Likes
3
Share
@DoctorP
Follow
looking well but i think she could have a little more resin production at this stage, currently going in to week 6. any tips would be helpful, im already pumping co2 in there above the plant so it falls down, under a 200w attis lumatek led. (will upgrade next grow) ... the old co2 pack behind the plant is empty and old just not removed 🤣 thanks :)
Likes
19
Share
@Chubbs
Follow
420 Fastbuds FBT2306 Week 3 Merry Christmas Grow fam. Week 3 for these beautiful plants. I upped the feeding to 1000ml every other day and so far seem to be handling it fine. Will do a mild defoliation this coming week removing the lower leafs at soil level. All in all Happy Growing
Likes
15
Share
🌸 Week 10 – Gorilla Cookies Auto Pheno Hunt Another week has passed, and the girls continue to impress with their flower development. 🌸🔥 The canopy is filling out nicely, and every pheno is putting more energy into building bigger, denser buds. It's exciting to see how each phenotype is expressing its own unique characteristics as flowering progresses. 📈 Current observations: Bud development has been excellent across all six phenos. We performed another lollipopping session and removed additional fan leaves to improve light penetration and airflow around the buds. The canopy is much more open now, allowing the lower flower sites to receive more direct light. Pheno #6 continues to surprise me. Even though it was the slowest plant in the beginning, it is now steadily developing its flowers and catching up nicely. Pheno #4 is already showing a very unique terpene profile. It has an incredibly sweet aroma with strong Kush-like notes, making it one of the most exciting phenos so far. 📊 Current environment: Temperature: 31°C Relative Humidity: 63% VPD: ~1.66 kPa SANlight fixture at maximum height Light intensity: 90% 🌿 Looking ahead: The plants are now entering one of the most exciting stages of the grow. Over the next few weeks, the flowers should continue to swell, resin production will increase, and the terpene profiles will become even more pronounced. I'm really looking forward to seeing which phenotype delivers the best combination of structure, aroma, and overall flower quality. 💬 Which pheno would you keep as a mother based on what you've seen so far?
Likes
2
Share
@gobigdale
Follow
They are starting to get more comfortable now so I turned the AutoPots on. They took right to this and watering became so much easier.
Likes
31
Share
DAY 16 At the begenning oh 3th week we can see one twins is littel bigger and we can see the leaf dimension in the picture. I think that i had some problem with fertilizazion becuse i see one leaf crumpling and in the border of two leaf some sign of overfert. i think overfert because i have used water with ph 6.2.......look at the picture......At day 16 i watered only with water ph 6.2 for security of my plant. what do you thing about these sign on leaf? certainly i will do flushing when i switch in bloom phase at the end of this week. DAY 18 VIDEO Look at the video for see how grow very fast and hard my Twins!! I'm very happy for this!!! Now they are 17 cm tall and tomorrow I switch them in the bloom stage. Happy growing for all 🙏 GGG
Likes
3
Share
@BLAZED
Follow
Week 4 (8-7 to 14-7) 8-7 Temps: 20.7 to 26.1 degrees Humidity: 49% to 57% 9-7 Temps: 22.2 to 27.5 degrees Humidity: 52% to 65% 10-7 Temps: 22.8 to 27.4 degrees Humidity: 51% to 65% 11-7 Temps: 22.2 to 25.9 degrees Humidity: 47% to 56% 12-7 Temps: 19.9 to 25.9 degrees Humidity: 47% to 62% Watering: Both 1000 ml. 13-7 Temps: 19.9 to 25.1 degrees Humidity: 47% to 60% 14-7 Temps: 19.9 to 26.6 degrees Humidity: 45% to 60% Watering: Both 1000 ml. Today i topped both plants! Light set to 60% strength with a distance of 60 cm.
Likes
6
Share
Likes
Comments
Share
Likes
8
Share
Hello everyone! I promised to track this grow very closely this time and ufortunately life got in the way. Here is a quick sumup of the grow. First of all- One of the sour stomper plants unfortunately didn't make it. It died at about week 4. The main stem somehow had rubbed/broken down. That's why it was falling down. It was almost like a mini beaver had chewed it off at the point where the stem touches the riot rooter. At first I thought nothing much of it, maybe it hasn't been rooted in quite well yet or something. And I was constantly touiching it when watering, that made it worse. Soo the leaves were dropping and the plant looked very weak. Then I decided cut thr rapid rooters top layer and found out the severity of the problem. Tried to tape it up and other things, but it was too late. At the end it appeared all good as the remaing plants got so big the I had some space issue so I wouldn't have been able to fit another plant in anyway. At that time I finally made my self-draining saucers. I took me a while and a lot of effort, but finally they were ready and working well. I also installed the self watering system and flowering was starting. Pretty soon I started noticing weird leaf symtoms. Brown spots, different kind. Some plants had it more, some less. Sour Stomper looked pretty good throughout the grow. Mango smiles seemed sensitive and Strawberry Nuggs were pretty strong until the end. The grow was basically me experimenting with the setup- changing watering schedules , changing ppm, ph and all that stuff to keep the leaves looking healthy and it was very hard I have to admit. Probably my hardest grow in that regard. But somehow, the bud leaves remained healthy and the buds really fattened up good. I got away with an amzing 700G dry bud harvest which was def a new record from one grow. And the bud quality is very good too! Next time definetly no more than 4 plants as they got pretty big and I thought it was a little overcrowded. I was doing some good defoliation too. I should have defolited strawberry nugs more tho. Sour Stomper got some amazing bud development from top to bottom because it was was growing next to strawberry nuggets which were really small most of the grow. They actually took the most time to harvest even longer than Mango smile. Mango smiles were ready quite early. Sour Stomper was just in time! I topped sour stomper and both Mangoi smiles, left SNs both normal. Looking back at it, the way I grow them, Should have topped SNs too. Would probably have more space in the middle and longer side branches. Probably wouldn't have been as bushy! I followed the full Terra aquatica feed chart until the end. I was supplementing with CalMag a lot as I thought the symptoms could have been from a CalMag deficiency as this was my first grow with RO water. Overall a very challenging but good grow at the end. First time no mold problems. A record breaking yield for me. Basically surpassed the upper limit for all plant probable harvest sizes. Got good smelling quality bud. Very happy overall and will continue experimenting with Mephisto beans in the future for sure! I guess what I like the most about Mephisto is how close to description the plant is, very stable genes in that regard. Next time I will also have to start feeding plants higher PPM feed faster at the very start. and during flowering. But still not 100% sure what caused the leaf symptoms.
Processing
Likes
11
Share
@Magich
Follow
Ok, so day 46, i see a lot of “hairs” turning dark/brown/yellow, so i gave it fresh water no nutes. But it is only the top buds, so maybe i will feed 1-2 times more before flushing. Thats for lsd-25. blueberries, on the other hand needs more time. Day 47: very beautiful colours, and the sweetest smell ❤️
Likes
8
Share
@Fyno_TH
Follow
🌸 Flowering Week 5 — Solo Queen Still Standing 👑 Tough week but the mission continues 🌿💪 One plant didn’t make it earlier, so now all focus goes to the remaining Queen. She’s holding up strong — stacking dense buds and shining beautifully under the Spider Farmer G3000 💡 Switched fully to Athena Bloom (2 ml/L) after running out of Florex, and it’s working great so far — tighter buds, stronger pistil growth, and that classic King’s Juice aroma starting to roll in 🍊✨ Feed (per L): • Corex – 1 ml • Mira – 0.5 ml (pH adjust) • Aurora – 1 ml • Oxyroot – 1.5 ml • Bud Candy – 2 ml • Terpinator – 5 ml/gal (~1.3 ml/L) • Athena Bloom – 2 ml 💧 ~15 L each with 10–20 % runoff ⚗️ PPM: 1760 | EC: 3.5 | pH: 6.0 🌡️ Temp: 26–28 °C (day) / 23 °C (night) 💧 RH: 45–50 %
Likes
45
Share
DWC stripped to the wood no suckers only AAAA quality buds I’m looking for especially if she’s a leafier bud. It’ll be a challenge keeping her in Veg any longer but still looking at minimum two week before she sees the flower tent. Week 7 Flower, frosty, smells great, she really puts on the weight late flower so it’ll be interesting to see where she stops.
Processing
Likes
142
Share
Hey everyone :-). There is not much to tell this week :) A few came to the flowering tent, 2 are still in the vegi phase for 2 days and then come last to the flowering tent :-) The Blue Cheese and the Kosher Tangie Kush smell very good and how they should 😍👍 It will be difficult to choose 2 mums :-). I wish everyone a nice week 👌 Let it grow
Likes
9
Share
KICKASS AUTO by KANNABIA Week #10 Week #4 Flower This week no issues to report being outside as she continues to flower. Her buds are getting thicker by the week and the trichome coverage is looking good she's getting frosty!! Stay Growing!! Kannabia.com KICKASS AUTO
Likes
2
Share
@Autower
Follow
Harvest time didn’t get single photos but here’s the lot one plant on each line 5 plants in total Going from the back first: Somango Bubba cheese 1 Bubba cheese 2 Dos si dos Banana punch will upload dry weight of each plant once done don’t do wet weight don’t see the point all goes on the end weight for me thanks for viewing and happy growing and have a good day
Likes
15
Share
Welcome to Flower Week 5 of Kannabia Clementine Slush BioBoost Edition Need a Fail-Safe Germination and Express Flowering?Kannabia Makes It Easy with BioBoost, Sproutly and Its Fast Genetics . More informations to find at The Kannabia Blog on GrowDiaries. Check out Kannabia Seeds with my link [https://www.kannabia.com/de?ref=61966] and grab the germination device or the strains I used . Trust me – it’s worth it for sure ! Get another 20% Discount at all products using the code [GGD] at the checkout For this Project , I’ve chosen the Feminized Photo Strain Clementine Slush BioBoost : Here’s what I’m working with: • 🌱 Tent: 225x150x150 • 🧑‍🌾 Breeder Company: Kannabia Seeds • 💧 Humidity Range: 45 • ⏳ Flowering Time: 65 Days • Strain Info: 21%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 20 • Nutrient Brand: Hy-Pro • ⚡ Lights : 600W x 2 A huge thank you to Kannabia Seeds for allowing me to try my Best with this amazing collection from Photo Strains they managed to Sponsore . Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!
Likes
23
Share
Really happy to harvest this girl. Made sure I pushed her to the max. Just about 70 days. She was done around 65. 14hrs into pre fower and beyond. I find that with High ppf with less hrs. Makes for much better phenos. Really happy to say. This is SUCH A 100% TOP strain. And it'll be 500% a auto that I'll repeat Mind you I've hardly ever repeated any strains. Except mimosa X orange punch auto and super lemon haze. And a few CBDs. So, if anything that should speak volumes to me saying this is a tip top strain. Going to run her with one of their new autos, apple strudel is meant to have very high terps. All about the taste. And this Apricot Auto from Fastbuds has this in spades.