08/11 - comenzo su octava semana de floración. Le agregue el limpiador de raices para ayudar a limpiar mas rapido. Su olor es muy fuerte y dulce. Las hojas ya están amarillas. La semana que viene ya la podo. Estuvo casi dos semanas en lavado de raiz. Los cocos estan llenos de tricomas. En estos dias estare subiendo mas imagenes de como viene. Podes seguirme en instagram como @bruweed_arg

indoor plant looks healthy average height for a 2 week old plant no nutrients just bat poo tea and water let's see what's up .....

Plants respond really good to defoliation, the plants grow a lot in 48 hours after defoliation. In the first day of this week I changed de lights, but the flowers start showing up 1 week after the change.

I must say at this point I will definitely grow another photo period again , it startet very slow but it has some nice big buds now 👍

day 9 for a few days I have seen Dr. Thunder have N issues. I put about 4-5 cups of old discarded coffee grounds that has been saved for 5-6 months, into my 5 gal water bucket,along with air stones etc. My water ph has been significantly low (6ph)from around day 7 to 11(writing this day 12). day 12 video, water is back to 7. Been giving Dr. Thunder Bloodmeal now into watering. I personally would like a darker green. All females showing 4/4.

Plenty growth shown on most plants, unfortunately we lost 3 to slugs ate every node on the plants so they been pulled. Will put some autos in replace of them. Topped a few this week to try get them bushed out. Had a good feed of grow, hopefully this slug pellets will keep them at bay and they will be stress free. That’s all this week! Happy growing🌱

Another couple weeks down, day 14 of flower, day 113 total, no smell, no tricomes, but stacking up nicely, tons of hairs and should be some gorgeous big ol colas! 32 colas!!! Lots of nutrients, started sugars and high pk.

Hello, I hope you're all doing well. I'll consider this week a complete failure. When I repotted my plants, I added mulch, but it was only 3 cm thick. As a result, my plants were miserable for four days because it was too thick. The soil was cold and remained very damp due to watering during repotting. It smothered the fallen leaves, some of which even turned yellow. It seemed like a magnesium and calcium deficiency and an unbalanced pH. I re-evaluated my approach and, most importantly, added a light layer of mulch. They've recovered well. It just goes to show that a small mistake can teach you something new every day. This week, I added: 2 g of Epsom salt: This powerful mineral is pure magnesium sulfate, one of the main components of chlorophyll produced by plants. It's a chelating agent: it allows the solubility of other substances (such as molasses, humic and fulvic acids, neem oil, and spirulina) and acts as a heavy metal sequestrant. 5 g of Micronized Wild Horsetail Spray: silica, defense 5 g Fish Hydrolysate: amino acids, proteins ppm 600 pH 6.5 Wishing you all a successful cannabis grow! **************************************************** Bonjour, J'espère que vous allez tous bien. Cette semaine, je la compterai comme nul. En fait lors de mon rempotage, j'avais fait un paillis, mais il était de 3 cm. Du coup mes pieds, on fait la gueule pendants 4 jours, car il était trop épais. La terre était froide, rester très humide dut à un arrosage lors du rempotage. Elle étouffait les feuilles tombées, elles ont même jauni pour certaines. Comme un manque de magnésium calcium et un PH non ajusté. Remise en cause et surtout un paillage léger. Elles sont bien reparties. Mais comme quoi une petite erreur et on apprend tous les jours. Dans ma terre cette semaine, j'ai rajouté. 2 g de Sel d Epsom: Ce puissant minéral est du pur sulfate de magnésium, l'un des principaux composants de la chlorophylle produite par le règne végétal. C'est un chélateur : il permet la solubilité d'autres matières (comme la mélasse, les acides humiques et fulvique, l'huile de neem, la spiruline) et agit comme un séquestrant de métaux lourds. 5 g de PRÈLE SAUVAGE Micronisée Aspersion : silice, défense 5 g HYDROLYSAT DE POISSON : acides aminés, protéines ppm 600 PH 6,5 Je vous souhaite à tous une bonne cannabiculture 👍👍👊😁😁😁

Topped the other 2 branches and kept her pinned down, getting somebody nice growth going now, steady away nothing flash but it's all good. Not far off flipping her, probably a couple weeks.

😋😋😋

ALL THESE PHOTOPERIODS WILL GO IN THE 8X8 TENT ONCE THE AUTOFLOWERS ARE CHOPPED AND I WILL SWITCH THE LIGHT TO FLOWER THEM IN THERE FOR MORE ROOM FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

27/08/2025 18:00 A lot of days passed from the last time,rain and storm for a full week with a little bit of sun Unfortunately some boars found my spot and destroyed the barrier,another branch of the frostbanger,completely eat one of the Coco fresh and the other one was fallen apart i think she won't survive,even the apricot auto felt down with one side facing the soil,an absolute disaster Wtf did i do wrong in my life 🤬 #1 gorilla z auto,she's going to fiinish soon 2 maybe 3 weeks,smell Is now strong less z terps now the gorilla odour Is coming trough so potent Some pistils are turning brown and the resin Is so thick that i had difficult doing defoliaton #2frostbanger auto,one full branch destroyed on this one i don't know how many grams will i have at the end,heavy defoliation as the buds are rock hard,yes they're already rocks Smell Is just like lemonade with a very tiny creamy gassy flavour,good but not comparable to the extreme resin production Hope the final flavour will become more complex because this is definitively the best weed appeal i ever grown #3 Coco Milk,boars didn't touch her i don't know why Really nice develope trough these days but no pistils yet,strange at the end of august Awesome plant structure did remove only two branches at the bottom and some leaves #4 apricot auto,found her felt on one side ,she will stay small maybe less then 20 g at the end Buds are becoming purple and already has a peachy flavour #5 Coco fresh,the disaster one completely destroyed, found her broken with most of the roots in the air,soil all onto the ground, did the best that i can but i think Is going to die The Little Coco fresh fully eaten,vanished,puff

Hey folks, I have been checking the trichomes, and they have all glazed over white now with some turning Amber. So I am starting to flush with water. I am hoping for a 2 week flush 😀 Some of the branches are falling over with weight, hopefully a good sign. 😅

Thorium (chemical symbol Th) is a naturally occurring radioactive metal found at trace levels in soil, rocks, water, plants and animals. Thorium is solid under normal conditions. There are natural and man-made forms of thorium, all of which are radioactive. In general, naturally occurring thorium exists as Th-232, Th-230 or Th-228. The atomic number of 90 - Thorium 1. Dobereiner’s Triads German chemist Johann Wolfgang Dobereiner attempted to classify elements with similar properties into groups of three elements each. These groups were called ‘triads’. Dobereiner suggested that in these triads, the atomic mass of the element in the middle would be more or less equal to the mean of the atomic masses of the other two elements in the triad. An example of such a triad would be one containing lithium, sodium, and potassium. The atomic mass of lithium 6.94 and that of potassium is 39.10. The element in the middle of this triad, sodium, has an atomic mass of 22.99 which is more or less equal to the mean of the atomic masses of lithium and potassium (which is 23.02). 9 controls the 6 and 3. The Limitations of Dobereiner’s Triads are : All the elements known at that time couldn’t be classified into triads. Only four triads were mentioned – (Li,Na,K ), (Ca,Sr,Ba) , (Cl,Br,I) , (S,Se,Te). 2. Newland’s Octaves English scientist John Newlands arranged the 56 known elements in increasing order of atomic mass in the year 1866. He observed a trend wherein every eighth element exhibited properties similar to the first. This similarity in the properties of every eighth element can be illustrated as follows. Classification of Elements and Periodicity in Properties Newland’s Law of Octaves states that when the elements are arranged in increasing order of atomic mass, the periodicity in properties of two elements which have an interval of seven elements in between them would be similar. Azomite has an average of 180ppms of THORIUM...........I'm fucking mindblown Alot if big things happening this weeeeek plants final form starts to take shape, light defoliation on lower parts of the plants I know make the cut later in life. Going to restrict defoliation to week 2-3. Going more cautious this time round as my excessive defo last grow was tooooooo much and effected yield greatly. Added steel weights 💪. Big buds require a solid frame, I'm still trying to find balance for this part, I'd like to have had the reinforcement done earlier. Ever learning. Can already tell by early flower formations these are going to be madness : AZOMITE: Most farmers have not had a proper understanding of what is azomite and how to use it in gardening, especially if you practice organic farming. Continuous propagation and leaching effects of water deplete the essential minerals and micro-nutrients from the soils. Such soils remain weak, not able to support the production of fruits and vegetables. Azomite mineral contains micronutrients that supplement the soil. It also balances the minerals for growth and overall productivity. Constant use of this mineral rejuvenates your soil renewing its potency again. Azomite is a naturally mined mineral product that is ready to use. It’s a unique rock that comes from a mine in central Utah. Azomite requires no mixing or special preparation before use. It is derived from volcano ash that spewed out millions of years ago. It contains the widest range of minerals of all the rock dust in the world. Azomite provides the plants with 70% essential elements. These elements include magnesium, calcium, potassium, and silicon for plant growth. Facts About Azomite Fertilizer It’s a natural mineral – 100% natural with no fillers or additives Does not contain any harmful elements Requires no special preparation before use It’s odorless – very friendly to use Does not restrict water penetration or aeration Is easily broken down and absorbed into the soil Does not burn plants GREENSAND Espoma Greensand, love Greensand. If you have never used the product (or never heard of it) Greensand is a mineral called glauconite, which is found on the ocean floor and mined for use as an organic fertilizer and soil conditioner. Greensand supplies marine potash, silica, iron oxide, magnesia, lime, phosphoric acid, and 22 trace minerals. Greensand works great on Southern “hard as a rock” clay soil this spring, to help improve its texture, and enrich the nutrient content of my soil without using chemicals. Greensand is one of the oldest and most generally useful tools in the organic gardening tool box. Greensand has been used since the eighteenth century as a soil amendment and slow-releasing fertilizer (0-0-3). It is one of the best certified organic sources of potassium. It comes from sandy rock or sediment containing a high percentage of the mineral glauconite (greenish-black to blue-green). It contains potash, magnesium, iron, silica and can contain as many as 30 other trace minerals. The recommended usage is to broadcast 50 to 100 lbs. per 1,000 square feet. It improves plant health in general and is also be used to loosen heavy, clay soils. It will also improve the moisture retention of sandy soils. Greensand is OMRI listed for organic use. Sea Kelp – Ascophyllum Nodosum Sea kelp, also known as brown algae, is the generic name for the seaweeds that make the order Laminariales. Kelp grows in huge underwater forests in shallow parts of the ocean, with some forests covering over 2230 square miles! Kelp thrives in cold and turbulent ocean water with strong currents that bring enough nutrients for the algae to grow. The coasts of Norway, Japan, Mexico, and California are some of the most abundant in terms of natural kelp density. Sea Kelp BenefitsSea kelp is rich in a wide range of nutrients, minerals, and active compounds. Some of them have great nutritional value, others show antioxidative and anti-inflammatory properties, help with diabetes, and may even fight off some types of cancer. In other words, sea kelp is jam-packed with health benefits. Let’s explore some of them in more detail one by one! Macronutrients in sea kelp Energy – 43 kcal Protein – 1.68 g Total fat – 0.56 g Carbohydrate – 9.57 g Fiber – 1.3 g Sugars – 0.6 g Minerals in sea kelp Calcium – 168 mg Iron – 2.85 mg Magnesium – 121 mg Phosphorus – 42 mg Potassium – 89 mg Sodium – 233 mg Zinc – 1.23 mg Copper – 0.13 mg Manganese – 0.2 mg Selenium – 0.7 mcg Vitamins in sea kelp Vitamin C – 3 mg Vitamin B1 – 0.05 mg Vitamin B2 – 0.15 mg Vitamin B3 – 0.47 mg Vitamin B5 – 0.642 mg Vitamin B6 – 0.002 mg Vitamin B9 – 180 mcg Vitamin A – 6 mcg (116 IU) Vitamin E – 0.87 mg Vitamin K – 66 mcg

After last weeks defoliation I am stoked to see the progress in their growth, opened them up nicely and exposed all the remaining bud sites to some good light 😁... I have around 4-5 weeks left from here, super keen to see what these ladies can do 😁

Update

This week the plants have fully transitioned into the bulking phase. The stretch has finished, and all the energy is now going into flower production. Buds are stacking nicely across the SCROG, trichome coverage is increasing every day, and the aroma is becoming much more pronounced whenever the tent is opened. The canopy remains nice and even thanks to the training during veg, allowing every top to receive strong, uniform light. Some of the older fan leaves are beginning to fade, which is expected as nutrients are redirected into flower development. 📊 Current Stats Overall Week: 16 Flower Week: 5 Light Schedule: 12/12 PPFD: ~800 µmol/m²/s Temperature: 28°C Relative Humidity: 65% VPD: ~1.35 kPa Watering: 2 L per plant every 3 days Overall, I'm really happy with how this run is progressing. The canopy is full, bud sites are developing evenly, and resin production is picking up quickly. From here it's all about maintaining a stable environment, keeping airflow high, and letting the flowers pack on weight over the coming weeks.

Day 83: After being in the dark for like 4-7 days, they where ready to harvest. All plants getting cut by the machine, big buds are cut by hand. I never weight wet buds because that doesnt make any sence. I will update soon on how much it is dry weight. My friend helped me with the harvest since it takes many hours of work. I have many buds that are as big or bigger as my hand. Quallity so far looks promising even thought there are shitty buds as well, but thats normal and oke. They have been cut freshly so I won't lose much weight when cutting. This will happen when cutting dry buds. The remaining small leafs on the wet buds will dry in with the buds and will be barely visible. More info soon.