Hello again Good week, she grew at least 10 cm. Healthy green leaves. One watering with nutrients. Every 5 days vita race spray, other days pure water. Gonna give rhizotonic next watering. Also did a slight defolation. Removed the 2 lowest fanleaves. No need to put energy in those future popcornbuds. She spend most of the week inside behind the warm window sun with a little breeze from a ventilator Next week it will be very warm here. I think I will leave her outside. She's strong enough by now. Upcoming week I will also start the Neem Oil treatment. Purely preventive but outside there is more chance on bad bugs so I wanna be ahead of problems instead of waiting for the first signs😁 keep an eye out cause I will post more pictures this week to show how she develops. Keep growing strong friends.

Overal I’m very happy. The weight’s looking insane. Obviously imma update you after drying and curing. Can’t say to much at this point, apart from the fact that everything is looking very nice!

👉Alrighty Then👈 77 days in flipped at 28 days 👉Went on Vacation 👈Came back to few that are top heavy 👌 had to do some tie ups and downs ..... It's been a great week all plants are killing it ......... 👉we are now in full flowering 👈 👉So I topped all but Babba Kush and Slurricane they didn't require it ... 👌 Got some nice level tops 👌 I've now started lowering there full flowering nutrients program , so we are set to go ...... up to the flush 😳 Persian Pie from Greenhouseseeds Full Gas from Greenhouseseeds Babba Kush from Greenhouseseeds Rainbow Melon from Fastbuds Papaya Sherbet from Fastbuds Weddingcheesecake FF From Fastbuds Purple Oreoz F1 From Seedsman Slurricane From Premium Cultivars Soil by Promix Nutrients by Cronks Well this should be fun 🙃 Thanks to all my growmies out there for stopping by its much appreciated 👈 👉Happy Growing👈

These genetics are insane! They are growing so quickly and the taproots on these girls look beautiful🔥 can't wait to show you more❤️

Entering week 10 this girl is looking pretty! Smaller buds but great trichrome production, smells great, and looks like another good week. Harvest is close but still a good week or so to finish. I pollinated a branch of my other autoflower, but with this one I just did a couple small flower sites. All growing good Will leave then on to let the seeds finish if need be, will be close as this girl is finishing quicker then the other.

2/12/25 top dressed with 2 tsp grow 1 tsp microbe and 2 tsp bloom. this genetic is always sooo freaking frosty. shes already starting to frost up on the fan leaves. finally looking like shes in flower. it took her awhile to get started i feel like compared to past grows/ other Cultivars. 2/18/25 she has a very nice and even structure to her. a bunch of tops that are 3-5 node top colas with a nice disconnected set of buds after an inch two space between the nodes. frosty gassy and fairly large considering pot size.

It's a nice change of pace to have these warmer temperatures, even if it's not quite spring yet. Low 40s during the day is a lot more comfortable than what we've been dealing with lately. Hopefully, this is a sign that spring's around the corner. It's crazy how much my permanent marker plants have grown! They've really taken off. One's got these super cool purple stems, and the other's covered in buds – it's gonna be beautiful when they bloom.

7/3 So here we go with a new strain, this time I’ve prepared a growing bed so I can use all the space trying to achive a nice micro grow

I'm just giving them water until finish now. Not long left, I am checking the trichomes daily!

W16 (16-5 to 22-5) 16-5 Temperature: 25.4 degrees (lights on) 19.8 degrees (lights off) Humidity: 68% (highest) 48% (lowest) Watering: 1000 ml. 17-5 Temperature: 24.8 degrees (lights on) 20.1 degrees (lights off) Humidity: 69% (highest) 51% (lowest) Watering: None. No pictures. 18-5 Temperature: 25.1 degrees (lights on) 21.1 degrees (lights off) Humidity: 67% (highest) 42% (lowest) Watering: None. 19-5 Temperature: 25.7 degrees (lights on) 19.1 degrees (lights off) Humidity: 64% (highest) 44% (lowest) Watering: 1500 ml. No pictures. 20-5 Temperature: 25.8 degrees (lights on) 20.9 degrees (lights off) Humidity: 68% (highest) 45% (lowest) Watering: 1500 ml. 21-5 Temperature: 25.9 degrees (lights on) 20.6 degrees (lights off) Humidity: 67% (highest) 51% (lowest) Watering: 1000 ml. (Only with Silica and Calcium) 22-5 Temperature: 25.9 degrees (lights on) 19.6 degrees (lights off) Humidity: 68% (highest) 47% (lowest) Watering: None.

First week after flip Added 2nd light on 12/30 at 12" 100% LST taller stems to spread out wider Recommended 9.4" spacing drops ppfd in center. Moved 7" apart to get even 850 ppfd across 12/28-1/3 Jane log week 9

These all photos 3 of each

Fast Buds RF3 Auto Mixed Pack (4 of 5 random seeds) All of the plants are doing well. I pined down most of the branches and that’s made them spread out. All of them are starting to bud so I just started adding the bloom nutrient. The #4 plant is starting to stretch a bit. It’s Front Right. Still have no idea what varieties.

🤙🏾🤙🏾

The plant is drinking over 3 gallons of water every day. I’ve lowered the PPM’s to 600. Everything seems to be ok now. I will try to change the reservoir water every 5 days from now on. She started to smell amazing! Very lemony 🍋 P.S. Lowerd the TDS to 550 PPM on day 46. Also just realized that I stressed my plan with to much light. I moved the light at 13” and dimmed to 95% ... I will continue to dim it 2% every day...

Привет садоводы !!! Хотел уже срезать цветок , но так жаль такую красоту срезать И я решил подержать ее еще недельку Полюбуюсь еще такой красавицей Шишки у нее как камень оцень интересный экземпляр !!!

Switched to bloom nutes. The lowered screen has already filled up to the second level and filled in very nicely. About ready for autopilot.

Maaaaybe 2 more weeks ? Maybe 3 this thing is huge Turned the feed down a bit from 800ppm to 550 tips got burned a bit she seems to like it now

10 September Harvest - see pictures. While some growers leave the plant whole when they cut, I do not. It is a personal preference and situational convenience if your a home grower. I chose to cut large, long branches, and remove any whole water leaves, as long as it doesn’t interfere with the bud formation. I don’t trim yet. This is done for a few of reasons: 1) It’s my last good close-up look at her until another 5 days or more, 2) I don’t want wet leaves drying on my buds if I can help it, and 3) I occasionally like being able to shine a small LED flashlight on the flowers while its drying. Mold is our greatest problem as growers, it can destroy a beautiful grow right up until the end process. Then I hang it in a dark closet, provide circulation and ventilation. Light and heat, anything above 80 degrees F, will start a break down in cannabinoids during the dry, it is ideal to stay away from both. I’m fortunate that a humidity level of 50- 55% and temperature of 65-70 degrees F is fairly consistent and easy to maintain. Anything below 60 degree F will prevent the adequate drying out of chlorophyll. Almost all my flower routinely take 5-7 days, some a little longer, to properly dry out. 15 September Trim - see pictures. First you’ll notice the buds have shrunk up to half their original size. This is just a fact that we growers have to deal with. Due to evaporation without uptake of water, it takes about 3 days for the chlorophyll to dry up, then slowly go through a chemical change. Along with the leaves, cannabinoids also begin a chemical change after 3 days called decarboxylation. A slow process where the THC level increases while curing. You want the leaf to be dry so they can be hand trimmed easily, but you do not want that bud so dry that it starts to fall apart in your hand. Try to handle carefully by the main stem to avoid touching the bud all together. A lot of these cut leaves will be covered with trichomes, good for making oils, or other products, it’s an option worth looking into keeping it. After trimming, I do separate a few premium flowers for my first smoq. Then loosely fill wide mouth quart mason jars with about 1 oz/28 gr of product per jar. I seal the lids for a few hours to determine what relative humidity they are at, see hygrometer pic, before making a decision to put in a 62% humidity control pack of my choice or to wait, then place in secure in a cool dark place with stable humidity and temperature. It is very important to then observe/burp or exchange the air as needed, up to several times a day, until 62% rh is achieved. Once your close to to your mark, put in your desired RH level control terpene shield. If you have a problem getting there: 1) it has dried out too much, no real solution, try to put several large cut stems left over from harvest into the jars with the buds to try and increase humidty, 2) it has not dried out enough, in this case no problem, just remove and dry out a little more. This is also a personal choice, some people like it drier in the 50% plus range. Whatever you do, research and preserve. At that time burping is no longer required. Cannabis will reach its peak potency potential at about 40 or so days into the cure. The finished product should be a perfect grind when cured correctly without clogging up your grinder, this could take a month. Now that I’ve said that, I’m sure someone has grown something that they have not been able to grind. It can remain in this state for an easy 6 months with little change, locking in all the terpenes and potencies. All you need to do is occasionally check the product to ensure there are no molds. If your grow/harvest/cure techniques are good this should not be an issue. It would not be uncommon to find many cannabis strains will last, with small degradable change, for up to one year after being stored this way. Using an airtight glass container, controlled relative humidity, maintained low temperature, and kept in darkness will equal maximum shelf life. Always avoid direct sunlight and temperatures above 80 degrees F. The reasons I’ve ultimately chosen Deep Water Culture as a grow medium. Each has their own pros and cons indeed. I found the most efficient, less maintenance and ideal solution for my situation was DWC. Burdens to overcome depend on size up set-up; initial equipment cost, size of containers, ph monitors, air pumps, type of water to use-reverse osmosis, RO cost/set-up/maintenance, ways to transfer/change water and nutrients, what nutrients to use and schedules, takes several grows to learn and understand, a 1 year learning curv, easy to nutrient burn. The Benefits of growing in water; no dirt, no bugs, no diseases, rare nutrient deficiencies/toxicities, steady and rapid growth that enables the plant to reach its genetic potential. After harvest, there is about a 1 hour equipment cleanup, sterilization and turn around process before replanting. Cannabis will perform in so many different ways and mediums, no one way is the best and the best way is the one you are using, right. Chose what works for you in the long run. There will always be an initial cost in set-up. My advice if one were in need to cut corners, I would not recommend cheap lights. This single factor is the most critical, afford for the best. The notion that organic and water has a different taste, flavor and potency effect is absolutely debatable. The more we learn the better we grow and experience is always the best teacher. This is what works for me and my methods of growing in general from beginning to end. A BIG “Thank You” to everyone who stopped by to take a look. My next diary will start at the beginning of October 2023 with a Forbidden Runtz Auto. There will be minor differences during the grow. I enjoy Auto strains simply by what can be achieved in a short time. No matter the strain they will unveil one thing in common, the demand for attention. Many times over it is the anecdotal gardener that surmount plant scientist. Last should I mention, do not forget to stop and enjoy the fruits of your labour...

She receive the final part this week and nest week she will be flushed and harvested