja Day 105 - watered with 2L of RO tap water with nutrients listed above mixed in order, and ph'd to 6.3. I'm not too sure about this one, there were a few issues with her during veg and now that we're more than half way through her flowering cycle, I would have expected her buds to have bulked up a lot more - her pistils have started to show signs of maturity, so I don't expect her to bulk up much more... Maybe it's the genetics, maybe Im just unlucky here, but I have a feeling the yield will be extremely small with this one... Which is a shame, because it smells so good!! She's close to harvest and there is enough room in the tent, so I'll finish her off, but under different circumstances, I would have removed her already and turned her into cannabutter... You win some, you lose some...

soo one was way more photogenic than the other 😅 also I know I put a lot of videos but I'm obsessed with this strain ok? it's amazing and I'm proud of me😁😁 oh and how DOPE is the timelapse? 🤯🔥🔥🔥🔥

📆 Week 3, 20-26 May 2024 20 May - Increased light power to 60%. 21 May - Cut first 2 true branches off. 22-26 May - Observed and let the plant grow. 📑 I’ll always cut the the first true branches off any plant I grow. In my experience they just don’t keep up with the plants growth rate in general and only take away from it's overall potential. This plant seems to be very healthy and growing as expected, strong and fast. 🍶 20 May nutrient solution changed 🍽️ 20 May feeding schedule updated 💧 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient solution EC 1.7 at 72 degrees F 🔆 Light power at 60%, DLI 25 canopy coverage at 18hrs 😤 Using PYPABL, Air Pump, 400GPH That is it for this week. Thanks for the look, read and stopping by.

The green beast is growing very well so far and next with should get much bigger 👹

She's looking super beautiful after the stretch,she looks strong and ready for full flower let's see how this beautiful California girl performs! 💚 🌱 ✌️

9/18: New week...fed with Boomerang and Kangaroots 9/19: Applied Axiom harpin proteins and boomboom spray 9/20: Fed full strength TPS One...decent growth. The smaller one is less droopy now. 9/21: Tucked a few leaves and took some photos and a video. Looking good. Just a couple more days of 24/0... 9/22: Switched out the 560w of 5000k CCT lighting for 720w of 3000k CCT lighting and set the timer for 12/12. Decided against 13/11 with emerson effect...trying to save a few bucks on electricity. I'm keeping the lights at 30" from the tops for a day or two. 9/23: The girls loved their first night of sleep...so perky!

He tenido unos problemas esta semana. Una de las plantas no tiene orden jajaja. Al parecer sus ramas no están muy fuertes y se caen. Acá es donde me arrepiento de no haber usado scrog. Otras dos plantas están presentando un poco de amarillo en las puntas de las hojas y una que otra un poco quemado justo en la punta color amarilla. Por lo demás las veo bien, se hicieron un poco más gordas, pero no lo suficiente o lo que quisiera. Necesito incorporar co2 y scrog en el próximo cultivo. Espero resolver mis problemas y mejorarlas para la otra semana. Buenos humos

***Sponsored Grow*** = Medic || https://medicgrow.com || Grow = ***Sponsored Grow*** Still have some issues with the feed and this pineapple dream, they are getting some burning in the sides on some of the larger fan leaves, I would say it could have been over feeding but the runoff is not that bad, and I would expect more burning on the other plants as well. Its smell has changed a bit as well, its not as fruity as it was earlier on or its diluted by all the other smells in the tent, might be a sign I am giving them to much water at a time as well. Still giving them a 2:1 or 2.5:1 grow vs bloom nutrient. Its helping with some of the pink stems from last week. Feeding strength is up .2 point to reach 900ppm or aorund 1.8EC will leave it here fro the remainder of Veg. Prob will do for 2 more weeks then flip to flower as I just topped them and want to give them some time to recover. NPK ratio of 7-7-14 1:1 equal parts grow/bloom. Grow=8-4-15 Bloom=6-10-14 Boost=1-15-30 "not yet used it yet" Also took some clones from the plants as well, took two main cuttings from each plant, forgot to do the one so its not shown in the first video up the updated clone pics later in the week. If any of these impress me then the clones will go outside and grow there all year for a extra special harvest. Or I'll give them out to some friends and family maybe a little gorilla gardening project, but I will wait before getting ride of them all as I'm still kicking my self in the ass over the Blue Cindy loss. really liked that plant and wish its clones I gave out where still aorund. Lights doing well. The V1 spectrum is good on the medic grow mini sun-2's 240w. No issues so far, dimmed at 80% till flower is initiated then up to 100%, Will test out 13/11 I think as the schedule to give them some more photons for an extra hour vs 12/12 . Till next week. ***Sponsored Grow*** Official Website: https://medicgrow.com/ + https://www.kannabia.com/en Facebook: https://www.facebook.com/medicgrowled + https://www.facebook.com/kannabiaseed/ Twitter: https://twitter.com/medicgrow + https://twitter.com/kannabiaseeds Instagram: https://www.instagram.com/medicgrow420/ + https://www.instagram.com/kannabiaseedsint YouTube: https://www.youtube.com/channel/UCNmiY4F9z94u-8eGj7R1CSQ + https://www.youtube.com/c/KannabiaSeedCompany Growdiaries: https://growdiaries.com/grower/medicgrowled https://growdiaries.com/grow-lights/medic-grow + https://growdiaries.com/grower/kannabia https://growdiaries.com/seedbank/kannabia

Flower Week 5