Likes
Comments
Share
Moved everyone in the grow setup. Put under a MH for a couple nights before switching over the 600W HPS. Going great! End of first week of 12/12 and already showing pre-flower. Slowing transitioning from veg nuts to flower. Keeping a slightly higher N ratio during the stretch
Likes
181
Share
🍼Greenhouse Feeding BioGrow & Bio Bloom 🌱GARDEN OF GREEN SEEDS ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000)
Processing
Likes
9
Share
This week was good, trying to give transiting plant as much light expo. as possible......also removed most of the smaller bud site........the one that is in full flower mood is super healthy n green gonna start packing size from next week on a (k) diet
Likes
14
Share
D29/V25 - 29/04/23 - Benting D30/V26 - 30/04/23 - EC 0.9 pH 6.5 D31/V27 - 01/05/23 - LST and Benting D32/V28 - 02/05/23 - Some other LST D33/V29 - 03/05/23 - Added water and nutes - EC=0,9 pH=6,5 D34/V30 - 04/05/23 - LST D35/V31 - 05/05/23 - Nothing
Likes
7
Share
Overall I was happy with this strain and I did not have many problems growing. Plant was healthy for the entire grow with little to no signs of deficiencies. The only issue I had with the plant was it started sprouting a good amount of nanners the last few weeks of flower. I was able to pull them all off with tweezers, so now I just need to hope they didn't pollinate any of the other plants. Still need to dry for another two weeks, so I will provide a smoke report at that point. The plant is loud and still has that sweet funk. Excited to smoke it. I will be drying at 60° and 60% RH for 12 to 16 days. 12/28/2022: day 10 of drying at 60° and 60% RH. Smallest branches are starting to snap, but most of the main branches are not providing a noticable cracking sound yet. Buds are a little on the airy side, from what I can tell, but I'll provide a final update once trimmed. 1/2/2023: started trimming today, which is day 15 at 60° and 60% RH 1/4/2022: finished trimming and totaled 84 grams, so just under 3 oz. I know I said earlier the bud was a little airy, but I must have grabbed some lowers. Not the densest ever, but pretty nice nugs. Found some additional nanners I missed, but no seeds so far. Pretty happy with the results.
Likes
9
Share
@Peace59
Follow
Tout va pour le mieux ! Il reste une bonne semaine pour la strawberry gorilla avant la récolte ; j ai commencé le rinçage. Il doit rester environ deux semaines pour sherbet et un peu plus pour la gorilla cookies je pense. Grosse chaleur prévu en début de cette nouvelle semaine, jusqu’à 40 degré Celsius. Les trois dégagent de magnifiques odeurs !
Processing
Likes
14
Share
@Toughpuff
Follow
Care Bears was an awesome plant to grow, it grew fairly smaller but massive colas on the whole plants. The fruity smells that come off this plant is amazing but also has a hint of that good old dank smell, awesome purple/pinkish colours off of it . Highly recommend growing this strain is you haven’t already. Breed by: firebuds genetics
Likes
17
Share
Likes
18
Share
@valiotoro
Follow
Hello everyone week 2 of flower has passed for this Vanilla Latte auto 🍼 Same feeding schedule Mars hydro FC-E6500 75% have a great day and wish you all happy growing 😎👨‍🌾🏻
Likes
23
Share
Actual day 37 flowering today : After a screw up on weeks and missing 1 totally !!!. I am now on track correctly The Gorilla girls continue to be amazing and look beautiful close up. Buds are so sokid and heavy too. her smell is so candy/fruity and they are starting their second burst now. I am looking forward to sampling these ladies so much.
Likes
8
Share
Discovered spider mites on a lower leaf (as you can see on last photo) I carefully removed and burned this leave and after a long, thorough search I did not discover 1 other affected leaf. Better safe than sorry so I again ordered some bugs to eat the spider mites!
Likes
13
Share
Partially drained the tank at the start of the week and topped up with ro water and 1ml of final solution per Litre. Last 2.5 days were in darkness. I trimmed the majority of fan leaves before hanging up to dry in the tent today. Started out trimming with the plants in the tent and soon realised it would be much easier to just cut them down whole, hang them upside down outside the tent and trim them up a bit. I have a small dehumidifier and a small fan heater setup in the tent and they have been keeping a humidity level of about 60% and a temp of 16 Celsius for the last few days while the lights have been off. I figure that's a good starting point for drying and I can increase the temperature if needed, that will drop the humidity also. Intake fan at the bottom and extract fan at the top are running constantly as they have been since the grow started (low power 4" fans). I might add back in a fan for circulation depending on how the drying goes, or maybe even trim or hang the plants better to get more airflow around the buds
Likes
14
Share
@DTHEREID
Follow
Wow! Hard to believe these are autoflowers, I’ve never harvested a cola off an autoflower quite this robust. The hps lights in the 2nd grow room were maybe a bit much and all the plants handled it differently. The big beast is one that did very nicely under the hps lights. The smaller much more frostier dried bud is from the mars hydro ts1000 grow tent. Not nearly the yield or density but beautiful crystal covering the buds. Amazing colour from both the led grow dark devils and the hps ones.
Likes
22
Share
1/11/2024 Vegetation Week 1 Day 1- I have a root almost in the water.. Yay!! Top feeding is almost done. she is looking a little sad as I work the transition Top feeding but once the roots are fully in the water she will start to take off. Ensured my PPFD is set between 250-300 it is set to: 258 1/12/2024 Vegetation Week 1 Day 2- I have a root in the water.... NO TOP FEED TODAY SIR!!! now that a root is touching the water and she looks stable, I am not going to topfeed, I will see how she looks tomorrow and as long as everything looks good I am going to go ahead and do a change and week 1 fill on Nutes.. I know it is a couple of days in but the same Nutes go through Week 2 and get changed at Week 3 So I should be good to go.. I will just ensure I fill to root touching the water when I change tomorrow. 1/13/2024 Vegetation Week 1 Day 3- Water Change Day!! I added 36 Gallons of Water to the system: Silica= .5mil/gal= 18mil CalMag= .75mil/gal = 27mil FloraMicro=3.0mil/gal = 108mil FloraGro=2.0mil/gal = 72mil FloraBloom= 2.0mil/gal = 72mil PH DOWN= 30mil Very important thing with this system is to now wait the 24 hours for the system to adjust.. Do not make any further adjustments to your PH up or Down for 24 hours to allow time for the system to balance. 1/14/2024 Vegetation Week 1 Day 4- Today I just adjusted the PH to ensure that it was right at 6.0 1/15/2024 Vegetation Week 1 Day 5- Today I Cleaned up the lower damaged leaves from the transition from top feeding to roots in the water. She looks good today. 1/16/2024 Vegetation Week 1 Day 6- Today I just took a picture of the beautiful lady for Log. Other than that just normal day to day operations, check the pH, check the Humidifiers and fill as necessary, check level of water in the Res. Everything looks great. onto Tomorrow!! 1/17/2024 Vegetation Week 1 Day 7- Today I filled the humidifers, checked the PH and just let her grow.. Grow baby Grow.....
Likes
65
Share
@Dendegrow
Follow
Welcome to week six! 🌱 Week five was a complete success – all parameters are perfectly aligned. I’ve increased the water conductivity to a solid 3000 and bumped the CO2 level up to 1200 🌿. Light intensity is now set at 1400 µmol in the center and 1000 at the edges, which will keep the plants strong in their generative state 🌞. I’ll maintain these levels until the end of the third week and then start slowly removing the large fan leaves to ensure the buds get plenty of light 💡✨. I’m also trying something new to activate the “Emerson effect” 🌄: I’m running the deep red lights for 5 minutes before sunset and for another 5 minutes after the day ends. This should give the plants a final boost in photosynthesis, helping to maximize their growth potential! Everything’s looking fantastic so far! The Black Cherry has rooted well across different experimental setups, and at the end of the grow, I’ll provide a full report on the best care techniques for both strains 🌺👌. Willkommen in Woche sechs! 🌱 Die fünfte Woche lief perfekt – alle Parameter stimmen. Ich habe die Leitfähigkeit des Wassers auf satte 3000 erhöht und den CO2-Gehalt auf 1200 angehoben 🌿. Die Lichtstärke beträgt jetzt 1400 µmol in der Mitte und 1000 am Rand, was dafür sorgen wird, dass die Pflanzen stark im generativen Zustand bleiben 🌞. Ich werde diese Werte bis Ende der dritten Woche beibehalten und dann langsam damit beginnen, die großen Sonnensegel zu entfernen, damit die Blüten ordentlich Licht abkriegen 💡✨. Zusätzlich probiere ich etwas Neues aus, um den „Emerson-Effekt“ zu aktivieren 🌄: Ich lasse das tiefrote Licht 5 Minuten vor Sonnenuntergang und 5 Minuten nach dem Ende des Tages weiterlaufen. Das sollte der Photosynthese einen letzten Schub geben und das Wachstum der Pflanzen maximal fördern! Bis jetzt sieht alles fantastisch aus! Die Black Cherry ist in verschiedenen Versuchsreihen gut angewachsen, und am Ende des Grows werde ich einen ausführlichen Bericht darüber abgeben, wie sich die beiden Sorten am besten pflegen lassen 🌺👌.
Likes
13
Share
Die letzte Woche hat angefangen. In 5 Tagen werde ich sie 2 Tage Komplett im Dunkeln lassen. Ich freue mich schon auf das Ergebnis 🤤