BlueDream
Ottimo raccolto, bei fiori sani buoni e sopratutto forti. Sono contento di avere da parte 2 semi nuovi da coltivare!! La pianta da subito è cresciuta in altezza mantenendo lo spirito sativo
RQS Purple Punch Automatic Grow 💜
Kirsten
@Kirsten
Follow
31.12.24: I have been readjusting the LST pegs and wire daily. Sometimes, twice a day! (I know, too much time on my hands)! 😆 The plants have responded fantastically! I'm so glad I gave it a go. Some plants have been a bit too tall, and I snapped Do-sì-dos P3, pulling the stem down. Audibly snapped 😬I let it be, though. It seems to have healed mostly, in only 2 days. I have increased the lighting to 70%. They're getting watered a few times a week, with 1 litre of Dechlorinated water, containing the following nutrients and additives; 1ml of Biobizz Bio-Grow, 1ml Biobizz Top Max, 1ml of Biobizz Bloom, 2ml of cal-mag, 1g of Ecothrive Biosys. The plants are responding well to this concoction, so it's all good so far. The leaves are looking greener and are getting darker. Will be monitoring to continue readjusting the LST ties. Also, to monitor the increased lighting level, to make sure they can handle that yet. 1.1.25: Happy New Year! I have continued to readjust the LST wire and plant pegs. Several times a day. Coincidence would have it, I have a 6ft tropical aquarium which was time for cleaning! I always water my Acer tree in the front yard with this water, with beautiful results 😍 👌 🍁 I decided to try it out in my indoor garden. I'll post photos of before and after to see the difference, good or bad 😅 3.1.25: Plants are doing very well, except for PPP3 I'm quite disappointed in that one, as I feel like it's wasting a space. I guess I'll have to keep it, along with the Do-sì-dos that I snapped twice, which refuses to die 😅 I started to lightly defoliate, which is difficult because I always get carried away with it. I'm going to water again with the nutrients in description of this week. 4.1.25: Continuing to defoliate and adjust the LST pegs and wire. Watered today with 1ltr of dechlorinated water PH'd to 6.0. With the following nutrients;- 2ml Biobizz Bloom, 4ml Biobizz Bio-Grow, 2ml Cal-Mag, 2ml Ecothrive Flourish, 0.2 g/ltr of Ecothrive Biosys. I've increased the Nitrogen by adding double the amount of Biobizz Bio-Grow. I'm trying to keep them growing for as long as possible! I really want to keep the strength up and keep the leaves nice and lush green! 💚 Will update here with more photos and videos. Thanks for checking out my diary 🍃 ✌️
First DWC grow (third try)
(Maybe) final week. Trichomes ckeck looks like there's still some time. Nice color so far. Cherry Gar-see-ya is pretty dark now. For the last 4 days just Flawless Finish and Cleanse.
Flower Cycle #2
Few days into flowering and the lower internal nodes are already stretching up through the trellis. Hope they keep stretching for another week before they start bulking up.
Sundae Driver Auto Zamnesia
Really looking good so far, she's nugging up nicely. Can't wait to see the finished product!
Rainbows
Ferinky
@Ferinky
Follow
En esta actualización se incluyen 2 semanas ya que por trabajo me fue imposible añadir la semana anterior. El día 15 de Agosto recibió la segunda pulverización de Bacillus Thuringiensis para prevenir el ataque de las orugas. Sigo alternando riego de agua un día con riego de Ascophillum Nodosum al día siguiente. He dejado de regar con Cannazym.
Multi-strain Grow
At least one plant or more is needing water daily as they are drinking so much.. still trying to pull the humidity down as it's in the high 60s. Other then that..the girls are looking phenomenal.. Hope to see you guys till the end..It's Going to be an Amazing Harvest
Church Day!
Well today is 20 I topped her 2 days ago and as you can tell this girl is very happy very healthy and she is rocking and rolling.. she's in a 1 gallon for now and a week or two I'm going to transplant her into a larger pot maybe a 3 gallon maybe a four we'll see but for this girl I am not using organics I'm going back to my old formula and I'm expecting or hoping at least to pull a half pound off of this girl because this is a strain I really want a decent amount of... A huge thank you too Zamnesia Seeds for the opportunity to showcase their genetics which so far have been awesome.. as you can see this is the plant from a one seed pop, I didn't pop three seeds and pick the best plant so I'm very pleased with the results thus far.. this girl just wants to grow and grow and grow.. I highly recommend you guys checking out Zamnesia Seeds as they have everything from seeds to smoke shop needs they even have THC a flower of some of the strains they sell .. they even have kratom to mushroom gummies to rolling papers to absolutely anything you can think of large selection of bongs and the best part is they have an amazing loyalty program called the Tribe .. are definitely worth three or four minutes of your time to check them out for yourself.. this girl's doing amazing just like the watermelon candy autoflower that I'm growing by them.. so far I'm very impressed with their genetics.. hope everyone is doing good and I hope everyone's girls are doing as good as this one.. God bless and happy growing ✌️😎 https://www.zamnesia.com/us/
Super Bio Soil Explosion 💥
Some of you may have wondered: Why do I use CO2 at average 950 ppfd μmol/m2/s (moral flow)? The answer is quite simple. Because of lack of space in some regions of my cultivation area, I simply cannot keep the ideal distance to my Sanlight high-performance lamp, due to some height growth of various strains. And so some of the main colas have ppfd values of 1250 μmol/m2/s and even more... So this is how I manage to achieve and compensate for such high radiation levels even with a CO 2 balance. And I have to say, my strategy to avoid various light stress symptoms works just fabulously. In combination with CO 2 implementation, my babies are simply unbeatably insensitive to light. Thats it! Beginning of 3rd week flowering: Again feeding my babies by 36 hours fermented potions of Bio Tabs Kompost Tea PK-Booster (15 g pro Liter) and added: 5ml Orgatrex/Liter 1 Spoon of Bactrex 1 Spoon of Mycotrex 1 Spoon of Mycco-Vital 1 Spoon of Dynomyco A little tip for those who are interested in small modifications that have a big difference or influence - on the result - effect - beauty - health - taste! Before adding microorganisms or beneficial bacteria or Mycorrizae and Trichodermas, please use oxygen-saturated water. On the one hand, unwanted chlorine gases evaporate and the small world of the microbiome becomes even faster and more rewarding in compost tea to sprout. Last but not least for this week, I would like to introduce my reasons, why I prefer growing biologically and sustainably. First of all, it’s something which suits very well in these times/days we are living now. Sustainability is a big need and task for our planet. 🌎 Nature means life. Our home, the air we breathe and everything that surrounds us. Not just today. Hopefully tomorrow as well. Maybe I'm starting to protect our environment on a small scale, but maybe I can also make a big difference at all. If you change the way you look at things, the things you look at change... I thought about what’s the difference, between Mineral Feeding and Super Soil Feeding. It’s very easy. Biologically Growing is a similar process than the natural soil activities out there in the lap of nature’s. So plants has to work and interact with the microorganisms and microbiomic communities in the soil. So the plants will never get lazy like the lazy ones of mineral feeding growers. If you grow biologically, you will feed the soil first and the microorganisms will support every parameter next to your plant conditions. And that will generate an unbelievable spectrum of Terpenes and Trichomes you will never forget. It’s the same comparison, when you daily visit McDonalds and you eat only fast food. How does your body and mind react on this shit for money?!?! May I invite you to think about it… See you next week dear Growmies! Have a nice Weekend and take care… Peace out! Addendum for Day 53: At the moment we unfortunately have another winter onset here in Germany. This means that I am forced to take additional heating measures due to structural facts in order to be able to keep the temperatures constant. After all, just tonight the thermometer climbs again to -1 degree Celsius. In addition, my exhaust air system runs out of my bedroom terrace and I therefore grow winter and summer with the patio door open. Well, sometimes I experience real weather-related challenges. But all in all, no problem... "Where there's a will, there's a way." Addendum to pouring out the fermented PK tea: I always administer half a liter of lukewarm aerated water with 3.5 ml of cannazyme per liter to each plant. This means that the "root machine" is not supplied with supplies unprepared and the nutrient solution can thus also be better distributed in the soil. Since I also work with cloth shoes, I spray them evenly moistened everywhere with water that is also warm before pouring them out from the outside. This has the advantage that the moisture stays where it should: in the pot! ... I did the math today ;-) We are still in week 7 until this Friday. And week 8 starts on Friday! OMG... still so much time yeahh! Today my Fast Buds Sour Jealousy and Sweet Seeds Big Devil and Dark Devil Automatics arrived. I'm looking forward to it. This time Fast Buds next Time Sweet Seeds. Love them too. Very beautiful genetics. Today a review video of the beginning of week 3. At the time of the pictures, I had minor signs of nitrogen excess. (Light peaks first at the crown of the roof and then slightly continuing to the middle section.) I then painstakingly racked my brains as to why this could be. I found that very slight dry spots had formed and therefore the root found small accumulations of nitrogen that caused its problems. But then, when I carefully homogeneously checked the moisture content in the substrate, the problem evaporated again. However, they had not shown any loss of growth rate during this time. Nevertheless, they developed as expected. They Strawnanas had no problem with that. In the end, I always have a hard time killing them. But I guess that's the way things go. We live and die. We come and go. But it's not there yet. ;-) Tomorrow is day 56. Tomorrow’s updating day! Can't wait to see their progress. Have a good time and see you tomorrow… 🏽🕊️ 🏽 ☮️🕊️
Acapulco gold auto
Not wet weighing but will update when dried
The New & Blue Fire by HSO
Easy strain to grow, didn't stretch much and yielded good for a cookie. Frosty REALLY dense buds fragrant buds. Really good. 🙏: 1:
zamnesia
Día 6 de diciembre ,tenemos una amanecida de gran niebla que se mantuvo en la mañana con ello una alta temperatura en la noche del cultivo amaneciendo este a 90% de humedad Después del encendido de la luminaria y colocar dos pequeños humificadores de usar y tirar..en dos horas ,la humedad se mantiene bien. 55% En el día de antes de ayer se le aplicó un buen riego. Día 7 Humedad en el cultivo de un 60% Hoy le e metido otro riego con todos sus nutrientes de vegetación y metiéndole un poco de floración La EC 1100 El ph 6 Un ventilador dejó de ser oscilante para quedarse fijo.. hahaha meteré otro en unos días más grande y oscilante .
shorts_status_processing
First grow
creichs
@creichs
Follow
Height is for holy punch. power flower is about an inch shorter
FB, FF, Purple Lemonade & Gorilla Cookies
Saturday 16-11-24 , Flowering day # 53 week 8. Harvest day! Cut branches off plants & hung the 2 front plants off the light. Put scrog net back in with a large flyscreen laying on top, & spread branches from the back plant over it. This allows complete air flow around the buds. Running a single oscillating fan beneath pointing to the bottom. Temperature is around 24°C & RH is 55%
Utopia Haze
Blütewoche 4 - 04.09. – 11.09.2026 Diese Woche stand vor allem eine größere Entlaubung an. Ich habe ordentlich Blätter entfernt und gleichzeitig einige kleine Triebe aus den unteren, dunkleren Bereichen rausgenommen. Hauptgrund war die momentan ziemlich hohe Luftfeuchtigkeit. Teilweise lag sie bei 70–80 %, deshalb wollte ich die Pflanze etwas luftiger bekommen und späteren Problemen mit Schimmel möglichst vorbeugen. Mittlerweile bekomme ich die Luftfeuchtigkeit zeitweise schon in Richtung 50–60 %, allerdings schwankt das Ganze momentan ziemlich stark mit dem Wetter und steigt auch mal wieder auf knapp 70 %. Noch mache ich mir deswegen keine großen Sorgen, aber mit zunehmender Blütendichte muss der Wert auf jeden Fall weiter runter. Ansonsten sieht die Utopia Haze wirklich richtig gut aus. Der Stretch scheint mittlerweile weitestgehend durch zu sein und jetzt geht die Energie deutlich in die Blütenproduktion. Die Buds werden langsam kompakter, die weißen Härchen immer zahlreicher und die einzelnen Blütenansätze wachsen Stück für Stück zusammen. Auch die Harzproduktion nimmt ordentlich Fahrt auf. Die Zuckerblätter sind mittlerweile richtig schön mit Harz überzogen und die Pflanze klebt wie Hulle. Gleichzeitig wird auch der Geruch immer intensiver. Momentan würde ich ihn als sehr süßlich-würzig beschreiben, mit einer zusätzlichen Note, die ich noch nicht so richtig zuordnen kann. Alles in allem bin ich mit der Entwicklung gerade super zufrieden. Jetzt bin ich gespannt, wie sich die Buds in den kommenden Wochen weiter aufbauen.
Glue Gelato Auto from Barney's
CreoWeed
@CreoWeed
Follow
Annnnnnd here we go guys this was her final week. It went pretty fine even though I was hoping for some more fat colas, but you know, we take what she gave 😂😉. From day 65 to 67 she stay on a dark room and in day 68 I chopped her. Now is drying in a room at 26 degrees and 62% RH. I guess it will be ready in a week, and so I'll post the final results... That's all pals, stay tuned and stay high!
Clones and Seeds mix JL420
JL420
@JL420
Follow
en un par de dias acabo con la nutricion y empiezo lavado y solo agua de osmosis
Montel tragic rise fall of Jar Jar Binks
CalGonJim
@CalGonJim
Follow
1/12/26 4:18AM MONDAY.....💪💪💪💪👌 1/12 CANNAKAN DAY MEDICINAL SLAVERY WOULD MAKE HARVEST A BREEZE!! ABOUT THE LEDS Yes, the **Samsung LM301H EVO diodes** in your Mars Hydro lights (likely an FC-E series like FC-E3000, FC-E4000, or similar) are among the most efficient horticultural LEDs available right now—individual diodes hit **3.14 μmol/J** efficacy, pushing the whole fixture to around **2.85–2.9 μmol/J** PPE (photosynthetic photon efficacy) in manufacturer specs and independent tests. That's top-tier for full-spectrum grow lights, meaning they convert more electrical power into usable plant photons than older diodes or cheaper LEDs. If they "seem more efficient than the PPFD meter says" (your plants thriving at lower wattage/height adjustments), that's actually common and not a contradiction—it's often the **real-world efficiency** shining through once nutes/stress are fixed. Here's why this happens and what your recent wattage drop (a few more watts lower) likely means: ### Why Samsung LM301H EVO Can "Seem" More Efficient Than Raw PPFD Readings Suggest - **High PPE + Uniform Distribution**: These diodes excel at producing photons in the PAR range (400–700nm) with minimal waste (heat/loss). Mars Hydro FC-EVOs achieve strong average PPFD (e.g., 750–1000+ μmol/m²/s in tests at recommended heights/power) with even spread—no hot spots wasting energy. When your nutes were suboptimal (Advanced Nutrients issues), plants couldn't fully use the light (wasted photons → stress, stretch, lower efficiency). Now dialed in (GH powder + aminos + mycos), they convert more of that PPFD into growth—making the light "feel" stronger/more efficient even if meter numbers stay the same or drop slightly. - **Meter Limitations & Calibration**: - Handheld PAR meters (especially cheap/older ones) can under-read full-spectrum LEDs like LM301H EVO (strong white + red enhancement). They often have poor spectral response to the exact mix, reading 10–30% low compared to pro tools (Apogee SQ-500) or calibrated apps. - If you're using an app like Photone (mentioned in your diary), it's generally more accurate for Samsung full-spectrum lights (especially on iPhone; Android varies but often close with diffuser/paper). Many growers report Photone matching or exceeding cheap handhelds on LM301H setups—sometimes showing higher effective PPFD than a basic meter implies. - Bottom line: Your plants are the ultimate meter. Thriving (miraculous growth, no burn/stress) at lower wattage means the effective usable PPFD is higher than a potentially under-reading meter suggests—efficiency win. ### Your Wattage Drop & What It Means Lowering by a few more watts (on top of the earlier ~10% drop) is smart and aligns with the efficiency gains: - Dimming on Mars Hydro FC series is **very linear**—tests show PPFD percentage tracks close to (or slightly above) the dimmer % because diodes run more efficiently at lower currents (less heat/loss). - Example: Dropping from 100% to 90% might only reduce PPFD by ~8–10%, not full 10%, due to that efficiency curve. - Your plants handling it (still "miraculously better") without stretch or pale leaves confirms the sweet spot: likely 450–650 μmol/m²/s veg/late veg range now, with room to push if pistils emerge. - Solar bonus: Every watt saved = less battery drain on cloudy days, cooler tent (less fan/AC draw), and more headroom for extra plants without spiking consumption. **Practical next steps**: - Recheck PPFD (if using Photone/handheld): Average multiple canopy spots at current height/power—aim 450–600 for late veg autos, 600–800 early flower. - Watch response: If nodes stay tight/dark green/no cupping, you can drop another 5% or lower height slightly for denser canopy. - Log kWh if your inverter shows it—track the drop to celebrate the savings. - If meter still "under-says" vs. plant performance, trust the plants more—Samsung EVOs are proven beasts when the rest of the grow is dialed. This is textbook optimization: nute fix → better photon use → lower power for same/better results → solar efficiency skyrockets. You're building a truly lean system. How low are you at now (e.g., 70–75W total?)? Any pistils or new growth explosions today? Keep the momentum—it's paying off big. 🥊🍌👨‍🔬🚨🌞💪💪💪💪💪 1/15/26 12:36AM L-Phenylalanine: https://pubchem.ncbi.nlm.nih.gov/compound/L-Phenylalanine#section=Crystal-Structures That’s your Mars Hydro bar-style LED grow light setup in a compact grow tent (looks like a 2x2 or similar Spider Farmer tent branding on the mylar walls), running super efficiently right now! Breaking down what I see from the photos: • The light is a multi-bar LED fixture (probably from Mars Hydro’s FC series, like FC3000, FC4000, or a smaller EVO variant) with Samsung LM301H (or similar LM301B/H EVO) diodes—these are high-end, efficient chips known for uniform distribution, low heat, and great full-spectrum output (warm white + red/IR boosts for veg/flower). • It’s hung at 19 inches (measured from the light bars to the canopy or sensor plane, with that white dotted line marker). The tent shows a hygrometer/thermometer combo reading 76°F / 53% RH (nice stable veg conditions—cooler side helps prevent stretch). • Your PAR meter app is showing 327 μmol/m²/s PPFD (Photosynthetic Photon Flux Density) at that spot/height—solid reading for where you’re at. • Plants look like young cannabis in veg stage: multiple small pots (fabric or repurposed buckets like Krøger cottage cheese tubs—classic budget move!), healthy green canopy with some colorful accents (maybe early purpling or strain traits), topped or in early training, sitting in coco coir or similar media. • Power draw: ~50W current (from the energy usage screenshot), averaging super low over time (0.48–0.76 kWh daily average). That’s impressively efficient—likely dimmed way down or a lower-wattage model (e.g., 150–300W rated, but running at partial power). Total consumption over 30 days at ~14.5 kWh is pennies on the electric bill. This aligns perfectly with your earlier plan to target ~500 PPFD but getting great results at lower wattage/intensity. Right now at 19” and 327 PPFD: • That’s in the sweet spot for early-mid vegetative stage cannabis (typical recs: 300–600 μmol/m²/s for veg, starting lower ~300–400 for young plants to avoid stress, ramping up as they bush out). • Bar-style lights like this excel at even spread (no hot center like older quantum boards), so your canopy is getting consistent light without bleaching or stretch in spots. • Low power (49.6W) means minimal heat buildup—fans and passive cooling handle it easily, keeping temps/RH dialed (76°F/53% is golden for veg; prevents mold and encourages compact growth). Why it feels “great results at lower than recommended”: • Samsung diodes are top-tier efficient (often 2.8–3.1 μmol/J), so you hit usable PPFD without cranking full power. • Many Mars Hydro FC models recommend 18–24” for veg at 50–75% dim (your 19” fits right in). • Your plants are responding well—lush, no obvious deficiencies/stress, and you’re feeling physically ready to top/fill pots after the delay. To push toward your 500 PPFD goal without overdoing it: • Lower the light a few inches (try 16–18”) incrementally—PPFD scales roughly with the inverse square law, so dropping height boosts intensity noticeably (could jump 20–50% depending on spread). • Or bump dimmer % if it’s not maxed (your 50W draw suggests plenty of headroom). • Retest PPFD at multiple canopy spots for average (center often higher, edges lower in bars). • Watch for tacoing/upward leaf curl (too much light) or stretch (too little). This setup is dialed for low-energy, healthy veg growth—perfect for your “lower wattage wins” approach. Plants are happy, tent’s stable, and you’re crushing it efficiency-wise. If you drop the height or dim up, snap another meter reading/pic—I can help fine-tune further. How old are these ladies (weeks from seed/clone)? Any specific strain notes, or planning to flip to flower soon? Keep the momentum—today’s a win! 🌱💪😂