Watering when dry only & doing my experimental grooming still . From the looks of it it’s working exceptionally well. Not much to report other than it’s time to do more LST. Only 1 of the 3 have thrown preflower pistals beginning 1 week ago . Another week on the GreeneScene in the books 📚

Week 1 Report: The White OG - Solo Survivor’s Journey Survivor Status: One Seedling Standing Strong 🌱 Our girl The White OG is standing tall and doing her thing! While some seeds may take their time or not make the cut, this resilient little seedling is already setting the tone. With close to 100% relative humidity (RH) under the dome, she’s got the ideal environment to kickstart her roots and early growth. Environment: Humidity Dome Life • RH: Close to 100%, creating that tropical atmosphere where seedlings thrive. Humidity at this level helps keep her cells hydrated, and with a dome, moisture is consistently recirculated. This prevents her from drying out and promotes steady root and leaf development. • Lighting: For now, we’re keeping the intensity low. At this young stage, seedlings benefit from indirect, gentle light, just enough to encourage photosynthesis without causing stress. Future of Grow LED on a dim setting (200 PPFD) does the job, providing the perfect balance for early growth. Water & Nutrition: Keeping It Simple No heavy nutrients this week; she’s working off the stored energy in her seed. The aim is to keep the soil or Root Riot cube slightly moist but not soaked. Overwatering can drown young roots, so light misting is all she needs to stay comfortable and growing strong. Growth Observations: Slow but Steady Wins the Race Our solo survivor might be growing at her own pace, but that’s exactly what we want! At this early stage, less is more, and slow growth often indicates a strong foundation. We’re looking for stable, healthy roots and tight early nodes as she finds her rhythm. Grower’s Tips for Week 1 1. Humidity Control: Keep RH high but watch for condensation build-up. Too much moisture can invite mold, so allow some airflow if needed. 2. Stay Light on Water: Just enough misting to keep the medium damp. 3. Patience Is Key: Each plant has its own pace; giving her time to establish now sets her up for a strong journey. Next Steps As we move into Week 2, I’ll be keeping an eye out for early leaves (cotyledons) opening up, as well as steady, even growth. Soon we’ll gradually adjust light intensity and start thinking about nutrients. Shoutouts to the Community! Big thanks to Seedsman for the genetics , to Future of Grow for top-notch lighting, Aptus Holland for the reliable nutrients, Trolmaster for total control and everyone in the growers’ community cheering on this solo survivor. 🌱💪 Growers Love! 🌞 and here’s to a strong start for the future of this grow! 🌱 DISCOUNT CODE - SeedsmanSeeds - DOGDOCTOR 10% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚

 Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All and remember to keep that smile big and alive 💚

Looking good;)))

The purple kush has been behind all the plants the whole time. When you look at the plant you will notice a lot of the leaves are burnt. 10 days ago or so I think I accidentally gave them to much nutrients or I didn’t shake the bottle I used. The purple kush is starting to bulk up some I’m thinking it will be a decent little plant when all is done.

Defoliation day 38-43✂️

D08/V04 - 08/04/23 - Nothing D09/V05 - 09/04/23 - Nothing D10/V06 - 10/04/23 - Nutes added EC 0,6 D11/V07 - 11/04/23 - She's ok D12/V08 - 12/04/23 - New water and some nutes EC 0.6 D13/V09 - 13/04/23 - Nothing D14/V10 - 14/04/23 - Nothing

She’s cruising along! Had some very hot days this week and no rain, but then got hit with a downpour. Going to have to up the feedings soon to accommodate the washout. Doing great otherwise! Topping again soon too

Adding in additional nutrient called Overdrive for weeks 2-4

2nd week just water again no nutrients or supplements. I moved her from the back to the front of my tent so she’s getting more light.. send to have not made a difference so I’m going to move her back and let the younger week 5 & 8 plants get priority. Any advice appreciated but I think “just wait and be patient” applies.

She is going to be flipped to 12/12 next week she is so ready for 12/12 🙏💪💚💜💚💪🤣💪💚💜

i filled the wing up with a boost buddy co2 bag and my plants got a new light and there growing like weeds loving the total package

Day 62: time to flush! Flushed her with canna flush once so now for 5-7 days I will just give her plain water with ph- She looks so nice! But way to much nitrogen in her This is the light that I’m using for this grow! Mars hydro SP3000 High PPFD at 2.8 umol/j, average yield at 2.5g/w, increasing your yield 50% or more compared with old blurple and HPS lights, 300 watts output. Dimmer knob added, more convenient to adjust the brightness. Up to 30 lights can be daisy-chained and control together on just one light, or just have one lamp in 120x60 tent is perfect for light. https://www.instagram.com/marshydro_aliexpress2/

Flowering Day 2: Hope the video shows them well enough. These girls are amazing growers. #1 has gone big with the stretch. i expect her to be the best yield. #2 and 4 are more squat in structure so lean on the indica side i think. #3 is similar in height to 1 but is nowhere near as big. Now the stretch is done i can plan the day 7 defol and strip out of all the small whispy rubbish that will just steal nutes and energy away from the worthy ones. i plan to keep some lower fans without their buds to give extra photosynthesis to assist the others.

Week 1 - Day 1 20L Super Air Pots with a bottom layer of clay pebbles, (an inch deep at the centre point) and topped off with Growdog’s 70/30 coco perlite mix. The tops of the pots are covered by green plastic water distributers to evenly spread the water from the 12” watering rings. 2 lights; each 300W actual draw, currently inside the tent. 2 more coming next week to make a total of 4, across the 6 plants achieving a true watt draw of 1200W. Aiming for 1g/watt Germinated seeds from FAST BUDS, were planted and hand watered using tap water pH’d to high 5.8 to low 5.9 with H&G Roots Excl. giving a nice PPM of 362 to start. The BudBox tent is a 2x2x2m, using a Medusa Boosted XL run off trays to a waste brain were the run off can be tested. This will then be recirculated into the feeding tank again. The feed tank will a standard 100L water butt, retro fitting pumps inside for Feeding and Pump to waste - for cleaning the tank out each week. Another 100L water butt will contain a store of filtered RO water which will fill the feeding tank. A 10L PureMate humidifier is set at 65%, along with 2x RAM 16” oscillating wall fans which are mounted to the top of the tent for maximum coverage - set to lvl1 on swing giving the 25°C. No extraction yet. This is ready and waiting. 8” HyperFresh fan with a RHINO 8”x600 pro filter. We are using 8” acoustic ducting.✌️🏻 Week 1 - Day 2 No change. Keeping the new environment stable is difficult. The humidifier is not large enough for the space. Week 1 - Day 3 Fed PH RO water this morning. Trying to keep the humidity up inside the tent. They have popped up! It begins :D Did a feed of 5.8PH RO with CocaA&B 0.4ml/l, Roots excl 0.3ml/l, Calmag 0.2ml/l for a 150PPM. 300ml was used to moisten the coco per pot. Extraction fully connected. Environment stable at 23-24°C, trying to stay at 23.3°C. Humidity fluctuating 47-60%, humidifier struggling, but hopefully be okay. Week 1 - Day 4 All 6 are up and reaching. Husks hopefully will pop off soon. Will be doing another small feed this evening to keep the coco moist. Little leaves have appeared!! Fed another 300ml, 5.8PH @ 151PPM/ plant. Week 1 - Day 5 All shooting up now, tallest at 5cm down to 3.5cm 🌱 I gently helped the last 2 husks off the smallest ones to hopefully even them up. Gave the coco 1L of RO water around the edges. Week 1 - Day 6 Nothing to report this morning. Another PPM feed to be done shortly. Soaked the coco until run off with around 3-4L per pot using 5.8PH nuit water; 0.4 Canna A&B, 0.2 Calmag, 0.3 Roots Excl. 152PPM. First time we tested the Medusa brain - works well and pumps away to the feed tank, need to change one of the low trays to be a boosted tray for better drainage. Giving 5 boosted trays and one normal. Hand feeding up until this point, but will connect up the automation in the next week. Week 1 - Day 7 Strongest are growing around 1cm a day now. Tallest 6cm, smallest at 4cm. Looking forward to next weeks progress :) Bought a wet&dry vac - best thing ever!! Haha. Cleans everything in sight plus all the water from the dirty run off. Lifted all the pots, still a good weight to them so no feed or RO water today I think. Bring on week 2! 💪🏻

Beginning of week 8 and seems like a long way to go. Most of the hairs still white. Hopefully the buds will fill in more! As right now I’m planning to take it 10+ weeks. This week I will lower the CO2 slowly 50 PPM every day until I will reach 800PPM. Also I will lower the light intensity by 2% every day. This week I lowered the day temp to 79 degrees and next week I’m playing to lower it every further to 76 degrees Fahrenheit. Water temp is at 68 degrees and probably from week 9 I will lower it to 66. Beginning of week 8 TDS is at 550PPM. I sent adding the Late bloom enhancer from Current Culture! End of week 8 : lowered the TDS to 470ppm , she seems that it not eating so much nutrients anymore. She still drinking 3 gallons of water every single day.

Doing some LST

12/5 did some LST yesterday the first time I tried it she’s responding well I’m going to continue nutrients at half strength and that’s all for now 12/6 there are more bud sights on this than I’ve ever seen on any auto flower. I’m already seeing a lot of crystals in the leaves she’s responding well to the LST and I gave her a 1 mL per liter feeding of nutrients with 2 L of water I’m trying to be very careful. I have been using SF1000D lights I bought them a few years ago,they’re not bad they do get hot, especially when I’ve tried to put two of them in one tent it is very difficult to keep cool. Viparspectra I’ll keep it running at 80% and that should be good enough for one autoflower, I got the XS1500. I want to see if there’s any difference in the newer LEDs compared to my older Spider Farmer lights . I found a discount code in one of the discussions here in the site somewhere, and it actually worked it came to about 145 total. It’ll be here tomorrow. 12/7 💎💎💎 I love this seed company. This plant that I topped between three and four and did LST two days ago on is showing me bud sites that are fuller and more full of crystals that I’ve ever seen. this is my 10th Autoflower, my first one from this company and it’s completely different, way better, it’s just phenomenal. I like a clean and symmetrical and even grow. Doing this will make it much easier to process. I’ve never seen a plant grow like this. This is my first time trying LST and I’m glad I did it. It completely changes the plants you can definitely see there will be much more. 12/7 she looks great. because I spread the branches out the way I did, and only have one light on the leaf surface temperatures and the bud surface temperatures are all between 72 and 74° which is perfect. 12/8 Resin production is incredible. it looks like millions of tiny angels jizzed all over my plant it’s the most beautiful thing I’ve ever seen 12/8 I got the new Viparspectra light today. It has about 100 more LEDs in the SF 1000 D I’ll take some magnified pictures of the LEDs. The new one is much heavier I like the dimmer that way I don’t have to put in secondary lights for seedlings. It’s not a bad light I like being able to dim the light I ran it at 100% and the temperature was a little hot for me and I’m keeping it kind of close to the plant so I’ll probably lower it down to 75% and that should be good I think. Also I noticed that this one Viparspectra light looks to me brighter than 2 sf100d lights. 12/9 I turned the Viper spectra light down to a little bit less than 75% to bring it down to 100 W. When I did that the temperature stays around 95° on the board and about 98° on the driver, so it is far cooler and more efficient at the same wattage than the older spider farmer lights which were at 110 to 118°( about the same as the XS1500 at full power). So a single 150w xs1500 is about the same as 2 SF1000D lights as far as heat I'm sure the PPF or whatthehelleverthatis is higher ,very nice, If the SF1000D's would have had dimmers they would have been perfect. 12/10 awesome 🤩 12/11 I am seeing lots of resin production more than I’ve ever seen. I think this is so far been my best most successful grow this plant is great. I’m glad I found the seed company. The other ones I used before were pretty bad, I don't LOVE them at all. Also my Yamaha A4A 1600 receiver is total junk, I mean total... I'll never have the money to spend on something like that again, I was totally ripped off. Unrelated but so many formerly trustworthy companies are just TOTAL garbage

Flowering day 65 since time change to 12/12 Hey guys :-) . It is nearly time . Harvest next week :-) . Watering would be done twice this week with 1 l each (nutrients see table above) Otherwise it was checked and everything was cleaned. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany