The Grow Awards 2026 🏆
Processing
Likes
Comments
Share
@Cysolja
Follow
After trimming everything under the net she has focused on sprouting more upwards towards the light, stems are nice and thick and budsites are nice and even so will grow evenly when budding!
Processing
Likes
22
Share
Big durb is big bud good! Damn this girl is stacked!!! Immense buddage. Still short, but why am I complaining? Have you seen those buds??? Intense aroma of spicy clove, liquorice and a touch of haze. The colours are forever changing, the pistils darkening and twisting. Started the flush, she should be ready in 2 weeks! Love, the doctor
Processing
Likes
2
Share
Likes
3
Share
@WeedWagon
Follow
Day49: -cut away new lower nodes but keeper the fan leaves -watering 1l/every 2-3 days - LST correction every 1-2 days to keep an even canopy - one branch of top branches grows at a faster rate -looking healthy -Day56 switch to flower phase
Likes
269
Share
Day 129 Flower 67 Remaining 10?!? WOW! lol they keep plumping up. most have slowed down but some of the colas are still noticeably growing. The plant on the right is quite a bit different then the other two. much shorter and has different looking colas. much more rounded. Also this plant has lots of white hairs on the main colas. Is this a sign they are still growing? how come the other 2 only have a few white hairs and this one is loaded. another distinction is that this plant hasn't really started fading yet. it has a few purple leaves but doesnt have the fade like the other 2? weird? why this plant so different. I'm quite nervous still but its all good, its just because its foreign to me. most the trichs are clear but theres a growing number of milky ones and the odd amber one. this is for the top colas i've been watching. I'm stoked to see the harvest. theres 24 yo yos in there holding up these massive colas! The flush should be any day now. I'm still confused as to know when i'm a week out and to start the flush?!? I understand harvest is when mostly milky with a few clear and amber. I cant believe the crystals on these ladies. its absolutely insane! also sticky as all hell, amazing! I'm very excited, the big day is coming up very quick Thanks again for following along and helping to make this grow what it is, let finish strong! 👌👊👊
Likes
11
Share
@BruWeed
Follow
🍀21/07 - Ya se encuentra en etapa de secado. 🍀El lunes le agregue 30L de agua y 10ml de Top Wash. 🍀Esta planta se encuentra mas resinosa y densa que la otra que también cultive. 🍀Todo fue perfecto desde el momento uno, no tuvo ningún problema en toda su etapa de vida. 🍀Tiene mucho olor, a caramelo o crema, todos sus cocos son densos y gordos. 🍀En total dio 163g. 🍀En estos días seguiré subiendo mas imágenes de como viene. 😶‍🌫️🇦🇷🍀Podes seguirme en Insta gram como @bruweed_arg🍀😶‍🌫️🇦🇷
Likes
5
Share
@Rko41
Follow
Préfloraison pour la lime bomb de chez aficionados French connection planter tardivement seed test ! J’adore
Likes
15
Share
Week 9 of Flower and the TKO is just about ripe at 63 days of flower today (5/12). I've never had to time a DWC bucket flush before, so going purely on instinct. Specifically, Trichomes are mostly milky with amber development. I am hoping a 3-5 day flush with ph'd RO water will bring out any potential color AND that Trichomes will continue to ripen bringing amber to about 15-20%. As for the week in review, I'd say pretty uneventful, which is good. Continued daily water and ppm level drops with stable ph range readings - zero wild swings. She's kicking up some incredibly strong sweet gassy smell mixed with that typical Kush aroma. She's frosty with multiple thick medium-to-large ball shaped colas. Looking forward to completing the DWC bucket flush and harvesting the girl. Next couple of posts (i.e., Harvest & Cure) will end this TKO spring 23 run. Have more of these beans from Ganja Farmer Seeds, so looking forward to running her back in the future.
Likes
Comments
Share
01/01 - This entry is for a grow along with other growers on IG - She is a cross breed between Red Diesel and Oaxacan - The plan will be to grow for cloning then flip her into flower with her babies around week 4 of Veg for the clones - This will be started in my 2x2 then transplanted into a 5 gallon pot and dropped into my 3x3 😎😎😎😎😎😎😎😎😎
Likes
7
Share
@GTools
Follow
Flushing has started and I expect to harvest within the next days. Mostly all the trichomes are milky. Not many clear trichomes left, and some older sugar leaves have have trichomes getting yellowish amber.
Likes
119
Share
Welcome to Week 10 or Flower Week 6 //Media From Day 63 -70of Fast Version B Strain: -Designers Club - Special Thanks to John for hopping through my Messages to Join The SSSC/DP Photo The Project will be Supported by Narcos Seeds to give the Strain the Perfect lifespan it could Deserve . Light used for The Contest Grow : Tenty Pro x4 200w in a space of 60x60 Homebox Ambiente Tent. Were only Starting with 2 Plants from Fast Version B . One didnt worked well . Both Topped Early at Day 9 as Project and Time Deadline from Contest . Everything Doing Well ive done some Mainlining and Defoliation over the days .One Growed a little bit special at the topping . Switched to Flower 12/12 today on Day 28 . Installed Scrog System at Day 29 Nutriets used/using now in Flower Week 6: -Narcos Root Stim -Narcos Bloom Stim -Narcos Hydro A+B -Narcos Magic Boost -Narcos Narcozyme -Narcos PK 13/14 -Narcos K20 -Narcos Crystal Sugar Enough Talk from me , just Enjoy youre Seats and be a part of The Designers Club . Good Luck to Everybody and Keep up Growing !
Processing
Likes
24
Share
**Encontrarás la traducción a español al final de la descripción** From/Desde: 22/07/19 || To/Hasta: 28/07/19 From day/Desde día: 0 || To day/Hasta día: 6 -----IMAGES & VIDEOS----- Video 1: I timelapsed the born time to seedling. I'm testing a new software for iOS that worths it's cost, it's called "SkyFlow", it has also the free version that can be used without paying. -----WEEK SUMMARY----- Hi buddies, i'm very happy to welcome you to my new Spliff Seeds AK single plant grow. In this grow I'm going to try to obtain a plant with 8 main colas, it's going to be more toppings + LST than a Man-Lining. Let's see where i reach with it ;). The first week was as expected, buried the seed on Monday night in a small pot (i'm not sure if it's 0.3 l, but +/-), it be came to seedling on Thursday afternoon and grown till Sunday as it should be. Equipment used ----------------- HLG 100 v2 (100w with samsung full spectrum Led's), also known as "Quantum Boards" DR60 growing tent (60x60 cm) 19,5 l AirPot Small static vent 10w Soil from Bio-Bizz (Light-mix) i will use a small layer of Hard-mix in the bottom of the AirPot on transplant -----WATERING CALENDAR----- 22/07/19 - 200 ml with all week nutrients @ 0.7 E.C. PH5.8 *****ESPAÑOL***** -----IMÁGENES Y VÍDEOS----- Vídeo 1: He capturado en timelapse el momento del nacimiento a plántula. Para ello he probado un nuevo software para iOS que vale su peso en oro, se llama "SkyFlow", también tiene versión gratuita que se se puede usar sin pagar. -----SUMARIO SEMANAL----- Hola compañeros, estoy feliz de presentaros mi nuevo diario de una planta AK del banco Spliff Seeds. En este cultivo voy a intentar conseguir una planta con 8 colas principales, será más a base de toppings y LST que un man-lining en si. Veamos hasta donde llego con ella ;). La primera semana fué como se esperaba, planté la semilla el Lunes por la noche en un tiesto pequeño (no se si es exactamente de 0,3 l pero +ó-), se hizo plántula el Jueves por la tarde y creció hasta el Domingo como debía. Equipmo usado ----------------- HLG 100 v2 (100w con LED's samsung de espectro completo), también se las cono ce como "Quantum Boards" Tienda de cultivo (60x60 cm) AirPot de 19,5 l Ventilador estático pequeño de 10w Sustrato BioBizz (Light-mix) usaré una pequeña capa de hard-mix en el fondo del AirPot cuando transplante -----CALENDARIO DE RIEGO----- 22/07/19 - 200 ml con todos los nutrientes semanales @ 0.7 E.C. PH5.8
Likes
11
Share
@Sup3rNov4
Follow
Slow and steady wins the race Juan has slowed right down Finally the leaves are starting to turn, this is the latest in flower the leaves have lasted me. Shame she isn’t fattening up
Likes
27
Share
3/25/2023 Week 6- Day 1 of Veg (Day 52 overall) Added my first between changes SILICA Top offs. Was worried that when you add it to pre mixed Nutes that it can make the whole thing turn into a gummy looking substance. I was ready to drain the system and start it over for the week if needed, but no issues adding it to the tank. the Silica going into the Res didn't gummy the system up, it did drop my PH by quit a bit causing me to have to bring it back in balance. 36 Gallons in the Tank Silica Add .5mil/Gal = 18Mil I topped some that needed to be topped, I defoliated some that needs to be defoliated. Since I have moved into Week 6 I have increased the light intensity up to just over 500 maxing it out for Veg Cycle. Next increase will be Week 1 of Flower. 3/26/2023 Week 6- Day 2 of Veg (Day 53 overall) All conditions looked great. Other than me not putting one of the humidifiers back right which means it didn't work last night so Humidity was lower than I like. But got the Humidifier back on it's stand correctly and it is now pumping away. With that I decided to give the plants a day off from any stresses, no topping, no FIMing, no Defoliation for today. Just some good old soaking up the light rays and the ability to get all the Nutes they would like.. 3/27/2023 Week 6- Day 3 of Veg (Day 54 overall) Looking kind of Bushy today, so I defoliated some, and topped some. 3/28/2023 Week 6- Day 4 of Veg (Day 55 overall) PH was a little lower than I like 5.74 so I added a few Mil of PH UP and brought it back up to 5.94. Not much else at this stage, just I topped a little and I defoliated a little. 3/29/2023 Week 6- Day 5 of Veg (Day 56 overall) Topped a little, Defoliated a little Watched them grow!! 3/30/2023 Week 6- Day 6 of Veg (Day 57 Overall) Main action today was breaking down my old tent and setting up a new tent and getting my second RDWC system setup and ready for clones. I Topped a little, I Defoliated some and started taking a good look at what I would like to take for clones in the coming days. I have a few bottom branches that look every promising for my clone material on each. 3/31/2023 Week 6- Day 7 of Veg (Day 58 overall) #3 is at 16" Tall #2 is at 13" Tall
Likes
15
Share
@Siriuz
Follow
She's doing pretty good and we're so happy to have you in our greenhouse :3
Processing
Likes
6
Share
3 more weeks of veg then gonna throw them all into flower. 🌺 These are definitely coming along nicer than my last widow run.😅 Gonna do a little lollipopping on these this week & a little defoliating in the process. 🍭
Likes
9
Share
All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
36
Share
7/19: Started new nutrients today. Filled gallon jug with new nutes. Poured half of new nute mix in half gallon jug. Poured the entire half gallon jug into reservoir. 7/20: Bumped light intensity to 50% 7/21: Filled reservoir to the 2nd line today. Added a total of 1 gallon to res to get it to that line. Poured the rest of the mixed nutes for this week (half gallon) and then another half gallon of just plain water. 7/24: Bumped light intensity to 55% 7/25: Sadness today 😞.. While in the process of doing more LST today I accidentally snapped the main stem. I Panicked! Moved plant back in opposite direction to counteract the split. Will be monitoring very closely! 🙏🏾 ***** For this Grow****** “Day Air Temperature” will be the max temp of tent for the week. “Substrate Temperature” will be the average temp of tent for the week. “Night Air Temperature” will be the lowest temp of the tent for the week.
Likes
9
Share