Recommended
Likes
Comments
Share
Went to check her under the glass for the first time and she was ready before I was lol...hopefully she smokes as good as she smells
Likes
2
Share
I'm proud to announce ITS A GIRL!!!!! 10 week in vegg and finally she start to pop out buds. I'm so happy but now let pray she will flower in time before the cold hits
Likes
47
Share
Photos taken at Day 25: They start to recover and grow again. Sprayed them with Canna Cure to get more healthy leafs. Removed the humidifier. Lets hope they will grow for another week before they go into preflowering. Thats it for now, new pictures and updates will follow within this week. Stay tuned! Update: Day 28: Canna cure did his thing. The leafs start to get greener again. Also my feedings made them grow and recover again. Removed some lower branches and leafs They are back in the race!
Likes
Comments
Share
So it's basically day 66 on BK and day 58 on GG thinking about start to flush them... They look gorgeous and full of trichomes, smell still missing but I'm fine with it... Next update in week
Likes
7
Share
One more week I think, just flushed today and checked the run off the PH is at 6,4 and the PPM on 5 of the 6 plants was 330 the one with the burned tips had 665 not to my surprise, but that would explain the nutrient burn, the trichomes are cloudy and there are a lot of amber as well so want to flush this week and hope the fade starts so I can harvest with a fully flushed plant and a good ratio of cloudy to amber trichomes. I know now that I should not have given that last feeding a week ago and should of started the flush but live and learn, 1st time growing these, also the time lapse did not take a whole week not recorded I am super pissed, I will up load a real time video in a day or 2 under regular light, till then hope you all in the states get your Stimulus Check this week end, C ya
Likes
17
Share
runoff ec measured 2.0 this week. they went to bathroom and now they are around 1.5
Likes
25
Share
@Weedbadk
Follow
Cogollos muy duros y llenos de resina su olor es muy agradable , muy feliz con los resultados y recomiendo esta variedad 💯, Ahora a esperar 2 semanas de secado , y gracias a todos por comentar este seguimiento
Likes
18
Share
This is my first grow ever. I obtained a small grow tent and have sprouted seeds that are now in dirt. I have 3 now in dirt. It seems I have done much work in getting the proper equipment ect, its just there isn't that much solid information on watering your seedling at the very beginning stages after they grow tails and put in dirt. I have heard someone say that you should use a shot glass worth if around the center of the pot but directly in the center. Then ive heard people completely soaking the pot. I have 5 gallon fabric pots that i chose to use since they say to put autos in it's final home to start since they dont like to be transplanted which again, i have heard conflicting info about. I have 3 going but already kinda freaking out about if i didnt water them enough or too much. Anyway im learning and open to new info as it comes. UPDATE - I had 2 seeds pop up on 6/13 which was 3 days after planting the first seed and 2 days after planting 2nd. Humidity is high in the tent at around 76 which i believe is ok. I have a couple bowls of water in there for humidity and and small humidifier. I wasn't sure i was going to need the humidifier but got it anyway. I figure it may come into use at a later time as I am currently not running any exhaust fan as that seems to take the humidity and temp way down and im only using 1 light on the lowest setting. Im honestly just super excited to get a couple seeds to sprout out of dirt and would take that as a win. Im into this though and really hopeful for a good first run. Cheers.
Likes
371
Share
D29. We're at the start of the fifth week of veg, and today, I finally topped the first girl. I should have done it a while back, but I couldn't decide how to train the girls. Due to how tall the first girl had become, I topped quite a bit of her. I left four nodes, applied LST and some minor defoliation, so now I have eight tops in an almost flat canopy. I'll top the second girl later this week before putting in the scrog net. I noticed how the second girl at the end of the day had drooping taco leaves, indicating that she is getting too much light. I raised the light and will observe tomorrow how she react. This strain seems sensitive to how much light it gets during veg, and I'm curious how it will react once we're in flower. ------------------------------ D31. The first girl has bounced back from her topping and is looking great. I will top the second girl in a day or two, but since she has greater internodal spacing, I will keep only six branches to have both girls at a similar height. ------------------------------ D32. I brewed up a quick compost tea using oat flour as the food source. Some people claim that that will result in a fungally dominant tea, so I thought I'd try it out. I also added humic acid and a teaspoon of myco because why not? Honestly, I'm not sure it is even possible to create a fungally dominant AACT, as the constant water movement will most likely tear the fungal hyphae apart as they form. In any case, a different food source should promote other bacteria than the molasses I usually use. Diversity is the name of the game in living soil. Well, in life in general. I gave each girl 2 liters (5% of container volume) of tea @ pH 6.1. ------------------------------ D33. Today, I topped the second girl. At first, I tried to keep four nodes, but her internodal spacing was much larger than the first girl, so I had to cut her down to three nodes. Some LST followed the topping to start shaping that flat canopy. She looked pretty scraggly afterward but had perked up a few hours later. ------------------------------ D35. We're on the last day in the first week of flower. All is well in the tent, and the second girl has bounced back from her topping. I'll let them veg for another week or so and then flip them. I bought a mushroom grow kit to keep in the tent. I figured I'd test it out and see how it works. The mushrooms produce CO2 that the plants love, and hopefully, I'll get some tasty Oyster mushrooms to eat — two birds with one stone and all that. Yesterday, I gave the girls around 1 liter each of water @ pH6.0, with EM-1 added at 20ml/l, and today the girls got some fulvic foliar spray just before lights out. ------------------------------
Likes
15
Share
Sorry for the broken lens. My harvest was 19.5oz. I left the main stem and one of the branches to seed, I'll grow with the next generation of female plants, if successful. There was a week of rain and it was starting to seed, so I harvested it a week early. In the end though the terpene profile was crazy for edibles and for smoking. The slow drying allowed the buds to retain a lot more terpenes, the fan leaves shield the buds and prevent them from drying out too quickly.
Likes
11
Share
La planta se empezó a estirar y a mostrar sus primeros pistilos y ya empieza a marcar esas puntas que irán florando
Likes
8
Share
@Oldwied
Follow
Day 23 The third week of flowering is complete. Most of the height growth is finished. Time for a radical defoliation. The girls look great. Unfortunately, Kush has formed hermaphrodites on the flowers in the shade. I hope that I have removed them all. The lamp will be raised to 100% output in two stages.
Likes
43
Share
The purple punch cookies is looking happy. Will be switching them to flower in a week or less. I gave them a flush and fresh nutrients. The humic acid really makes a huge difference in the uptake of nutrients. I am at about half dose on nutrients compared to what I would have to feed without it. Winter is approaching and bringing the low humidity with it. All of the humidifiers I have tried either dont work or I have to constantly refill the tank. So I decided to use my redneck engineering skills to throw this humidifier together. It holds 4 gallons of water and she pumps like a freight train. I have dubbed her the Steam Queen. I got 2 cool mist foggers that put out about 400ml per hour each and used some things I had around to make them a little float. Added an old computer fan to force the mist out through a 2 inch pipe. She won't win any beauty contests but she pumps out plenty of cool moist air. I also upgraded my exhaust to a variable speed for more added environmental control. Just going to do a little more training over the next week then try to make some buds.
Likes
3
Share
@Bluemels
Follow
Tag 22: getoppt bei 4 Nodien. Tag 24: Umgetopft in einen 15L Topf. Tag 25: Ich fange an die Zweige runterzubiegen.
Likes
8
Share
18 weeks from seed to harvest. Love 34 street seeds, quality genetics for a fair price. These garlic cookies showed no disease or pest issues, no mold or powdery mildew. Easy enough to grow, no surprises, no super stretch in flower, but I would recommend training or SCROG to control them. Pungent Pine is what I am callling this smell, over 800 grams wet weight. They are hanging to dry in my tent as I write this, 60 %RH and about 71 degrees of freedom units! Can’t wait to try it out 🇨🇦❤️🌱😎💨
Likes
144
Share
@DevilsBud
Follow
New week for the 7 strain 11 plants grow Everything is going great some little things here and there but nothing to be worrying about so i am happy how it goes one plant had balls and couple have some droopy leaves on them but have feeling my temp is way to low in darkness 16/3/22 I always show the good the bad and the ugly made couple mistakes wiles training but luckily these plants are so strong give some support and the branch that broke will fixes here self 💪🏻 Will be updating Tru the week And remember just grow weed and stop growing bullyish behavior visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter