Heavy defoliation the day before the photos were taken. Will leave alone now to stack and mature for a month. Feed regularly. *(If anyone has seen the little blue heater that I use in the room in one of the photos or videos, I noticed a tiny LED on the side. Since it was daylight when I tested the heater and it's so small, hadn't noticed that it turns on when the heater is activated. It is red and I think that it's intermittent off/on/off during flowering was having an effect on the plants on the right side where the light is. Put duct tape over the light and hopefully, that's that, although if the element inside glows red and lights up the room, I may have to deal with it).

13/06/25: Last week of these autos in the grow box, weather is clearing up and they will move outside soon! The Plan to give them a little jumpstart in the early veg is coming together nicely and they took the repotting like nothing at all! 14/06/25: vigorous growth. 3 days since repot; and i can already see roots at the drainage holes, insane! 17/06/25: Started hardening off by putting the plants outside in the evening (6 - 8pm) ☀️ 18/06/25: Hardening off from 4 -8pm, and I could already see the first pistils at the top nodes...tbh honest I hoped to get a few more days or even an extra week of veg but stretch is already incoming! 😔 I directly Repotted to ~13 L per plant and put some extra perlite into the final soil so I can get some decent roots on these ladies! I guess we learn as we grow 19/06/25: Today they got direct Sun from 2 - 6 pm and will stay outdoors from now on!

Saliendo ya flores como llemas de dedos y dirijiendo las ramas al sol que es una terraza y da el sol solo a un lado y hay van los se ven muy bien y estan creciendo muy contentas son 3 critical

Germination date 🌱 12/07/2021 Day 57 09/09/2021 Strain 🍁 SinCity seeds YUZU SORBET (Purple yuzu x whitenightmare) THC% • Unknown 💡 Mars Hydro FC4800 • Power draw 480W + 5% • Max coverage 5 x 5 • LED 2070pcsSamsungLM30B1&Osram660nm • Max Yield 2.5g / watt • Noise level 0 DB • Removable Driver +2m cable • Daisy chain (multiple lights) https://marshydroled.co.uk/products/mars-hydro-fc-4800-led-grow-light-samsunglm301b-commercial-greenhouse-medical-indoor-kit 🇬🇧 https://www.mars-hydro.com/buy-fc-4800-480w-4x4-energy-saving-full-spectrum-commercial-led-grow-light-mars-hydro-for-sale 🇺🇸 PROMO CODE • (ORG420) DISCOUNT 👍🏻 marshydroled.com ⛺ Mars Hydro 120 x 120 x 200cm 📤📥 AC infinity 6inch 💧 10lt dehumidifier ❄️ 3.1kw air con system 💉 Nutrients GreenBuzzLiquids Organic Grow Liquid • 1-4ml until 2wk flower Organic Bloom Liquid • 2-4ml flower stage Organic More PK • 2-4ml +wk3 of flower Organic Calmag • 1-2ml/lt whole grow Fast Plants Spray • first 3days at night lights off More Roots • 2-5ml veg +2wks flower Fast Buds • 5ml +wk2 of veg until 1wk flower Humic Acid Plus • 2-5ml whole grow Growzyme • 2-5ml whole grow Big Fruits • 2-5ml flower stage Clean Fruits • 5ml flush 1wk Ph powder Root Gel Living Organics PROMO CODE • organicnature420 15% off ✌️🏼 https://greenbuzzliquids.com/ 🥥 Growing Media • Coco Coir Notes 📝 The only one showing leaf damage. Not entirely sure what it is but doesn't seem to effecting plant growth or the other 3. Been taking off any leafs with brown spots on and to be fair its been minimal 3 or 4 at most. Did see some small fruit flys In the room so will have to give the room a spray down. Apart from that the girls are looking healthy. Lights been turned upto %75 for week 2 of flower so will see how it goes 👍🏻💡 .. girls loving the light well happy with the FC4800.. energy saving compared to the spiderfarmer. I was running spiderfarmer full power by end of veg and that was around 440w from the wall. The FC4800 has only been pulling half of that from the wall and even now at %75 is still only running 360watts.. money saver and Plants are looking beast. Nutrients are killing it, no problems at all. This is only my 2nd coco grow and 1st with this Nutrient company. Brilliant community with greenbuzz, help always at hand if you need it 👍🏻 massive thanks to both company's for letting me try out their products 💚💡💉 Happy growing fam ❤️🌱🍁👍🏻

Oct.29 - We transplanted the girls into soil since they are moving into vegetation phase Nov.4 - Watered each plant 250mL, 0.25mL of each nutrient for each girl

So this small plant turned out pretty bushy, she got dark of the 1000ppm and now the buds will get huge real soon

Last week of veg for this round, next Monday they will start 12/12 in the flower room and get stripped. Watering daily and they are growing fast and looking great, can't wait to see how flower goes for these ladies.

This week they are all just putting on some weight still a few weeks left to go. Pics were taken on Monday video on Tuesday. The aromas are pretty strong in the tent in general. This one is finishing up pretty quick I'll start lowering ppm soon.

Feb.9 Diy Growbox: 60*60*160 cm Light: 150w led Light Cycle: 12/12 Soil: CocoPerlite in diy Hydrobucket Extractor: 120mm PC vent Running 24/7 Dear Growdiary, Had to find out how to calibrate Ph meter, stupid manual didn't say how get next Ph setting. Found out on Youtube, Thanks to all tutorial uploaders 👍 Day62: Feeding 780ppm @ 6.14Ph 4L Drainwater 169ppm @ 6.50Ph Day65: Bucket seems to dry up fast Water 2L added

I am constantly feed this girl and she constantly shows signs of nitrogen/magnesium deficiency. She is a feeding machine. I am going to try and up it somewhat as she is showing more defficency. Never the less she is coping well, still recovering from leaf burn but everything appears to be OK at this minute.

another resin monster from seedstockers, with a very special scent, full of flavors! grinded it smelled like peppermint, and vaped it has a great sweet creamy taste!

************** 13.03. Day 1 ************** 🤞🏼😎 I have new cuttings. Sour Frootz from Karma Genetics. I planted the cuttings in 0.2 L pots. I only applied fertilizer to the large pot. So Let’s grow again 💚💯 ******************************************* 18.03. Day 6 sprinkled with bactrex and transferred into the large pots *******************************************

I grew 3 plants 2 grew well but stalled due to water and lighting at back of a cold tent once this was sorted all grew within there height range which is small and compact with my 6.5 liter pot range 8n biobizz all mix with mycorrhizal added. This is my first ever grow and the genetics wowed me i took a lot of info in about autoflowering plants and the 2 main things that run true are pot size and reduce feed as autoFlowering plants need less due to restricted height although I saw amazing growth in 3rd -6 weeks this if you dial in could increase your yields. The plants had a mild floral berry smell during early stages and kept this smell allways through. Once in bloom they grew vigours and buds oozed resin . There colour are truly amazing I have 2 dark plants that changed colours! And 1 tall lilac plant that too on its amazing colour during late Flowering planted in cold weather these came through sweet looking. Final weight on last plant #2 dry buds in sugar leaf I leave on is 12.6 grams there still 2 lower branches I've tried to seed with her hermI pollen

This week everything remains stable with no significant changes. The plant continues developing well, so I’m just maintaining the current conditions and letting her do her thing 🌸💪

She is sticky! She is stinky! She may have another week left 😂

Hi growers! It's been 5 weeks since we entered the flowering stage, and our plants are in full bloom! The branches have become thick, the leaves remain green, and the buds are getting fuller by the day. We continue to feed our plants with Xpert Nutrients flowering fertilizer, and the results are simply amazing! Our girl clearly loves this fertilizer, and we couldn't be happier with its effectiveness. A big thank you to Xpert Nutrients for such an amazing fertilizer! We're continuing our exciting journey and looking forward to new successes and beautiful harvests!

Last week! Next one It will be dried.

Pretty easy first grow, with a lot learnt along the way for next time. I believe not defoliating enough and overfeeding the nitrogen in flower hurt the bud density in the end, but I'm more than happy with the returns and as its vape use, dense flower is less important to me.