Likes
Comments
Share
stopped feeding the plants nutrients let them flush for the final few weeks.
Likes
4
Share
Going well gonna end up transplanting sometime this week or next week just trying to give it some time to recover from the topping in the added nutrients. Just want to see how she’s going
Likes
25
Share
Showtime... we are officially in flower watch these girls push out bud sites like crazy.... adjusting the temps and trying to keep them consistent is key from this point on wish me luck
Likes
9
Share
Gracias la equipo de Super Sativa Seeds Club, Marshydro y XpertNutrients sin ellos esto no seria posible 💐🍁 Lava Freeze: Con el nuevo cruce de Friesland Indica (M33 para los cultivadores de la vieja escuela) con Lava Cake, ha nacido una nueva híbrida muy sabrosa que te pega fuerte y te deja colocado. En su día, la Friesland Indica original, alias M33, alias Freezeland, se hizo inmensamente popular en América del Norte. En Canadá, se convirtió inmediatamente en una joya entre los expertos de semillas de cannabis. Fue elogiada por su productividad, su efecto y su increíble sabor. Friesland Indica era también muy robusta y capaz de soportar bien el duro clima exterior de Canadá. Esto la convirtió en una variedad recurrente para muchos cultivadores comerciales clandestinos canadienses y todavía se puede encontrar hoy en día en muchas salas de cultivo canadienses. 🚀🌻 Consigue aquí tus semillas: https://dutch-passion.com/es/semillas-de-marihuana/lava-freeze 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 5: Una vez terminada la fase de estiramiento dedican todo su esfuerzo a crear nuevos pistilos y resina, es hora de engordar estos futuros cogollos. La carpa esta totalmente cubierta gracias al FC-6500 y los Adlite de Marshydro, se nota la floración mas avanzada que otras veces y con una mayor densidad. Continuo con las dosis de nutrientes recomendadas por XpertNutrients.
Processing
Likes
27
Share
@Dunk_Junk
Follow
5.5cm of growth from her this week!! Roots are getting more prominent too. Still have no idea what I'm doing 😂
Likes
13
Share
Este vídeo fue grabado tres días antes del cambio a 12h y el cambio de malla. Lo siento por la calidad del vídeo pero es con el móvil y el led no ayuda mucho. La 8 ball se diferencia de las otras tres por la maceta y aquí todavía es más alta que las otras...aunque no por mucho..
Likes
14
Share
Week 10 Gorilla Cookies Auto (Fast Buds) Keep getting fatter Week 10....5 week of flowering (73 days) It has 64 centimeters 16L This Week - Defoliation- Godzilla Cookies (Herbies) Keep getting fatter Week 9 Week 3 week of flowering (63 days) It has 71 centimeters 15L This Week - Defoliation Gorilla Glue Auto (Herbies) It has 25 centimeters 6 Week...1 Week of flowering (38 days) This Week - LST - Defoliation
Likes
11
Share
@PanGrower
Follow
Do not pay attention to the temperature on the thermometer in the middle, it lies by a couple of degrees. I have a good thermometer on top of the box that shows the temperature. Day 29: After a terrible fracture, we see that the plant is beginning to recover. I'm honestly disappointed because it makes it very difficult for me to train mainlining and it will also increase the amount of time it takes to grow. Day 30: It looks much better already, I could superprune the right branch, but I don't want to stress it. I will try to bend the right branch harder, I will bend the left one a little in the morning the next day, maybe early. Day 31: This morning I cut the lower leaves, photo in the evening and continued the LST training after the injury. Photo in the evening. Day 32: I am completely sure that the plant has moved away from the stress, but we can see on the left circle, the right bud (and side) slowed growth. Day 34: I saw traces of salt on the tips of the new leaves, so now I pour water with regular 15 PPM.
Likes
7
Share
Greetings and salutations GD peeps. Let the peaceful transition of flower begin! It is the first week of flower and the scrog is filling out nicely. I had some issues with a GFI popping and my lights would miss a few hours in the 18/6 light shedule over the last week. Rather than stress them any more than they already have been with the mini blackouts I flipped them to flower this week. I also changed the circuit the Tent was on and it seems to be consistent. A massive feeding this week for early flower, I bumped the bloom by 2 ml/gal on top of the normal feeding chart. My rational is I have topped these ladies and there are far more bud sites than before, will see if it has any effect + or - I have also done some selective defoliation to promote light pentation to the lower bud sites that have branched out from the topping 2 weeks ago. I have a small number of LEDs on one of my lights that have stopped working. The light an older amazon Chinese cheap O has 85% of the lights working. My footprint of the tent to the w/sqft is with in range. I have read and heard 35-50 watts per square foot of area as a general rule is good. now you can get in to PAR and lumens etc. but that's a whole different conversation. The light might be why the GFI was popping? I will figure that out after the grow. for now its all about FLOWER POWER and the scrog fulfilling its destiny. peace ya'll be kind to your fellow humans and hybrids.
Likes
40
Share
Growing Fast Finally. Almost Ready to cut few clones for friends! One friends lend me his growlush 600w Veg Led Light. 2.7umol 247 watt use. Cruising Nicely!💪
Likes
21
Share
Alright I've updated this postmortem and cure just to give an idea of what I was up to during the dry and cure weeks. This grow was a ton of work and I'm very please with the results. I learned a ton about soil and environment control and really feel like I'm gaining confidence and coming into my own as a cultivator. I've been playing a lot with ice water hash and rosin and have set some neat goals for the future like hunting ice water hash cultivars, going perpetual and expanding the amount of canopy I can work with by building a network of remote-operated satellite flower tents in friends' and family's abodes . I'm not sure I'll go through all this effort of documentation here again, but please follow along on my instagram, stay in touch and chill out with me sometime @Fullmeltalchemist.00 All in all, I was running 1000w of quantum board across three tents and pulled just over 1100 grams, which was a big goal of mine. Thanks for all the advice and love growmies! And thanks growdiaries for the platform. It's been coo.
Likes
18
Share
June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.
Likes
6
Share
Hallo zusammen 🤙. Sschön und macht keine Probleme.
Likes
119
Share
@Roberts
Follow
Divine indica is growing great. She took to the topping well. Lots of new growth and she took well to being switched over to the SE3000. Her ph has been fairly stable. It slowly has tried to climb, which works great. Everything has been going good. I am gonna continue to lst the 6 branches outwards as far as I can. Depending on how fast she grows, I may switch her to flowering in 2 to 3 weeks. Thank you Divine Seeds, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Processing
Likes
8
Share
Looking great going into day 8!!! No nutes just plain tap water!
Likes
7
Share
So this week i Can only enjoy how much she's growing. I had to do some more defoliation on day 23. I surely should defoliate way more but wanted to try like this. On day 25 , I just enjoy the view of that Wonderful plant😊
Likes
46
Share
Die feminisierten stehen kurz vor Beginn der Blüte und wachsen immer langsamer in die breite. Critical Auto ist fast fertig. Noch ein paar Tage (gutes Wetter ist angesagt) und dann wird auch sie geerntet. Creamatic ist geerntet und trocken mit 23g besser im ertrag als erwartet. Es läuft gut 👍 Bis nächste Woche ✌️
Likes
6
Share
@Nedizzle
Follow
Day 64: one day before harvest. The look fine and smell strong. I will do another set of pictures and video with daylight. Easy grow after three defoliations and lollipopping. See you in two weeks 🍁🌌