Likes
Comments
Share
Likes
37
Share
8/19 Rained again last night. No damage but medium is drenched. The 9lb kush I've been struggling with seems to be improving. I spent a lot of time on her yesterday and at least an hour this morning defoliating and pruning her. New growth and flowers look promising. I'm cautiously optimistic. I defoliated what needed it. I needcto qpplyvorganocide again. I can see random signs of septoria leaf spot. I really have been off my fame lately. I'm back on it now. This week the garden will be rearranged and I'll pull that big GDP back and better support the blueberry for flower. That NYCSA is a beast. It's resilient as all hell and just continues getting bigger and fuller. Despite pr9blems in the garden this girl seems absolutely fine. At least I don't have that defeated feeling anymore. I've got flowers on a few different plants. I'll try to get a couple pictures. I may take rapacaps advice and add a cheap plastic roof for later flower. I'm not sure if the explosive flower growth is due to the liquid kool bloom but I think I'm going to switch back to tiger bloom as it works better with the other nutes. I'll jeep this updated but I've got work to do. 8/20 Well it Rained again last night. This is getting discouraging. Now my other 9lb kush has the bottom branch all droopy like there's a borer or something. Realistically with the temp swings and the weather I think it's a firm of root rot or pythiym damage which isn't good. I posted pictures of the stalks and would be grateful if anyone has any advice. I'm go8ng back down to look again for a borer hole but i didn't see one. What it looks like to me is that the petroleum jelly I put on the stalks (to battle ear wigs) seems to keep them moist or something inviting mold or fungus. I'm kind of at a loss. I don't really know where to go from here. I don't know if I should just replant the severely damaged plant away from the rest of the grow, bag it and get rid of it or leave it be and hope for the best. I certainly don't want anything spreading. I'm getting tigerbloom today as my plants still need to eat and I'm nervous about the liquid kool bloom. It's probably fine but still. I'll update after I put in more work and research more today. Any advice helps. UPDATE: No borer holes. The stalk looks fucking horrible. It's supposed to rain today. I'm going to give it one more day then I'll amputate that branch and get rid of the other plant if I don't see an improvement. Perhaps I'll plant it in the ground. Don't really know what to do. Family bar b que today so my options are limited. 8/21 FED TWO GALLONS TO THE GARDEN. ONLY USED .5TSP/GAL OF LIQUID KOOL BLOOM. Did not feed dieing plant. Back to super hot weather 80° at 9am. Did a lot of research last night. I also went to several commercial growers and asked advice. What I came up with was a fusarium infection of pythiym infection (Crown rot). I looked at all my stalks and they all have bark and are darker where I applied the petroleum jelly. I'm also NEVER using DE again. It fucking ridiculous amounts of water. Everyone swears by it bit it's not going in my garden again. Since use I can just watch water sit right on the GD soil. I tried to get some examples of what I'm talking about with the stems. I amputated that lowest bottom branch I trained (which was huge). I didn't have time to dispose of the other plant before my wife's doctor's appointment. I'll update when I go back over. I'm sure this won't help and may hurt but I used Bee Safe 3 in 1 on the wound and around the stalks of the plants I saw discoloration on. I didn't touch the NYCSA even though I see some discoloration. I may just be seeing things. That plant I'd super healthy and I don't want to risk losing it. It doesn't seem to have the stem rot like the others. At least I'm not the only one having problems. I hears some pretty bad stories. Still. I'm heart broken. I'll keep this updated after I go back over. FUCK. I MAY just go back to indoor. UPDATE: Got back from the appointment and the rest of the plant was all droopy just like the other 9lb kush (and the branch amputated). I wondered about that because other branches looked worse. I got the totally dead 9lb kush out and found some root rot. AFTER wheeling the bag out I found earwigs and other insects where the bag had been. Awesome. I used h202 to try to wipe down anything that looked Fingal in the stem. It sucks because it seems like that liquid kool bloom pushed them over the edge into flower. Cotton balls where there was nothing. So that's both my 9lb kush plants and the largest plant of the year the GDP that have all bit the dust. If you grow cannabis you know how I'm feeling. I KEEP TRY8NGVTO UPLOAD THE MINUTE VIDEO I TOOK BUT I CLICK ON SOMETHING ELSE AND IT DISAPPEARS. WIFI SLOW. HAVE TO WAIT FOR 5G 8/22 What do I say? Fusarium? Pythium? Stem rot? I'm going to have to get a tent to do some indoor to get the medicine I need for me and my wife. I took the last 9lb kush out and disposed of it. Well it's still in the bag. I'm hoping maybe it might come out of it (beyond hope and far away from the others (but I'm going to toss it today). This blows so hard. Flowers are just starting to develop. I like the liquid kool bloom. It seems to make flowers explode when there was none before. At least on the plants I have left. Actually even the dieing ones started flowering. I'm really concerned considering that one plant (at least) has septoria and every plant has that petroleum jelly on it. Cautio to people that use that. It seems thats where the rot started or is. In spots I spread the petroleum jelly. Anyway my NYCSA has the smallest amount of "funky looking stuff on the stem" so I'm hoping it will make it. Cotton balls starting to appear. If I lose the whole fucking crop I'm gonna go ape shit. UPDATE: Spoke with a few others and did more research. I removed my braces on the bottom of all the plants. It looks like the pjelly and the brace allowed for some type of contaminate. Other growers think I'm being too bleak. They think things will turn out okay. They are more knowledgeable about cannabis than me but I'm with these particular plants everyday. They're probably right and my anxiety is just getting g to me. It's scary seeing a healthy plant completely die in such a short time. After removing the other 9lb kush I could easily see extreme rootbound roots still too the size of the 1 gallon they came in. The bag was PACKED FULL of tight roots so they definitely made it down. The plant however just fell over when I pushed it. I had roughed it up a big before. Anyway I'm praying to the cannabis gods to not take what I have left. 8/23 Fucking pouring again. This sucks. I've gotten loads of advice and made another friend on here. I forgot my phone so I couldn't take pictures this morning. My spirits are up a little seeing that others are at least attempting to help. I'm headed to the grow shop after a night of research to grab supplies to battle this. I'll update later. EDIT: I picked up plant doctor at the grow shop. It was 50% off and I couldn't find anything with trichodermia. However, I've heard good things about this plant doctor. It's systemic and can be used as a root drench and a foliar spray. BIGGEST selling point for me is that it SPECIFICALLY lists fusarium, grey mold. Pythiym crown rot, black mold and all kinds of other shit. The thing that sucks is it's raining and it's not supposed to stop for a few days. That's going to make application more difficult. Oh well. I think I may do a root drench on the one plant that has a wilted bottom branch. I'll keep this updated. Thank you everyone who reached out. Especially growing grannies and my commercial buddy who is always here for me. However he has no experience with this so I'm kinda on my own here. EDIT: I couldn't find trichodermia and I don't have time to wait around and order. I found plant doctor which literally lists it treats all the possibly pathogens my issue could be. Even has a section for medical Marijuana. I did a root drench on the plant up front in the middle AND I did a foliar spray. Might as well get the septoria too. It's systemic but it gets in faster through the leaves I guess. It started sprinkling and I want to test this stuff out before I go ham with it. I did give some to the to other plants bit left my best AND THE TWO SMALLER ONES alone for now. I'm not seeing those issues on the NYCSA and I don't want to risk damaging it. I chose tge root drench as it's raining and the instructions for fusarium WAS a root drench. Thank you all for your help. I will close out tge question once I know it's figured out. Wish me luck. DID A SHORT VIDEO BUT WIFI IS SUPER SLOW SO I NEED TO WAIT TO UPLOAD IT. Went back over. Finished foliar spraying the other two and left the NYCSA and two Littles alone. Hopefully this works. I did I short video. Who knows if it uploads. UPDATE: Went back over and finished foliar spraying. Took a bunch of pictures and did a video but it didn't upload. I'm hoping this will do it. Plants actually look good. And they're flowering nicely! It's too bad I had to do a foliar bug this us supposed to combat PM and septoria as well. 8/24 It Rained last night but hasn't Rained today yet. It's supposed to and uts overcast. I'm really considering putting a roof on my grow (like rapacap suggested) for flower to decrease mold chances. Plants looked happy. I saw no negative effects from the Plant Doctor. I even sprayed a branch of the NYCSA and the stem and a little around tge roots. I finally feel like I can take a breath. I've been working so hard and worrying about losing g everything. I may have been able to save that 9lbkush but I don't think bit was worth taking the chance. The sun is peaking out now. My buddy at the grow shop called and set a side general hydroponics armor si 0-0-4 silica supplement cause it was 90% off. I pad like a buck sixty lol. I'll incorporate that next feed or water. Whatever comes first but it will be good to get it in the regimen. I was worried plant doctor might hurt but the girls seemed to kike it and I went ham on the worst plant. I mixed according to medical Marijuana guidelines on the label (Theres another label on the internet, it's not on this one, it's at the very bottom and just recommdations from commercial growers. I hope this stuff works. Things look better already though. That liquid kool bloom is the bees knees. That's making flowers pop up like crazy! I think I'll stick with it. I was going to use beastie bloom and cha ching later on (and still might) but I hate the lockout bullshit. I've done a bunch of videos but most don't get uploaded as i forget to upload when I leave and wifi is slow here. Anyway at least I've got a few good ones left and pleating the words of my commercial poll buddy, "barring anything catastrophic you should be fine. I know your anxiety gets the better of you sometimes." Couldn't be a truer statement. I'm still getting a tent and doing indoor though. I'm going to need to. 8/25 Did some slight defoliation. I think today I'm going to reorganize my grow space. Things are looking better though. Plants look healthier. Flower is on and they are going to beat hell. I'm glad I took a cutting from NY 9lb kush. I also took one from the NYCSA. THose are tge little ones. The 9lb kush is flowering pretty good. Too bad it's just on a 3 gal. The NYCSA us in a 10 gal grow bag though and is doing amazing. I still see septoria on the leaves. I'm sure I'll need to reapply plant doctor but thus far I'm impressed. Things LOOK better. I don't even remember the last time I watered. It Rained last night. Looks sunny today. I'm going to feed tomorrow. I want the soil to dry out though. We usually don't get consistent rain like this. It's a first for me. I'll update later if I get stuff done.still wondering if I should amputate that wilted branch or give it a bit. It's still attached right now. I'll get some sealant and do some more research.
Likes
16
Share
@nurari
Follow
4 растения радуют, одно набирает и набирает хорошо! 2 растения будут мелкими, но все равно должно получиться круто. Впереди финальные 2 недели
Likes
13
Share
@GYOweed
Follow
Fimmed and transplanted. Branching out.
Likes
4
Share
Did some defoliation now that they are solid into flower, to keep air flow to cut down on chances of mold and to expose lower bud sites to sunlight. I also fertilized again with about 2 buckets of 14 total gallons of water with above nutes minus flora gro, at 1300 ppms aprox.
Likes
12
Share
This week was a busy one in the gardens! After a 7 day dry my harvest from last week was ready to come down! It did dry out a little quicker than I'd like, but still went in the jar around 57% and still smells really terpy and not like hay. I kept the humidity around 50-60% in the dry room however I didn't supplement humidity with a humidifier, i do have an ACI humidifier, but I didn't wanna run it in the summer and accidentally mold the crop! I just ran my dehumidifier at that setting so maybe it got a little dry in there! I trimmed all 5 plants in one day to prevent over drying in about 13 hours. I used a trim bin, trim brush by canna brush and a normal pair of springed shears. I'm curing in Mason jars now. I was able to move the plants in the tiny Mars Hydro Clone tent to my flowering tent. My Vivosun 4x8x6, under my HLG Blackbird at setting 1 to get adjusted. This week I'll get my par meter back from my grow bro and get a good reading. Im going to be transplanting these plants to their final containers as soon as I hit the local grow shop and grab a little more soil! After that I'll adjust the par for full veg and let them really rage! It feels good to finally get some space for them. My larger tent is way better equipped ventilation wise as well, I have 4 clip fans and my 8 inch exhaust fan in there. I currently have the tent sitting at 74-71°F and 56% Humidity. Ethos: Lilac Diesel #22 (x) Grandpa's Cookies #7- This Seedling has a decent internode spacing between it's branches and is keeping them mostly even with very little low stress training. I have been bending the top most branches to help the plant get a little bushier! It's leaves are very dark and doing a little clawing so I'm holding off on the Trinity by Roots Organic! It doesn't appear to bad! It's main stalk is very thick and reminds me of Raspberry Ripple #1! When it's in veg! I'm excited to see if this plant is one I'll keep around or not! I'm definitely hoping it's stretch in flower is containable in my shorter space! Raspberry Ripple Clones (#1 and #2)- The Number One Phenos are looking beefy already, one plant is starting to yellow just a little bit and looks like it could use a transplant here soon! Other than that these ladies are raging as usual. The higher ppfd has kept them really bushy and symmetrical. The Number 2s are still looking really healthy but are the smallest plants in the garden as usual! Finished Flowers (Raspberry Ripple #1 and #2)- This harvest definitely hits a lot harder than my last one! Having the microscope to really get a good look at my trichomes and pushing the plants and extra two weeks really made a big difference! Ripple #1- These buds are big and purple! Decently frosted! The leathery, black licorice smell Ripple #1 gives off, is really strong this round! The harvest weighed 7oz 25 grams, 6 oz and 16 grams of "A" Nugs, and 1 oz 9 grams of popcorn buds! Ripple #2- The Ripple #2 is a little less dense than the #1 but it is pretty frosty and smells like a mixture of yogurt and hazy weed. This harvest weighed 5 oz 20 g, 4 oz and 6 grams of decent sized nugs and 1 oz 13 grams of popcorn nugs. Giving me a total harvest of 13 oz and 17 grams, 10 oz and 20 grams of "A" nugs and 2 oz and 23 grams of popcorn nugs. In a 4 x 4. That pretty much sums up the harvest and this week! Thank you for checking out my growdiary! -Starfish
Likes
46
Share
Welcome back guys, This time bigger and different! For this time I'm going back to the basics and i will be using 240 Amnesia Haze clones! I start with the old 3 liter pots and they will be repotted into 7 liters, there was no space to have them in 11 liters in the upcomming weeks. The grow Medium is special lightmix soil from the growshop( it has like ph 5.8-6 with ec 1-1,2 in it). Beneeth the soil i putted Expanded Clay so the water will go out more easily. I have got 12 x 600 watt HID lamps in there, but for now I am just using a few. I'm very busy at the moment so my growroom isn't finished yet. This is only half of it. I had to start because those clones, which i have orderd, where deliverd lol. So there was no time left. The lamps are high at the moment because the clones need time to root. If you have your lamps to low when just planted your clones, your clones will dry out and die. They need to settle first for a few days. Day 7: All went well. I do have a ''bad'' corner. Thoose plants are strugling to develope. Nothing mayor, it is normal with this many plants that some clones doesn't root and grow properly. Next week i will decide which one I keep and which I throw away because I don't like to make two schedules, feeding buckets and more, just for a few weaker plants lol. The lamps are at 60-70cm from the canatopy. Some preff it higher and only at that range when flowering. But I want to have it like this because I want strong stems, more bushy plants instead of weak stems and long ugly anoying plants that produce fluffy buds. These sativas love to stretch and grow big, I personally don't like that, so I try to force strong stem and bush growth. Also increasing a bit in Aptus Regulator might force it as well. I did sprayed them with Canna Cure as well, to prefend against all kinds of stuff and give them a little feeding via the leafs. Currently still to busy in real life. Hopefully I finish my full grow room in the upcomming days, spread the plants and maybe even repot them into bigger ones. The rooting and growing proces goes well. They must go a bit larger untill I force them into flowering. See you guys next week.
Likes
13
Share
Banana Jelly has a very nice bushy shape, she responds good to LST and doesn't stretch a lot when turned into flowering. Good resistance as we performed some HST and even during flowering defoliations, no sign of stress or delays in growth. The bid smell is almost like nuts, fresh almonds with a sweet but slightly gassy background, a true gem to explore. We will definitely repeat this one!!!
Likes
3
Share
Likes
19
Share
Hi everyone 🤗. The buds continue to grow 😀👍. It starts to smell really good 😍. The bud structure also looks very nice, and is already covered with resin 😎. This week they continue to get 4-5 ml / l water from the Canna Bio Flores. I hope you enjoy the update, stay healthy 🙏🏻 and let it grow 🌱😃 You can buy this Strain at : https://greenhouseseeds.nl/ Type: Wonder Pie ☝️🏼 Genetics: Wedding Cake x OG Kush 👍😍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Flower Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Earth: Canna Bio ☝️🏼 Fertilizer: Canna Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0
Likes
Comments
Share
Flowering week 5. PH: 6.1 / Saturday - Sunday EC: 1.44 PH: 6.0 EC: 1.52 / Ec lifted on Monday
Processing
Likes
3
Share
Stopped the organics as this could be causing the leaf claw. Won't defoliate for the foreseeable future as i think this is enough. Feed is 2.15k ppm. Had to use TaNLiN as had a fungus gnat problem. One drop into the water and a stir done the job after about a week or 2. Seem to be watering this every day. Always empty the runoff after 20 mins of watering. 18-24 hours later the soil will be practically dry.
Likes
37
Share
🌱 Germination Journey with Terpyz Mutant Mentha de Croco 🌱 Hey Grow Fam! Today kicks off an exciting adventure with Terpyz Mutant Mentha de Croco genetics. I’ve got 10 regular seeds ready to sprout, and I’m looking forward to discovering some beautiful female phenotypes—and maybe even a standout male for potential future breeding. It’s been a while since I’ve worked with regular seeds, so I’m thrilled to dive in! Germination Process Overview: Here’s a step-by-step rundown of the germination setup and process, with a special focus on the equipment and nutrients that are helping these seeds thrive right from the start. Step 1: TheCannaKan Germination Pod 🌱 For germination, I rely on TheCannaKan—a device I’ve come to love and trust. It’s designed to create the perfect microclimate for seed germination, and within just 24 hours, the seeds started showing signs of life. By the 32-hour mark, they were all ready to be transferred to the next stage! I can’t recommend this gadget enough for anyone serious about getting strong, early growth from their seeds. • Why TheCannaKan? • Humidity Control: Ensures seeds stay hydrated without oversaturation. • Stable Temperature: Maintains an even temperature around the seeds, so there’s no shock or stalling. • Enhanced Oxygenation: Keeps fresh air circulating, helping prevent mold and ensuring seeds don’t suffocate. Step 2: Transfer to Root Riots & Aptus Holland Supplements 💧 Once the seeds were sprouted, I transferred them into Root Riots, known for their excellent water retention and structure that encourages strong root growth. Root Riots also have a pH-balanced, spongy texture that makes it easy for roots to penetrate, promoting sturdy, healthy root systems. At this stage, I started using Aptus Holland’s Regulator and Startbooster at 1ml/L each. Here’s why I chose these products for early growth: • Aptus Regulator (1ml/L): Helps strengthen the plants against environmental stresses by supporting cell wall structure. It’s a fantastic choice for giving young seedlings an early boost in resilience. • Aptus Startbooster (1ml/L): This product provides essential microbes and nutrients that stimulate root growth and early plant vigor. Especially for regular seeds, the early root development makes a noticeable difference in later growth stages. Step 3: Lighting with Future of Grow (FOG) LED at 200 PPFD 💡 For lighting, I’m using a Future of Grow (FOG) 600W LED. For the germination stage, I’ve dimmed it to around 200 PPFD (photosynthetic photon flux density), which provides just enough light for healthy, strong seedling growth without overwhelming them. • Why Low Intensity? • 200 PPFD ensures that young plants aren’t exposed to too much light, which could cause stress or stunting. This level of intensity is perfect for encouraging healthy development without risking “stretching.” • The FOG LED provides a balanced spectrum tailored to plant growth, setting up these young sprouts for success as they grow. Step 4: Environmental Control with TrolMaster Tent X Controller 📲 For monitoring and control, I’m using the TrolMaster Tent X Controller, which lets me dial in every aspect of the environment to make sure these little ones have the perfect conditions for germination and early growth. • TrolMaster Benefits: • Precision Control: Adjust temperature, humidity, and lighting all in one place. • Notifications: Sends updates in real-time to my device, so I can make adjustments as needed without being physically present. • Consistency: Maintains stable conditions around the clock, reducing stress on seedlings and ensuring they’re thriving. Grow Tips & Reflections: Germination is one of the most crucial stages in a plant’s lifecycle. Starting with strong genetics like Terpyz Mutant Mentha de Croco, combined with a solid germination setup and the right nutrients, creates the foundation for a successful grow. 💡 Quick Tips for Fellow Growers: • Hydration Balance: Don’t oversaturate! Moisture levels should be high enough for the seeds to sprout but not so wet that they drown. • Light Management: A low PPFD for young seedlings prevents stretch and keeps nodes tight, preparing them for a healthy vegetative phase. • Environment Consistency: Use a reliable controller like the TrolMaster Tent X to manage your settings, and consider monitoring tools for real-time adjustments. Shout Outs to the Community: Big thanks to Terpyz Genetics for these incredible seeds, Aptus Holland for their top-notch nutrients, Future of Grow for the stellar LED lights, and TrolMaster for the amazing controller. Also, shout out to all of you in the growing community—you make this journey exciting and filled with endless learning. Let’s keep growing and sharing together! That’s it for the germination update! Next up, I’ll be monitoring growth closely to identify strong females (and maybe a standout male for breeding). Stay tuned for updates on our Mutant Mentha de Croco adventure—this is just the beginning! Genetics - Mentha De Croco https://terpyz.eu/products/menta-de-croco-fern-type?_pos=1&_sid=e9237cbcb&_ss=r DogDoctorOfficial Discount Codes @ terpyz.eu - DOCTOR 15% off Nutrition - @aptusholland https://aptus-holland.com/ Led Power @ F.O.G. Future Of Grow https://www.thefuturofgrow.com/en/online-store/BLACK-SERIES-600-p489093171 Controls @ TrolMaster https://www.trolmaster.eu/tent-x As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so Growers Love To you All 💚
Likes
6
Share
Currently at 2,722 grams with stems and untrimmed. Hoping to get around 800 grams dried. Prior to harvest I run lights for 48hrs
Likes
2
Share
Lets wait for the two ladies theyll be ready in two weeks. I already started flushing them couple or three days ago I will keep growing in coco this was my first time and not gonna be last.
Likes
7
Share
@DIY95
Follow
Blütewoche 7: Nachdem ich den Großteil meiner Frustration über den Fehlschlag verarbeitet hatte, entschied ich mich dazu den Plan doch nochmal zu überdenken und separierte die gezwitterte Übeltäterin ins leere Nebenzelt um diese schonmal auf die letzte Reise zu schicken. Wie man auf den Bildern erkennen kann kontrollierte ich die Pflanzen an Tag 100 noch einmal genaustens auf Pollensäcke. Diese ließen auch nicht all zu lange auf sich warten und es waren doch mehr als gedacht. Aber als ich mir die Terpene anschaute und feststellte, dass der Großteil schon milchig ist und die Pflanze im Vergleich zur ChocolateHaze beispielsweise von Samen wirklich verschont ausschaut, stellte ich mir folgende Frage.. Ist es unter diesen Umständen nicht sinnvoller , die Pflanze zu nehmen wie sie ist und dafür das Risiko zu minimiere nur noch mehr Samen zu züchten? Natürlich würde ich sie lieber noch 2 Wochen in Blüte lassen, aber wer weiß wie viel Müsli in 2 Wochen nachkommen können.. Ich will es nicht herausfinden 😒😅 Also bereitete ich einen letztzen Trank zu, welcher der Pflanze für die kommenden Tage etwas " beruhigen " sollte. - To be Continued -