Half way through week 2, started LST on a few & topped a few, just trying different things right now! If anyone has any pointers or sees anything I should change leave a comment!

******************************************** Week 9 flowering (flower week 3) ******************************************** Light cycle=12/12 Light Power=180w 75% Extractor controller settings High temp= Day 26c, Night 20c Low temp= c Temp step=0c High Rh= Day 50%, Night 55% Low Rh= % Rh step=0% Speed max=10 Speed min=2 Smart controller settings (during lights on). Lights on=9.00am Top fan on=+22.5c Top fan off=-22.0c Dehumidifier on=+50% and -26c Dehumidifier off=-50% or +26c Smart controller settings (during lights off). Lights off=9.00pm Dehumidifier on=+55% and -20c Dehumidifier off=-55% or +20c VPD aim=0.6-1.6 DLI aim=30-45 EC aim=0.2-2.0 PH aim=6.0-6.5 NPK(14.3/7.2/25) 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= Autofeed 6 drippers. Feed=Flower Nutes. Neutralise=0.1ml/L Bloom=4.0ml/L Roots=0.2ml/L Silicon=1.0ml/L Calmag=0.5ml/L Boost=2.0ml/L Volume=12L Easy Ph down= 0.125ml/L Ec=1.75 PH=6.4/6.4 Runs=17 Run times=4min (276ml each) Gap times=16min Total runtime=68mins (5.0L each) Total flowrate= 138ml/min (69ml/min each) Auto start time=10.00am Auto stop time=3.24pm 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 ******************************************** ******************************************** 📅14/7/24 Sunday (day 57, day 15 flower) 📋H=89cm D=20cm Dli=69.8 Ppfd=1616 12/12 Raised light. Lowered power to 180w H=89cm D=26cm Dli=44.5 Ppfd=1029 12/12 📅15/7/24 Monday (day 58, day 16 flower) 📋 it's getting warm again. 📅16/7/24 Tuesday (day 59, day 17 flower) 📋 Small defoliation lower growth. 💧 Method= automatic Feed=Nutes flower Volume=12L Ec=1.75 PH=6.4/6.4 Volume left=3.5L Volume used=8.5L (125ml/min) Volume each=4.25L (62.5ml/min) Runoff. Total runoff=0.2L Ec=2.6 PH=/6.4 Feed=manually @4.50pm Run time=4 mins Feed=manually @6.00pm Run time=4 mins Feed manually @7.00pm Run time=4mins. Volume left=1.5L Volume used=10.5L (142ml/min) Volume each=5.25L (71ml/min) Runoff. Extra runoff=0.35L Ec=3.0 PH=/6.5 💧 📅17/7/24 Wednesday (day 60, day 18 flower) 📋 H=98cm D=17cm Dli=70.8 Ppfd=1638 12/12 HST 📅18/7/24 Thursday (day 61, day 19 flower) 📋HST snapped a cola. Defoliation. 📅19/7/24 Friday (day 62, day 20 flower) 📋H=98cm D=22cm Dli=62.5 Ppfd=1446 12/12 Reduced power to 155w H=98cm D=22cm Dli=50.4 Ppfd=1168 12/12 Went away 💧 Method= automatic Feed=Nutes flower (next weeks feed) Volume=12L Ec=2.1 PH=6.7/6.8 Volume left=3L Volume used=9L (125ml/min) Volume each=4.5L (62.5ml/min) Runoff. Total runoff=0L Ec= PH=/ Feed=manually @4.30pm 1.5L Runoff. Extra runoff=2L Ec=4.3 PH=/5.9 💧 📅20/7/24 Saturday (day 63, day 21 flower) 📋 away ******************************************** Weekly roundup. 📋 she stretched a further 15cm this week and I had to apply Hst because of the limited height in the tent, the light is about 1cm away from the roof of the tent. Had a few accidents with the Hst. She's looking good. I was a bit rushed going away as its last minute so 🤞 my automated stuff works. Take it easy. Back soon. ********************************************

So far so good. Fattening up nicely, growth has been wicked up till this point. Only vegged her for 27 days. Pretty impressive growth. Hopefully she will be ready end of next week. Dropped the feeding back slightly, will be starting the flush soon. Stay tuned.

Hallo liebe Growfreunde 💞, Heute an BT 10 sieht alles super aus soweit, der stretch lässt noch auf sich warten🤔 malbsehen was noch kommt. Bin soweit sehr zufrieden, nur eng wird es langsam im Zelt 😅

Not bad not bad, by the looks of it she'll be a fatty but i just hope that she'll be ready at the same time as the others. What i want to know is how the bbc can predict when i want my harvest but can't predict when my fucking landlady will break in and faff about it my grow room, long story short 46 makes me 👺 anyways, boucing back from a scare nevermind mind her 46 is my focus lol oh my the things we do... enjoy ! 🚀 Induced resin production by dropping the lightschedule to 10/14 almost immediate effects were smelt, loud and clear : candy shop goodness ! this one is gonna be a sweet one ! 👊

Week twelve for Strawberry Zkittlez. This will be the last week for this lady – and we are super satisfied on how she performed in that 3l pot. Resin production is absolutely high level, lollipoping helped her a lot to focus on her remaining buds and she is really beautiful. Super nice one :)

Greetings to all, fellow gardeners! Welcome to Peaky's Enchanted Valley My little girls look great and are already full of glue A prosperous and high quality harvest is expected

Victory lap...week 13 is in the books. The girls are are just about done taking a beatdown. I came, i ve endured and over came, ive grown! Again, this was 12/12 courtesy to one photo followed by two auto pots. Unfortunately My photo( kalina asia)is a bit behind but will be pulled along with my autos (All gas Og auto& Banana Bread auto). They are 93 days from seed. I should've 84 and out the 🚪 them but whatever! I must of did something right!!! Right? Next stop the harvest...

They got a Magnesium deficiency and it was time to change the water and give them nutrients. The next day they showed a explosive growth. By the end of the week they should be Back on track. Nice. Its Day 21 and I decided to top 3/4. I give them one day to recover and going to do some LST

~ AirCube Active Oxygen Ebb/Flow System sponsored by GrowAce, featuring Tropicana Cookies by FastBuds ~ Well guy's and gal's here we go again on another exciting Autoflower run together! This time will be different as I will be doing a 'Hydroponic' run utilizing the AirCube Active Oxygen Ebb/Flow System by GrowAce, who were kind enough to sponsor me for this run, so it should be interesting to see what results I get and have some fun along the way! •Let me first tell you about this 6 Pot Ebb/Flow system from GrowAce: "The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system! With the AirCube's proprietary fabric pot in bucket design, this system is guaranteed to outgrow any other Ebb + Flow system on the market. The results speak for themselves- grow MASSIVE roots that result in MASSIVE fruits! Air Pruning- Air Pruning only happens with fabric pots. As the roots reach the fabric walls of the pot, they penetrate and grow into the breathable fabric. Once penetrated, the roots are exposed to air, which causes the tips of the root to dehydrate and naturally prune themselves. This natural pruning process forces the roots to grow tons of lateral fibrous feeder roots. This results in a plant that utilizes the entire root zone and fills the entire pot with tons of roots. These fibrous feeder roots are incredibly effective in uptaking water and nutrients, resulting in a plant that grows healthier and more vigorously! Oxygen Benefits- Without oxygen, nutrient absorption cannot occur. On a molecular level, oxygen is needed to transmit nutrients across the cell walls and into the roots of a plant. With the AirCube's proprietary bottom lifted draining design, the system actively draws all of the water out of the bucket pulls vital oxygen into the root zone. Maximum Versatility with Any Grow Medium: The AirCube System is the only system on the market that allows you to use any growing medium you like. Use coco coir, soil, peat moss, perlite, vermiculite, hydroton, rockwool or any other medium you wish! This system is the most versatile Ebb and Flow bucket system in today's hydroponics industry. Temperature Control- with the fabric pots constructed with highly porous polypropylene fabric, heat dissipates easily and effectively. Unlike standard plastic pots, heat isn't trapped in the root zone. Heat in standard plastic containers can reach temperatures of up to 125 degrees. When this type of heat is trapped and unable to escape, it can damage your plant's health and limit the potential of your harvest. Growing in the AirCube System, plant roots grow cooler, healthier, and more vigorous. Largest Pots in its Class- this system features 5 Gallon grow buckets, the largest pot size of any other ebb and flow hydroponic system in the market. Modular and Expandable- start with 6 grow buckets and expand up to 36 grow buckets with the optional 105 gallons PopTank reservoir!" For my medium and nutrients I decided to also switch things up from my regular Organic runs, going with Plagron Nutrients and Root Royale 70/30 Coco/Perlite. When filling the fabric pots with medium, I first added just under a gallon of horticulture perlite from Nor-Cal as a base layer to ensure good drainage and then filled the remainder with the Root Royale. •Now for the outstanding, award winning strain from my friends at FastBuds... Tropicana Cookies Auto: I'll be running Tropicana Cookies Autoflower which is a 60/40 Indica/Sativa Hybrid. "Tropicana Cookies Auto is the perfect variety for growers of all levels, especially beginners as this strain performs very well outdoors and indoors, and can produce up to 500 gr/m2 in 56-63 days without needing extra maintenance. Reaching up to 110 cm, this strain grows fairly tall with medium-sized branching, showing its mixed heritage. Definitely the right choice for those with a high tolerance looking to get their hands on the strongest autoflowers out there. You can expect an extremely powerful and long-lasting high that’ll boost your mood and give you that extra push you need to start your days on the right foot. This variety offers the whole range of citrus and woody flavors with a strong candy-sweet background that will keep you coming back for more and more."* *References: GrowAce.com, 2fast4buds.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •DL Wholesale Root Royale Coco Lite 70/30 coco/perlite •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 10/22- The Tropicana cookies are going into their third week of veg, and their fourth week since breaking ground. All three are looking great, with the #1 pheno having the darkest green coloration and super tight node spacing, and the #2 which is looking super healthy, with much wider node spacing. The #3's color is not yet where I'd like to see it, but it has been steadily improving over time. Their feedings of Plagron nutrients continue three times daily and I'm monitoring the reservoir before each, adjusting the nutrient level to 650-700ppm @ 5.9-6.2 ph. The tent environment has remained dialed in with the VPD averaging 1.40kpa over the last seven days. 10/24- Today I drained, cleaned and flushed the AirCube reservoir and 'brain bucket', then filled it with 70L of 74℉ well water. After filling I added the Plagron nutrients separately and also began adding in Plagron Royal Rush. The Tropicana Cookies are responding well to the feeding schedule, and are also tolerating the increased light output which I now have set to 80% along with setting the co2 levels to 1100-1400ppm. 10/26- The #1 pheno has some huge shade leaves that are blocking her side branches, and are an absolute bitch to keep tucked out of the way. I'm contemplating removing a few to allow the side branches more light so that they'll be able to grow out. Today I added 1/2 tsp. of Yucca Extract to the reservoir which will aid in feeding by acting as a surfactant, increasing the wetting ability of the solution. I am continuing the feedings of Plagron nutrients three times daily, and I'm monitoring the reservoir before each, adjusting the nutrient level to 650-700ppm @ 5.9-6.2 ph. The solution temperature is maintaining a steady 73-75℉. As a side note; as the weather gets colder I may install a heat mat, controlled by a thermostat, under the reservoir to ensure proper temp's in it. 10/28- There goes another week for the FastBuds Tropicana cookies and they're all shaping up to be beautiful cultivars, with some slight differences between them which makes the grow interesting! Our weather has warmed up the past couple of days. Because of this I've had to lower the light output to 55% in order to keep the tent temp's below 82℉. The Tropicana Cookies are showing zero sign of heat stress so I'm not terribly concerned, especially as the weather will be dramatically cooling off in a day or two. The #2 and #3 pheno's are showing signs of the beginning of flower, ans I went ahead and removed four of the huge shade leaves on the #1 as they were too big to tuck and blocked a ton of light from the side branches. Hopefully now the #1 will start to bush out with all the additional light reaching into the interior of the plant. I'm also continuing to tuck shade leaves daily on all three girls, and have been gently bending down their side branches as well. I upped the nutrient ppm level to 800 with the addition of Plagron's Royal Rush 8-0-0 which will continue in their feeding through flower. I'll also be adding Plagron Green Sensation in another 7-10 days which will also continue through flowering. I hope to see you next week... Growers Love!💚 💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow what you love, Love what you grow!💚

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

Novena semana de floración de 11 que van a llevar casi casi seguro todas. Fuah, todas parece que tienen una gelatina de tricomas por encima, espero que salgan riquisimas!

Waiting and waiting . Add more nutrients for bloom . Everything looks good ...i buy new box only 60x60 for veg phase . I cant wait 4 months 😀 so now every two monts i grow 4 plants . Next round mimosa orange punch and superboof from barney and maybe something for outdoor

Soaked in distilled water for 24 hours and planted in the ground In a few hours they were out. Watered every other day with 0,1 l

Día 34 (27/05) Riego con 750 ml H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + CaMg-Boost 0,25 ml/l + TopBooster 0,2 ml/l - pH 6.2 Día 35 (28/05) Riego 750 ml sólo H2O pH 6.2 Día 36 (29/05) Riego con 750 ml H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + TopBooster 0,2 ml/l - pH 6.2 ANDF es superdemandante de Magnesio. Como aún está en preflower, hago una aplicación foliar de sales de Epson a 4 g/L Día 37 (30/05) Riego 750 ml sólo H2O pH 6.2 ANDF está creciendo muchísimo! Una genética muy potente! Día 38 (31/05) Riego con 750 ml H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + CaMg-Boost 0,25 ml/I +TopBooster 0,2 ml/l - pH 6.2 Día 39 (01/06) Riego 750 ml sólo H2O pH 6.2 Día 40 (02/06) Riego con 750 ml de Té de Compost de Floración ANDF no para de crecer y demandar Magnesio! Le aplico 4 gr de Sales de Epsom como Top dress 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

The weather is colder than I expected, plant growth has slowed down :(

10-5-25 Apple fritter is doing good still has a few weeks left waiting for her to really thicken up and get heavyyyy.

It's been an alright week, I guess. I'm very concerned about the area around the stem split on UKBS 2, as there is a tan-brown area appearing near it. I'd be incredibly disappointed if I were to lose UKBS 2 as it's one of my most vigorous plants currently. In other news, the tent will be flipped to flower in a couple days after I water UKBS 1 and ensure there are no ongoing nutrient issues. Looking forward to seeing Carl's bud structure. 5/3/2021 - The split in UKBS 2 still has ambiguous effects. There seems to be issues appearing at the bases of other nodes. I have started spraying with 2% vinegar solution in case it's white mold, I'm not a fan of losing this one. In other news, the tent has been flipped; waiting on flowers.