The Grow Awards 2026 🏆
Processing
Likes
Comments
Share
Hello everyone... my first photoperiod is going well ... even if it's still very hot she is a tough girl! who knows how long this blessed bloom will last .... ahhh I would like to see some nice dense buds in my hands already! when I die they will bury me with a ton of weed! good harvest to all, my brothers!
Likes
1
Share
@Dabcik
Follow
Piante sane, continuano a crescere bene. Le pink poochie si sviluppano chiaramente in altezza mentre tutte le altre hanno un aspetto cespuglioso Ho defogliato un po’ e tolto i rami più deboli durante la settimana Aperto i rami con lst
Likes
1
Share
I fucked up drying. Room RH is 80% plus but I had fans running.. usually, locally, I cant get my dries to go longer than 3 - 5 days.. been drying for 5 days but with the humidity being at 80% - 85% inside the lung room and tent she hasnt even began to dry. Plus, I havent been able to trim her up yet.. just been jiggling the jar around a few times a day and keeping the jar open, inside the tent with an exhaust fan running and another usb fan moving air.. but not blowing on the buds at all.. but around the jar.. so nervous to get mold!!! Drying still.. but day 3 in jar.. She is still way too wet to be jarred. I have just been shaking the jar around like 4 times a day MINIMUM and keep the jar in he tent with air flow.. humidity is still being a butthead.. but easing up a bit.. down to 70%-ish.. when I do seal the jars, it still reads a little over 70%.. I will keep doing this until I get to about 65% or possibly even as high as 68%.. as long as I keep up the burping.. but so far, I just leave the lid open and keep it in the tent with a couple fans running.. no mold, so she should be good.. still gonna keep flipping the buds a few times a day.. this is going to be some DANK! already tried a few nugs.. still alot of chlorophyll, but she is slowly getting to the cure zone!!! Drying day 14.. Finally got the jar down to 65% RH.. that took alot of rolling the jar (to move buds around).. at least 4 - 5 times daily for this entire time I trimmed the buds and put them into the jar waaaay too early.. no mold tho.. and the buds dont tear apart anymore. They should start to crumble (kinda) in the next 2 - 4 weeks.. but going to see how things (including weather) are going to go if I only burp once or twice daily. I kinda want to bring the RH down a bit still.. like 62% 🤔 ah shit, I'm so indecisive lol.. probably leave it at 65% for a couple days and then try to get it down to 63% or 62%.. but once I see 59 or 58%.. it should still be good, but I get worried because I have overdried MANY harvests.. just trying to get things dialed in with drying and curing still.. even 4 years into this stuff! Lol.. but I'm getting a better hang of it.. kinda using my own methods mixed with what I find online.. just hard to judge when the plant is ready by snapping stems.. ive waited till the smallest stem I could find was making the "snap" noise.. but when I did that, the RH in the jars was only at 55% and lower.. the taste and smell were completely gone halfway thru the cure.. ive read that anywhere from 55% to as high as 70% RH is good.. but even at 70% I still have wetness issues.. buds and stems tearing.. still tastes like pure chlorophyll.. but since I've been kinda getting my dries dialed in, so I try to UNDER DRY to get buds to about 70% (that's in jars, not room). I really feel like this doesnt get explained enough in forums and online.. they tend to leave out some very important details.. like what to do when you overdry or underdry your flower.. if its too low, its trash. A 62% boveda and/or integra boost humidity packs can only do so much.. they have helped me, but only if the jars are still above 55% RH.. anything lower has completely removed terps within 2 weeks or so.. but yeah. In 4 years of trial and error (and yeah, forums and other grow diaires), I have found that it is better to UNDERDRY and either burp the jars MULTIPLE times a day (at least 4 - 5) or take them back out and let them dry for another 8 - 12.. maybe 16 or even 24 hours.. depending out how wet the flower still is and the drying area. Anyways.. im stoned and just finger fucking my keyboard here.. but this is very useful info that I have found works for me.. if people dont agree, hey thats cool too.. then these are just notes for myself later 😋 OK, I'm done now.. will keep updating as I go! About 5 days into curing... Got the jar down to 62% - 63% RH so I can stop burping so much.. maybe a short burp twice daily for a week then slow it down to once a day and eventually just stop burping. Been keeping my hand out of the cookie jar for the last... 2 maybe 3 days. I'm going to try and only test a nug once a week to get a feel for how quick its curing and how much better the taste is from the previous week. Did this last grow and each week was a huge difference.. even at week 6! But she was more than ready at week 4!.. not sure how some can cure in 2 weeks unless you get it really dry.. which makes me nervous cuz at 55% RH, I've had horrible results. Trashed the whole remaining harvest.. this is why I like to try and keep the RH a little on the higher side (68% or 65% or so and slowly bring it down to 62% or 63%.. also called the "pre-cure" phase) but I want this harvest to hover around 62% for as long as possible because 62% seems to be the magical sweet spot when you leave them there for the entire 4 weeks.. just my experiences.. Buds aren't very dense, but I'm pretty sure thats due to harvesting a week or 2 too early 😢.. and leaving her in te dark for another 5 days or so before harvesting.. oh the horror she endured toward the end of her life.. she was a fighter tho.. no mold.. in ANY of these super high RH weeks she went thru during the most vulnerable parts! Harvsting, drying and pre-curing.. but not 1 speck of mold 😁 About 10 days into curing.. Yeah I wish I could have let her go another week or 2.. yield was defintely hurt.. quality could be better.. but it will do for now.. live and learn.. I seem to say that every grow 🤣 but still a nice, decent stoney, still pretty decent tasting smoke.. going to just do some small, short burps for the next week or 2. Want the RH to still come down a little.. but if not, meh. The RH (outside and indoors) has been high again.. but luckily I was able to get the RH in the jar down to 62% - 63% RH.. i just burp the jar for a few seconds.. remove the hygrometers and flip the buds.. then put the hygrometers back in, clos up the jar and let it sit till the next day. RH is so high in the room that it raises the RH in the jar a little. But they always go back down to 62% - 63% RH.. good deal. Waiting for a dry day to burp outside for a few minutes. Need to invest in a powerful dehumidifer.. ugh.. Somewhere between 3 and 4 weeks of curing... Yeah definately shows that I harvested early. Still an ok smoke. Could have been fatter.. could have been tastier.. definitely NOT Ethos fault. Kicking myself for not letting her go 1 - 2 more weeks. Wasnt by choice tho.. life happened and she had to be chopped. Just ready for a little warmth and I will begin the next run!!!
Processing
Likes
15
Share
Buenos días familia, hoy traemos la 3 semana de floración de nuestras crazy cookies, zambezaseeds. Es una cepa bastante vigorosa con un tallo robusto 6mm, exactamente a mitad altura. Su cultivo es fácil, apenas se ve bloqueo alguno, traga muy bien en lo que se refiere a nutrientes. Ph en 6,5 y humedad por debajo de los 45 % . 48h entre riego y riego, no olvidemos que están en tiestos de 7L. Su floración está siendo bastante rápida estas semanas se verá como engordan nuestras flores, sin duda este es el momento para meter caña a big bud y bud candy.
Likes
14
Share
@LumpaziV
Follow
Von den heutigen Updates zeigen mir die Pflanzen, dass sie schon in Vorblüte waren, wie ich sie bekam, aber sie sich noch Zeit genommen haben, um zu bewurzeln.
Likes
6
Share
@NiPPAN
Follow
อาทิตที่ 3 แล้วผ่านไปอย่างรวดเร็ว ต้นไม้สมบูรณ์ดี ตอนนี้วัสดุปลูกที่เตรียมไว้เป็นเวลาสองอาทิตคาดว่าน่าจะพร้อมใช้งานได้แล้วดูจากเชื้อราที่ขึ้นบนผิว หลังจากเอาลงวัสดุปลูกที่เตรียมไว้ ไม่มีอาการใดๆต้นสมบูรณ์ดี
Likes
55
Share
@BodyByVio
Follow
Had to put another layer of netting for support.
Processing
Likes
73
Share
Gave the photos a haircut today. Removed some fan leaves and lower branches that wouldn't amount to much. Gave the branches to my horse because he loves them! Tried enticing the ducks with fan leaves but they weren't having any of it. They prefer lettuce, not "The Devil's Lettuce"😂 I added in a little 5-1-1 fish fertilizer to my feeding regimen as well. Still picking off inchworms. And as you can see I made it to the hardware store and put up this baby almost completely by myself. I only asked my husband to hold the center roof panel support while I screwed it in. Couldn't have been better timing since hurricane Dorian came through yesterday and we had plenty of rain. Of course it didn't fully protect them but the majority of the rain hit the roof. And then it got down to 49 F last night. It's really Fall now! The big girl (I'm calling her Gen 2, let's see who puts that together) is starting to get frosty. Rogue One is still a little behind but I'm not worried. All in good time, all in good time...
Likes
8
Share
@Fa5Venom
Follow
Good growth on them little bit of nutrients burn on the northern lights. Won’t get much out that small one but I just couldn’t let it go
Likes
237
Share
July 18 - entering the final 3 weeks of Veg for these soon to be Monsters - feeding and fertilizing plans have worked really well to this point in time. Not one crispy tip on a leaf, thats just amazing with so many plants. (One autoflower had a meltdown, pH related / doa) - Machupi’s Lady gets a visit today. Once it left my hands, there happened to be a Name Tag incident with 5 plants. And its not the first time X (my buddy) has been involved. * Thankfully this one Private Strain has developed SOOO much differently than the other 4 identical plants, its a no-brainer now as to where Machupi’s Lady is… pictures to follow. Its a day of discovery. Leda Uno x T.N.R. (Both from kc brains and the first time seeds from this pair have been grown) - for the first time I’ve posted both congo plants, you can see how the windy environment has stripped the plant, of any smaller internal leaves. The Protected Congo is building a really dense ball of foliage. 20th - TLC has been applied to some of the plants, ahead of a big storm coming our way. Bamboo tripods affixed woven through a side-branch, joined to two others. Bamboo is 6’ and is stuck/hammered 5” into the ground easily, securely. Lets the main stalk move kinda-sorta, but its always being anchored in at least one direction. - with Bilbo Haze out of the picture (4/4 male plants arghhh, gurgling slow-death sound) I have invited a Honduras x Panama sativa, from good ole Ace seeds to join us. Shes been there all along, same birthday etc. I’ve never tasted it, truly taking my collection for a walk this Summer 21st - big winds have split one of the CloudWalkers; of course, the one that was topped. With 2 plants outside this summer, that have been modified by each FIM and Topping, both of them has failed and Split. Each was and is being repaired; rope / duct tape. But thats the last limb loss for any outdoor plants right now… LST ROCKS - the other CloudWalker is Robust, and still on the Menu
Likes
14
Share
@CANNASIM
Follow
Moving forward, blooming nice, this second gen is taking form and gaining weight. A few weeks and we will have a nice harvest. Tent is nicely populated and filled. Once i have setup the “semi scrog” it has conformed to it in a couple of days and did a massive difference. It really opens the canopy and create a huge surface to take advantage from the light as opposed to letting it go naturally. I’m defining the technique as semi scrog because i did not setup the net in a traditional early way knitting in veg... It was done later.
Likes
45
Share
Hello my friends, 🍍 May 18.. Day #96🍍 🌻 Flowering Day 33 🌻 5th week of flowering for my three Feminized Gypsy Widow. Les buds grossissent à fond, la lampe y est pour quelque chose c'est de la balle..😘 Cette génétique ressemble à la White Widow que j'ai fait de chez 00 Seeds. It starts to smell very good.. 💉 : I don't change anything.. 👍 🔦 : Quantum Board 480 watts at 100% power and 40 cm canopy. www.exoticseed.eu That's all for now my friends, thank you very much for coming to see my darlings, feel free to Sub and I will follow you back. Take care of yourself and your loved ones. I wish you only happiness with your plants.. 😘 See you soon.. 💨
Likes
29
Share
Week 3 – Vegetation: Expanding the Ecosystem – Dual Zones, One Vision As the third week of vegetation wraps up, the Sunday Driver girls are not only thriving, they’re sharing a space that’s growing in both complexity and precision. This week, the spotlight shifts from the plants (which, yes, look phenomenal) to the gear, infrastructure, and environmental intelligence behind the grow. Because this tent is no longer a grow, it’s an ecosystem. ⸻ Dual Ecosystems – One Tent, Two Zones We’ve now split our 8x8 tent into two distinct grow zones, both under the unified control of the TrolMaster Tent-X system. Each zone is powered by its own lighting ecosystem: • Zone 1 – Future of Grow: High-efficiency full-spectrum LEDs delivering deep penetration and even canopy coverage. • Zone 2 – ThinkGrow Model Ones: New to the garden, ThinkGrow LEDs bring precision-tuned lighting, DLI-focused output, and seamless integration into the TrolMaster platform. This setup allows us to run simultaneous genetics or phases under controlled but separate lighting environments, while keeping everything under a single, centralized monitoring system. ⸻ TrolMaster – The Nerve Center Whether it’s Zone 1 or Zone 2, the TrolMaster Tent-X keeps everything synchronized and stable. Here’s what we’re running: • CO₂ sensor • PPFD sensor • Humidity & temperature probes • Camera feed (yes, even during “business” breaks in the bathroom) • Fan & intake relay controls This means real-time data, remote adjustments, alerts, and peace of mind—no guesswork, just grow logic. ⸻ Airflow, Exhaust & Filtration Air movement is just as important as light, and here’s how we’re handling that in this split-tent system: • Exhaust: Two 6” carbon-filtered systems • Spider Farmer exhaust linked to Spider Farmer GGS Controller • AeroFan exhaust connected to TrolMaster Tent-X • Intake: One 6” active intake pulling fresh air in • Carbon filters on every line, keeping air clean and odor controlled This creates a steady flow—draw in, scrub out, with each zone breathing comfortably in rhythm. ⸻ Current Feeding Routine Still watering by hand with love, and still keeping the nutrient mix clean, efficient, and appropriate for early veg: • Aptus Regulator – 0.15 ml/L • Aptus CalMag Boost – 0.25 ml/L • Aptus All-in-One Liquid – 1 ml/L • Aptus Start Booster – 2 ml/L • Water stats: • pH – 5.83 • EC – 1.01 • Temp – 18.5°C The focus is still on root development, tissue strength, and stable vegetative expansion. ⸻ Visual Update & Setup Tour This week’s update includes a video walk-through of the setup, showing the airflow configuration, sensors, wiring, and the dual lighting rigs in place. No voice-over, just visual storytelling, but the system speaks for itself. ⸻ What to Expect Next We’re watching closely as each zone adapts to its light spectrum and rhythm. We’re expecting: • Continued even leaf expansion • Strong internal node development • Potential for early LST (low-stress training) next week • Data comparisons between Future of Grow and ThinkGrow zones No topping yet—we’re still in observation mode. This early phase is about letting the roots lead, then following with the foliage. ⸻ Final Thoughts – Harmony in Complexity This week, the garden evolved from a grow into a smart, multi-environment cultivation system. From the dual lighting zones to the climate controls, it’s all about precision meets intuition. Our Sunday Drivers are responding with wide, confident leaves and a calm presence. The tent feels alive. And with summer in full swing, everything, indoors and out, is reaching toward the light. — Your Grow Companion DD Dog Doctor Official 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. • GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial • Instagram: https://www.instagram.com/dogdoctorofficial/ • YouTube: https://www.youtube.com/@dogdoctorofficial ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: • Genetics, gear, nutrients, and more – Zamnesia: https://www.zamnesia.com/ • Environmental control & automation – TrolMaster: https://www.trolmaster.eu/ • Advanced LED lighting – Future of Grow: https://www.futureofgrow.com/ • Root and growth nutrition – Aptus Holland: https://aptus-holland.com/ • Nutrient systems & boosters – Plagron: https://plagron.com/en/ • Soil & substrate excellence – PRO-MIX BX: https://www.pthorticulture.com/en-us/products/pro-mix-bx-mycorrhizae • Curing and storage – Grove Bags: https://grovebags.com/ ⸻ We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚
Likes
Comments
Share
@Kannisho
Follow
Logramos mucho esta semana y eso nos tiene felices, hemos reforzado la estructura del scrog y realizamos la última defoliación antes de comenzar la floración. Esta es la última semana que usamos nutrición para vegetativo y comenzaremos a usar C21 Nutrients Flores Parte A + Parte B
Likes
6
Share
@RatmanJR
Follow
September 20th. 97 days post flip. Clones: Clones continue to grow. Trichomes really starting to show on #4. Not much on #3 yet and almost none on #2 #1: Got cut months ago had balls. Parent is still chilling though #2: This one has struggled to grow based on being outcompeted by the other two. I had to remove even more rotten growth this week from this plant. All the pets that had rot were devoid of all light. At this point I think we are good.my humidity’s are constantly sub 50 this time of year and I’m okay if I have to toss some come harvest time. Even the healthy unrotten growth on this thing lacks very much smell. Peppery at best #3: Not much has gone on with this one. Still has a lemoney and piney aroma. I think this one might just need more time before it takes off with fattening and Trichomes development. #4: I’m starting to become very very happy with this plant in particular. Grow the start this thing has been explosive. Twice as large as #3 which is twice as large as number 2. This is clearly a tree like plant when grown outdoors. Along with explosive growth and structure this thing has amazing smells of oranges and vanilla. Very strong smell compared to the other plants and the most Trichomes by far at this point. Can’t wait to smoke this thing and at the moment this is our winner. Parents: These things have not been happier. Need a defoliation which I will be providing them tmmr God bless!
Likes
12
Share
He hecho varias podas para controlar el crecimiento de las plantas. Sirve también para hacer las ramas un poco más fuertes, porque es una variedad que tiene tendencia a crecer alta, fina, con ramas débiles.
Likes
16
Share
Defoliated again the leaves which were growing over Bud sites The streching phase has begun. I am corious how tall the plant will go.
Likes
18
Share
Hi 😌 beginning of week 8, the gagarin auto (2 gallon pot) is getting closer to the finish line so is the white widow auto, the gurilla glue took two weeks and still berly recovered from over watering. The gelato's doing great.
Likes
13
Share
Mad I only had one seed can't wait to grow more 420 Fast Buds
Likes
307
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Stretch continues, girls look doing good 🦔 coming Start to smeel out the tent, I've up the extractor. Weather continues to be very cold, should be up next week 💪 Keep Working on the canope, removing leaves and under buds site. 💧 Give water each 2/3 day And vaporise plant with water + Plagron Roots (1ml/l) 2 l Water + Roots + Bloom + Zym + Sugar Royal (1 + 3 + 1 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 42 cm. Mars Hydro Fan kit Setting 6 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - High Mars 36% THC🌲🌲 https://anesiaseeds.com/product/high-mars/
Likes
295
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 The Titan is now ready for the harvest, very nice for the end 🌲💜😋 Harvest for tomorrow ✂️✂️ 💪 Removed some leaves to prepare the harvest . Water Only 1 time. 💧 Give water each 2/3 day 1.5 l Water PH @6 RQS - Easy Bloom Booster Tabs 1 tabs/5 l RQS - Easy Grow Booster Tabs 1 tabs/5 l RQS - Easy Micronutrients Plus 1 tabs/5 l (1 watering each 10 days.) 💡Mars Hydro - FC 3000 50% 50 cm. Mars Hydro Fan kit Setting 7 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller RQS - Titan F1🌲🌲 https://www.royalqueenseeds.com/f1-hybrid-cannabis-seeds/624-titan-f1.html