I am happy to announce a new beginning! This time there will be new genetics and seed banks that I haven't tried so far, so I'm very curious to see how it will turns out!🤞🏻☺️ Also it will be the second round for my beloved Runtz Muffin that i promised to bring it back.😁 Now I just need to wait until these seeds will go for 18 hours in a glass with water and then I will transfer them to the paper towel to make them germinate properly and finalize the process in their pots once the sprout stretches by at least 2-3 cm. ☮️💚 Happy growing and positive vibes to everyone 🙌🏻💚 ⚠️ 16-05-21 UPDATE ⚠️ Today i put these little girls into their 1L pots. Now I will let them grow here for at least 10-12 days before transplant them into the final pot (11L) ..See ya at the next update! Happy growing to everyone! ☮️💚 ⚠️ 17-05-21 UPDATE ⚠️ So the first ones to break the soil and reach the light was the Mimosa, K-Mintz and the Meringue. the Runtz Muffin is continuing to grow but still has not removed its seed from its head, which continues to be the slowest and still with a small sprout / root.. I'm sure that in the next few days it will be great together to her little sisters. That’s all for today..😊 See ya next time fam ☮️💚

Ventunesimo giorno di vita, tutto procede regolarmente. Non mi lamento della velocità di crescita :) Le foglie più grandi risultano piegate nelle punte perché durante le ore notturne, le foglie più grandi piegandosi toccano terra.

Last run of the growing season. Biscotti Mintz by Barney's Farm. I wasn't satisfied with the last crop's yield so i wanted another crack at it. This time I'm armed with a digital Lux meter so i can better dial in the light without the guesswork. Looking to start the clones off with between 5000 and 7000 LUX at the canopy. But i didn't like the brightness at 8000 so i upped it to 15,000 Lux. I think the 5k to 8k Lux recommendations for clones was for clones in the process of rooting. Recommended Lux values for vegging plants is between 15,000 and 50,000 Lux. They were very lanky with long internodal spacing which I thought might be insufficient lighting. Because the other Biscotti Mintz grows and research i've done, shows a very bushy indica trait growth pattern. So either i have a shitty pheno, or my lighting wasn't good enough. I'm guessing it was the light because preliminary testing with the Lux meter showed that my canopy was quite under lit last run. Again using 3 gallon pots, this time i am crossing my fingers with the substrate because it is reused coco that i washed and buffered myself. I've never done this before so i have no idea what's going to happen. For all i know they will all be dead in a few days lol. Anyways, i tested the coco pH last night, and after buffering with 2x strength calmag and soaking the coco in a 6.0 pH for 48 hours, the pH is sitting around 6.8 in the coco. Not where I wanted it, but it's doable. I believe the coco brand new out of the bag measures at 6.8 so... I will be watering in 6.0 pH to try to achieve a balance. Treating the roots before planting with Azos and dusting the planting hole with Mykos. The nutrient solution is very mild to start off. About 450ppm. Hygrozyme will be added to the mix and watered in to help break down the old dead root matter that wasn't able to be sifted out of the coco. The cellulase will break those roots down into usable food for the plant to uptake, and clean up the dead roots at the same time. Hygroben will also be added because i have some left from the last crop. And after seeing the results of using bacteria, i'm pretty sold on using it. Today is March 4th, 2024. I like to start on the first of the month but i like starting on Monday's better for keeping my weed soaked brain organized a little easier. I'm thinking to do half strength doses 2x per week instead of full doses 1x per week. It's twice the mixing, but that's ok. There will be 7 plants in total, and the experiment i am running this time, for anyone that wants to check out, is 1 of the plants i will do a seriously severe defoliation on while leaving the rest untouched. And we'll see how it plays out yield wise. I'm sure of the outcome already, but I'm tired of the babbling dummies all over the place that preach fan leaves fan leaves... So we shall see! I had the pH of the nutrient solution set to 6.0 but after adding the enzyme and liquid bacteria, the pH dropped to 5.78, so beware of that if you use those products, even though they claim not to affect the pH. The light dimmer is set to 6 of 10. The clip fan is set to 2 of 10. Temps set to 74F and humidity set to 70% humidity. The light is 18 inches from the canopy at a dimmer setting of 6, which gives the canopy 15,000 Lux. Each plant was gently watered with about 300ml of nutrient solution, which was carefully and gently dispensed with a 140CC syringe Hope they like what i've done with the place lol. P.S. I realized that the 5000 to 7000 Lux was for clones that are rooting. So I had the lux at 12,000 at 18 inches from the plants at a dimmer value of 5. I've now upped the dimmer to 6. Tomorrow i'll check the lux and see where it's at. The clones have just come out of the dome today so i don't want to push them too aggressively too fast. MARCH 5, 2024 I just tested the Par light reading on BM #1 and the BM right in the center. BM #1 Par reading is 247. Center plant is 270. Light dimmer is at 6 and light is now 13 inches from plant canopy. MARCH 9, 2024 Fed again today. There is some progress in growth. 1/2 inch increase. The clones have been upset getting adjusted to their new environment. I've upped the dimmer to 7 and the PPFD and DLI numbers are good. Humidity remains set at 70% and temperature is set to trigger the fan at 78F Light remains where it was so the plants have grown 1/2 so the light will be 12 inches above the canopy. Mixed up 2 liters of nutrients and the ppm was 555, and the pH was adjusted to 6.15. 2ml Per liter of hygrozyme and hygroben were also added. Clones have curled leaves and a perky/droopy stature. The leaf edges are browning a little bit. I'm not sure whats happening with them other than it's just the effects of transplanting and drastic environmental change. What i'm wondering is how they will/are reacting to the used coco underneath? We press on with fingers crossed! 🙏😁

All appears well with these Ladies 😸 They are all continuing to flush. Happy with how everything looks, until next time 🌱💚

Sorry I missed a week doing photos and updates as phone was getting fixed the girls have really packed on weight after they were defoilated increased there feed with expertnutierentd instead of the bio bizz used on the last grow not long untill these girls come down will have other to put in here to flower right away as there vegging in the garden

Hello, everyone! The week went well, and we're flowering. The buds are growing.

Nice buds very sticky 💥 The smell its not a cheese in particular its the whooole plate of cheese with the jam & the dried fruits & earthy its delicious!🧀🍇

Vamos familia actualizamos la cosecha de las Purple OG KUSH de Dutchfem . La verdad que el secado muy bien 7 días en Malla y a los botes, 40% humedad y 24 grados es la temperatura ambiental que han tenido en el secado. Por lo demás de miedo os la recomiendo. Gracias a DutchFem, Agrobeta y Mars hydro , sin ellos este proyecto no sería igual 🙏. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Buenos humos.

On day 1 I adjusted my reservoir to 6.0. I pulled down my mains with wire to spread out the plant wide and low. On day 2 I defoliated the plants, preformed their final topping, and adjusted the reservoir's PH to 5.8. On day 3 the reservoirs PH is 6.0. I increased the flow of my Blumat by 1 carrot on the right plant to increase the moisture content of the medium. On day 4 I awoke to runoff on my plant on the right, so I backed of by half a carrot in hopes that will achieve the proper medium saturation. The reservoirs PH is 6.0. I insulated my reservoir to keep my water temps warmer being in a cold garage in the winter in the northeast ;) I applied some LST to my shoots off my mains. I used soft wire to pull down the shoots. On day 5 I reduced the blumat by another half carrot as the coco is still a little too wet. I will give it a couple days to stabilize before anymore adjustments. The leaves on my right side plant which was the one over watered have salt residue on the surface of the leaves and have some leaf tip curl. I believe as the plant grows out more roots it will adapt, but I have reduced the drippers flow for now and will see how the plant reacts. I adjusted my wires for my LST as the shoots have grown more. On day 6 I removed 2 large fan leaves blocking my shoots. The leaves are still clawing. On day 7 the reservoir is 6.0. The leaf clawing looks like it is improving and the plants seem to be growing at a faster pace now. I'm getting real close to flipping to flower.

Those three Bubble OG plants are something else. They're stretching up so much, it's like they're on steroids or something. Seriously, in the past week they've shot up a ton. I can't believe how much they've grown. Well, it's Christmas again. This year feels a little different, though. Maybe it's the snow blanketing everything, or the way the tree lights up the whole living room. Either way, it's cozy and warm, even when it's freezing outside. I'm really looking forward to seeing what Santa brings. I hope I get that new video game I've been wanting. But most of all, I can't wait to spend time with my family. We always have so much fun This past week was a good one for the plants. They started the first week of their stretch, and they've already grown a decent amount. I can really see them filling out. It's cool to watch them grow so fast. I can't wait to see how big they get by the end I always get a little worried at this stage, like they're not gonna get as big as I want them to. But then I remember how they always end up surprising me. By the end, they're always perfect.

Had to move them from one tent to another. This is the start of week 3 of flower.

Me encanta está planta. Su estructura y su aroma por fin empiezan a mostrar su fina resina. Un abrazo!💚🌱

07.09.2023-63 день и четвертый день без удобрений ! Только вода и отрегулированный пш За день до харвеста срезал веерные листья 🍁 Завтра день икс

Day 1 week 2 Day 2 week 2 Day 3 week 2

Carbon filter and in-line fan with tempature and humidity controls installed, as weak smell noticicable, when opening tent. Watering increased to 2 litres every 3 days with frequency of feeding increased to each time I water.

Should probably start my 2 week flush at the end of this week but I want to harvest this plant and my other one(which is 2.5 weeks behind) at the same time so I'm probably going to try and push the feeding another 2 weeks until I start the final flush, trying to have this stay in flower for 10 weeks, the breeder says flowering period takes 8-10 weeks so I think I'll still be just fine. This week went well, the plants are slowly starting to fade and colors are starting to come out. Gonna follow through with my original plan and continue feeding lightly for the next week or two until I start the final flush. I also raised the lights a bit this week mainly to help and give more light to my second plant that stretched so much its main cola is hitting the grow light, and also to help prevent any foxtailing from occurring.

These beautiful beasts are taking off. Heavily defoliated on F1, a complete bounce back and rigorous growth on F4. Will defo again on day 21 as is my preference. Seeing guys like AstroBoy grow this strain out is inspiring. OSS really knocked it out of the park with these beans, thank you once again for sending them across oceans to land in the Scroggernaut 60 day count down to chop is on. Girls are healthy, and happy. Mothers are being flowered out in the same room, see the diaries, they will be fkn beasts

Outcome was alright since i had a mite infestation for so long, still happy of what i got out of the plants! will update on dry weight and taste etc. Also that was the first time in grew with “decent” equipment, since i don’t have alot of money to spend i got these quantum boards off alibaba & i’m pretty impressed off what they are able to do!

This might be one of my most favorite strains. Heavy yeilder of 185 grams of flower and 30 grams of shake. Thank you for checking out this grow.

These girls are doing real well. Earlier in the week I found a few nut sacks on the far right plant I pulled them off as I found them. If anything, the right plant will be slightly seeded. But the other girls show no signs of slowing down. The left plant has a good smell going on already.