Likes
Comments
Share
@Messypies
Follow
And we are done! Both plants have now been chopped after 48hours darkness. Now currently drying. I will post some close up harvest shots once bud is dry :)
Likes
5
Share
@Ensign420
Follow
Greetings fellow growers 🖖 and welcome to my first grow ever. This adventure actually started several months ago when I decided to stop buying flower from dispensaries and just grow my own bud. How hard can it be!? This is actually my second seed of this strain. The first bean sadly died due to over watering (sorry girl, RIP). I was literally watering the cube to the point where water was dripping from the bottom, then heavily sprayed the humidity dome and tray with the vents completely closed. Everyday. Multiple times. I never let the dome or try dry out. So after about 8 days of not sprouting, there was a funky smell of rot. So that was that. Later I learned that rockwool retains a lot of water and can easily drown seeds. So a wet/dry cycle is best for rockwool germination. So even after hours of researching and digging through forums and tutorial videos, I was still under prepared for this journey. Did not consider how delicate the germination phase is. Oh well. Lesson learned. Reset and try again! I hope everyone is safe and stoned during this corona crisis. Just like everyone else in the world, I want this pandemic to be over with. But in the meantime, let's grow some weed! 🖖 [START OF WEEK 01] Day 01 - Monday - 08/03/20 - Total Days: 001 ----------------------------------- - [0830]: Light Schedule: 24Hrs/0 --- Soaked cube in 5.5 PH water for 10 min. Did not shake water out. --- NO NUTES! Only PH'd down to control the PH levels. --- Did not use the default hole (way too deep). --- Flipped cube upside down and made a shallow hole for the seed (less than 0.25" deep). --- Placed seed in and pinched hole close. No additional water added. --- Sprayed the tray and dome with straight water (5.5 PH). --- Vents are cracked opened a for ventilation (about 1/4 opened each). --- Distance between the light and tray was 53" --- AC was set to 80 °F --- Exhaust fan was set to 86 °F --- Room average temp was at 85 °F --- Dome humidity was at 85-99% when sprayed. --- Allowing to completely dry before respraying. - [2200]: Dome and tray were completely dry! Sprayed only tray and dome with more water. Day 02 - Tuesday - 08/04/20 - Total Days: 002 ----------------------------------- - [0845]: Sprayed dome and tray in the morning. Everything was dry. --- Hoping for the best! - [2130]: Everything was dry again, so sprayed dome and tray at night along with a light spray on the cube. Day 03 - Wednesday - 08/05/20 - Total Days: 003 ----------------------------------- - [0830]: Everything was dry again. Resprayed dome and tray. Slightly sprayed cube. - [2125]: Hooo damn!! She popped! Am little stub is visible! Resprayed dome and tray again. --- Still going 24/0 for lights. - [+0033]: Just checked up on her and I swear she grew a bit taller! Getting excited! Day 04 - Thursday - 08/06/20 - Total Days: 004 ----------------------------------- - [0845]: Wow! Went from a little stub to fully sprouted overnight! Everything was pretty dry again so resprayed dome and tray. - [2200]: Tap root is visible! Over 1" long too! Just resprayed dome and tray again. -- Going to prep for hydroton transplant tomorrow! Day 05 - Friday - 08/07/20 - Total Days: 005 ----------------------------------- - [0930]: She keeps growing! -- Added a bit of CalMag to the spray bottle (8 drops to 650ml of distilled water). Resprayed dome and tray. Water was at a 5.4 PH with 141 PPM. - [1045]: Prepped the bubble bucket with 4.5gal of water. Water is high enough to reach about 0.25" above the bottom of the net pot. --- Added 3 drops of Superthrive --- Added 3.5ml of CaliMagic --- Added 2ml Hydroguard --- Then PH'd down to 5.6 --- Solution Strengh: 120 PPM --- Water chiller is set to 20 °C - [1100]: Transplant time! --- Filled the net basket 1/3 with hydroton. When placed in the bucket, air bubbles are not visible, but are slightly below the surface (slight digging will reveal the water/bubbles below). --- Removed plastic on rockwool cube and placed in basket, then filled around and covered with hydroton. Making sure to block any light from passing through the net pot and into the nutrient solution. --- Covered with a half-bottle dome sprayed with the CalMag water from earlier. --- Hoping for the best! - [1300]: Raised Bucket 5" higher. Now light distance is 48" to top of bucket. - [1820]: Lowered tent exhaust temp to 76 °F --- Lowered AC to 75 °F --- Raised bucket even higher so light distance is 30" to top of bucket. - [2300]: Looking good! --- Sprayed dome and surrounding hydroton with more CalMag water. --- Attached timer to light! So new 18 Hrs On/6 Hrs Off light schedule. --- Lights On: [1600] (4pm) --- Lights Off: [+1000] (10am the next day) --- Decided to go with lights on during the evening/night and off during the later mornings/afternoon (the hottest part of the day) to see if temps can be controlled better. --- Please survive girl! Day 06 - Saturday - 08/08/20 - Total Days: 006 ----------------------------------- - [0800]: Everything was dry. Resprayed hydroton and dome. - [2000]: Here first night cycle seemed to go well! Get'n taller! --- Dry again. Removed the dome. --- PH went up to 6.5 so PH'd down to 5.7 --- Ran the top feed drip ring for a bout a minute to wet the hydroton and rockwool with the nutient solution. ---Too scared to leave the top feed on 24hrs (I don't want over water her and cause dampening-off). Will let dry before re-watering. - [2100]: After closer inspection, I think she's looking a bit yellow. --- Decided to add a bit of grow nutes to the bubbler solution. --- Added 2ml of Sensi Grow A --- Added 2ml of Sensi Grow B --- Solution strength after adding more nutes: 176 PPM --- PH went up to 6 --- I hope that the extra chelating properties of the 'PH Perfect' solution is enough of a buffer for proper nutrient uptake. Day 07 - Sunday - 08/09/20 - Total Days: 007 ----------------------------------- - [0800]: Water dropped a bit (mostly due to evaporation) so solution strength was at 190. --- Checked PH again. Was still at 6, so PH'd down to 5.4 --- Ran the top feed for a minute to wet the hydroton a bit. - [0915]: Since she's looking perky but still a bit yellow. So decided to up the nutrient concentration even more before lights out. --- Added 2ml more of Sensi Grow A --- Added 2ml more of Sensi Grow B --- Solution strength after adding more nutes: 199 PPM --- PH went up to 5.8 - [1700]: Checked nutrients. --- PH: 5.9 --- Solution strength: 202 PPM --- Added 4ml of Voodoo Juice --- Added 4ml of B-52 --- PH after adding more nutes: 5.9 --- Solution strength after adding more nutes: 238 PPM - [2130]: Decided to make a new foliar spray to address the continued yellowing. --- Started with 500ml of distilled water. --- Added 3 drops of CaliMagic --- Added 3 drops of Sensi Grow A --- Added 3 drops of Sensi Grow B --- Added 3 drops of B-52 --- Added 1 drop of Superthrive --- Solution strength: 164 PPM --- PH was at 5.9 and did not adjust. --- Gave her one spray. --- Also sprayed the surrounding hydroton. [END OF WEEK 01]
Likes
2
Share
Got back from 2 weeks holiday and immediately lollipopped and defoliated all 4 plants heavly. Will wait a few days for them to recover from the battering I gave them before flipping to 12/12. This plant is at the back of the 4 in the timelapse.
Likes
11
Share
Likes
7
Share
The plants are growing nicely! They were all flushed with plain pH balanced water on Friday and will be fed nutrients listed above on: 5/31
Likes
59
Share
@AsNoriu
Follow
Day 59. She starts to stink or smell ;))))) I have flue, getting a bit better and still could smell her today, means she stinks ;))) That's good, bad that it's air, except top bud - rest is worthless ;))) I am starting to doubt that I'll beat 1g/W , need to do around 15 ;))) All looks closer to 5 .... She has time till 24th , then I go for holiday and I chop her ... 150ml 6.3 water in ! Happy Growing !!!
Likes
245
Share
@Roberts
Follow
I did a top dressing with the dynomyco last week and washed it into my coco upon watering. Not sure if the extra fungus helps or not, but can't hurt. Thc bomb is getting rather large for a 100 watt spider farmer SF-1000 light. I am running the board at 11 to 12 inches from tops of plant. Which is safest I can get the light in my growing conditions. I have been steadily keeping upped Amounts of phosphorus and potassium. While trying to reduce nitrogen levels. I been keeping underside clear. Waiting for the flowers to start stacking up. Looks like this will be a longer grow. Thanks again spider farmer, and bomb seeds🌱👍 Thanks again to everyone in the grow diaries community. I really appreciate everyone that shows their support through likes, and follows. Also like to invite everyone to my YouTube channel for more cannabis related videos. Extra thanks to my subscribers there😀😀😀
Processing
Likes
26
Share
@MG2009
Follow
02/01/2021 Going to sprout my last 2 Bluedreamatic seeds from (fast buds). Will be sprouting in mini greenhouse on heat mat. Once seedlings are ready they will be moved under 1000w MH for veg and flowering. 10+hours later they are on bottom of water and time for paper towels in baggie. 02/03/2021 1 seed sprouted and I dropped the other in soil 🙏 I hope because it disappeared! So got at least one Bluedreamatic on the way hoping to see other one sprout in mixing tray. 02/05/2021 She's above ground! Day #1 , currently under 150w compact flourecent 3 way bulb when first true leaves form (Not single finger let)I will start veg cycle under 1000w MH see you in 3-4 days for weekly update. topped seedling pot with vermiculite 1/2-3/4 inches leaving the cotdtyledons 1/2-3/4 inches above surface. Roots should fill up this container quickly, moved under1000w MH light for vegging. Seedling is 3-4 ft away from light but also off to the side no serious heat just about room temperature. I could not feel heat from light where I put seedling, comfortable on your skin is good for plants. 02/11/2021 It's day #6 above the soil, she is doing well already grown 2" above where I topped with vermiculite. At lights out I put her in humidity dome with my tomato seedlings main area of grow gets very cool at night,so I try to keep her at a better temp 72°f.
Processing
Likes
14
Share
First days of flowering this week, I promised myself to be hands off this week... Journal reads: 1/13: Fed these Girls! 3 TSP/GA Big Bloom 2TSP/Ga Grow big and Tiger Bloom 1/2 tsp Clean Kelp. Plant 1 looking stressed. Hands off! 1/15: Removed Netting, added fan, restarted time lapse it had failed last week ~ 10 days 1/17: I trimmed dead and suckers from all plants, fed with 3 TSP/GA Big Bloom 2TSP/Ga Grow big and Tiger Bloom 1/2 tsp Clean Kelp. Trimmed a lot!
Likes
4
Share
So maybe a little early but i had multi reasons.. shes dank! smell is amazeballs! and quality is up there doing an auto cure (bucket + timer air pump) the smell is very creamy.. cant wait to press some!
Likes
88
Share
Giorno 55.Le due Kmintz da oggi prenderanno solo acqua ph 6.2. Hanno entrambe il 10% di tricomi ambrati e entro 7/14gg max verranno tolte. Ho proprio voglia di fumarle!!! Le due Watermelon sono più lente. Sicuro altri 20/25gg minimo. Alla prossima settimana e grazie del passaggio 😊
Processing
Likes
88
Share
@No_Clout
Follow
22/08/18 - everything’s looking great I’m sure they will be finished stretching sometime this week and also should be getting an additional LED to add to the tent by the end of the week. Also started to lolly pop each plant took about a 1/4 of the leaves etc so far will see how it reacts to this to see if I can continue to 1/3. 24/08/18 - lookin good 48hr after I trimmed the bottom branches/big ass fan leaves in the shade looking miserable so i had to chop em. Still waiting on my extra led in the post.
Likes
2
Share
@Velk1
Follow
Plant grew out doing its thing , med feeder can handle rough conditions and heat ! Great for beginners
Likes
2
Share
@mkannon10
Follow
The white residue is from Epsom salt foliar spray... Hydroponic buds (Banana Daddy) are getting noticeably denser than soil (Pluto Runtz)
Likes
27
Share
I'm happy with the progress they have made, all have responded well to defoliation and LST. I'll be adding a few more light nutrients at some point this week. The gorilla zkittles is shorter than the rest but looks very sturdy and has plenty of bud showing already, I think this is because it started flowering maybe 7days before the rest and in them 7days the rest shot up rapidly! I'll update daily and try get some nice videos with lights out.
Likes
62
Share
@WhiteEdge
Follow
Flowering W4 D1 Light intensity - 800-950 MAX PPFD , Light distance - 50/55cm, DLI - 40, Light Interval 12/12, SCL - 45% Midea 28c1% day/night, TM 68/58%RH, AC Infinity AUTO - 4/3 Day RH - 67/70%, Night RH - 57/60%, Day Temperature - 26.5/28c, Night Temperature - 22c/23c Leaf temperature 24/25, VPD Day - 1.0/1.1 , VPD Night 1.0/1.1 CO2 - 400+PPM Nutrient Tank - 2.80EC, PH-5.88 Temperature - 19/20c, ORP-500/600mV Day Misting - 30sON/20minOFF + 1 x 4min shot Night Misting - 45sON/45min OFF Runoff - 10.00h r3110/6.12PH, 19.00 r2900, Flowering W4 D2 Canopy @ 115cm , highest top is around 120cm, mauby less than 3cm from last two days, stretch slowing down! Start Bulking this girls, new irrigation program - cascading solenoid valves @ 10 minute Keeping nutrient strength and composition untouched for this week Light intensity - 800-980 MAX PPFD , Light distance - 50/55cm, DLI - 40, Light Interval 12/12, SCL - 50% Midea 28c1% day/night, TM 68/58%RH, AC Infinity AUTO - 4/3 Day RH - 67/70%, Night RH - 57/60%, Day Temperature - 26.5/28c, Night Temperature - 22c/23c Leaf temperature 24/25, VPD Day - 1.0/1.1 , VPD Night 1.0/1.1 CO2 - 400+PPM Nutrient Tank - 2.80EC, PH-5.88 Temperature - 19/20c, ORP-500/600mV Day Misting - 30sON/20minOFF-cascading's selenoid valves + 3 x (3+4+6min) shot Night Misting - 30sON/45min OFF Runoff 10.00 r3210ec, 14.00h-3030ec/6.20ph, 19.00h-r2840EC,
Likes
21
Share
Last week it rained and it looks like it is going to rain again this week. Frostbanger didn't get any nutrients last week which is okay because it is time to flush. I am flushing earlier than I had planned but it is time to take Frostbanger down!!! It has also been very humid here, around 90% and I am worried about bud rot. Frostbanger is definitely dense and resin covered, just like its description. It also has a very strong smell. I am sure the neighbors can smell it-LOL. This strain has been a pretty easy strain to grow. The weather conditions have been my biggest challenge.
Likes
6
Share
@Patras19
Follow
Čusan tak proběhl sekec mazec. Mam rad spíše energii model tak jsem to sklidil bych řekl tak akorad. Na nějaký kouř tam bude za me spokojenost. Je cítit taková sladká zem, hodně intenzivní. Těším se mega na ochtnávku
Likes
10
Share
Ph issues here too. Hope it's not too late to correct it!
Likes
6
Share
@weedoco
Follow
LIGHT UPGRADED !! 240W SAMSUNG LM301H QUANTUMBOARD KINGBRITE