Chubbing up this week. Nice smells too

Sorry for lack of photos I will upload more on another week to catch up as I am lagging behind through half weeks. Everything is running smooth as hell I love this new lights it is amazing.. reccomend! Good growth plenty of even bud sites can’t wait!

Day 33-40 (May 24th-May 31st) (Day 34) I just found a herm branch on the tight blueberry pheno. It looks like a random pollen sack opened right above a lower branch. I removed the sack but I saw a small amount of dust fall onto one of the lower branches. I’m going to leave it to see if it will pollinate that small branch at all. I spent a good 5 minutes looking closely for bananas or claws but couldn’t find anymore. The main bud is clearly unaffected so I will just leave it unless it is visibly seeding itself. Too bad because I’m really excited for this plant. (Day 36) Not a lot has happened since I flushed them. Growth actually looks healthy and I don’t see any deficiencies on anything yet. (Day 37) Both of these badazz cheese phenos are picture perfect and easily hold up against Canadian and California quad grade. I might try to reveg them at the end and take some clones. They have this unique pungent, grassy, sour milk smell that is just wonderful. The density and bud structure is looking great too. This whole plant will probably take 3 minutes to trim if that. (Day 38) Just found a banana on the shitty blueberry pheno. This pheno is trash and I would honestly throw it away if it didn’t mess up the 3 perfect rows. It has almost no frost, no smell, is airy and has bad structure. I’ve actually never seen a plant with such little frost. Even outdoors. (Day 39) I think most of this tent will be done by day 60 but I will probably ride it out until day 70+. I don’t think the blueberries or the jacks will fill out very much either way but taking it too day 70 will ensure maximum production from each plant.

03/16/2022 All progressing well. We are at 12 + hours of light will not suffer any set back from revegging, fingers crossed. For a girl. Day # 6 updating early this week.

I’m overjoyed with the phenos this strain is producing, strong vibrant purples with some serious flavour profiles! Scent Profiles we have: Candy Lemon Sherbet 🍬🍋 Sweet & Piney Diesel 🍭🌲⛽️ Sweet & Tangy Tropical Punch 🏝️🥊 Alongside this, these beauties are the frostiest and the most insanely dense koala looking nugs I’ve ever produced!

💐💐💐💐💐 SCROG

23.05. today is the end of the fourth week for the plants, they haven't progressed much since last week, they grew a few cm and gained a little weight, but they are healthy, which is the most important thing... in a few days I will transplant them and top them because some of them have already developed the sixth pair of leaves, so I simply have to top them. turned out... I thought of transplanting them into 10-liter pots and after two to three weeks into 50-liter holes, however, the weather didn't cooperate, and I was already late anyway because of the bad weather, and because of the same, my plants in the fourth week were the same as they should have been in the second, and because of the same, I couldn't even transplant earlier... now that nothing went according to the "plan", of course, I don't know how smart it is to transplant them into 10 L and then into 50 with the fact that it is with me the longest day of the year is June 22, so that actually a week after that it can start flowering (it usually starts at the end of July or at the end of August, but it can be late and start even in September, and it also knows how to plow and start already at the end of June)...now I think that it is better to buy smart pots of 50-60 liters and immediately transplant into them and then just bury them...another problem with that is that the soil that I took for vegetation has food in it for a month days, if I transplant twice, it may happen that it enters flowering, and the food for the vegetation has not yet been used up, and that would be a problem...advices are welcome Stay high!!!

This could be last week before harvest. She looks beautiful, very big buds with great shape and smell. No disease or pest present. She didn't turn purple, still, she grew very well and produces a very interesting yield.

New week for the 3th grow It's getting along very nicely must say one is looking better then the other and it's mix bags of sizes to worry about but other then that no troublesome issues what so every Next week going to lower the nutrients and be going into overdrive for next 2 weeks and probably be flushing some after 3 weeks Happy growings Growmies 🤜🏻 🤛🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Sehr erdiger geräucherter Geruch

Week5 the temperatures dropped a bit and I did what I could...❄️❄️ Earlier this week I had to flush this little one because I thought she had nitrogen toxicity. Maybe not... But From the water that ran out I realized that the soil was full of nuts and after the flush I didn't give it any more water. as I use a 12 liter vase, you can imagine how much water was retained in the root system. for that reason and because the water is good quality and has an amount of micronutrients, I didn't have to worry about giving water this week. let's see next week, wish me luck 🤞☺️🌞

Hello Growmies, We're in the third week of vegetative growth with our Epic Buzz plants by Anesia, and they are a sight to behold with their rich green leaves signaling strong health. The growth has been consistent, with new leaves unfurling and the central stem gaining girth, ready to support future flowering. The root development, while not visible, is indicated by the stable and healthy growth above ground. Our watering schedule is on point, with the roots expected to be expanding in kind to support the lush foliage. Feeding these plants has been a regimented process. We've been nurturing them with a mix of Orca, Rhizotonic, and pH-ed water, providing 100 ml of this concoction every three days. The plants are responding well, showing no signs of nutrient burn or deficiency, which is exactly what we want to see at this stage. There have been no issues with pests or environmental stressors, which is a testament to the vigilant care they've been receiving. As we keep our environment stable, we'll continue to see such positive trends in their growth. Looking ahead to the fourth week, we'll keep a close eye on how the plants are reacting to their nutrients. Adjustments will be made if necessary, and we may start to think about training techniques to help them grow wide and ready for a bountiful flowering period. Regular updates will guide us through this process, ensuring that we meet the needs of our Epic Buzz plants and keep them on the path to success. Stay lifted, Salokin

2nd Week Report 24/10/19 - 31/10/19 25/10/19 I didn't flushed, but I filled the reservoir with 3l of 10% strength solution. Added to the current solution the same nutrients quantity as the first week (except for "Root Stimulator" and "Enzymes" that the first week were 20% strength and now got back to 10%). Now the reservoir should be filled with a 20% strength solution 29/10/19 - CMXL is 10cm height and it is growing really well along with his roots. - LSD is 6cm height and it is growing a little slower like his roots, but both of them look healty. I think in some days should start growing fast like CMXL Added 2 low frequency (113kHz) Ultrasonic Piezoelectric Discs: - One for the root chamber that should help with root expansion as it nebulize solution and the fog carries nutriments (like a small aeroponics integration) and will help my attempt of cloning. - One will stand in a 20% solution next to the plants to increase Humidity (and maybe feed them a little). I'll try to set them running 24/7 Switched water pump that sprays Rock Wool from 5sec every 30min to 6sec every 60min. Next week I plan to stop using the pump as "Top Feed" if roots will be well developed and probably I will use it as "Recirculation Pump" to keep nutrients in reservoir mixed better 30/10/19 Roots exposed to air inside reservoir got a little yellow after inserting the small fogger, so I will try to keep it 30/30 seconds ON/OFF. I will check next day if it's helpful to existing root o as root propagator for clone trial Topped CMXL and did a little of LST just by bending the main stem to expose the small growing next to fan leaves. The cutting was immediately dipped in a solution made by honey and Root Stimulation (the same I use for reservoir solution as it should contain rooting hormone), hoping it covers the cut like a gel and don't let the oxigen get in the cut until there will be some new growing. After that I put the cutting on the lid without any pot, as you can see in the picture some tape is covering the hole and it holding the topping. I covered it with a small jar to maintain humidity, hope to see some roots next week ;) I plan to fim LSD tomorrow if tonight grows enough 31/10/19 Filled the reservoir with 6L 20% strength solution and after that added 10% nutriment for 36L directly into the tote (like I did last week). Now nutrient solution inside reservoir should be 30% strength and it's ready for the 3rd week Pinched LSD Top with my fingers and applied LST by bending a little the main stem. Hope this FIMming works and returns better yield ;) Cloning trial didn't worked (I was expecting nothing, just a test), the cut part of the topping is already dry. I knew the topping was too short, next time if I try to clone his stem will be at lest 2cm Last Update 31/10/19 Next Update 03/11/19 with the next week See you guys ;)

Started this week with a DIY trellis net that has really opened the canopy, now covering almost 80% of the tents foot print with colas! Some real nice smells while twisting and bending the branches to shape the net. In super soft water area (40ppm) so adding cal/mag to water to bring ppm up to 100ish.

Definetly an awesome Strain easy to grow with a phenomenal trichome production even the stamps are covered in trichomes 🤷🏻‍♂️💚🤙🏻🤙🏻❄️💯

The High intensity was to strong (clearly my fault) in the beginning which stunted her overall stretch, she however still delivered super dense, terpene and trichome loaded buds.

Buds are thickening but i’m not sure if starting to flush or continue to fertilise, maybe I should continue to fertilise just a few days more and then flush. Any advice?

420 Fastbuds Week 9 Gorilla Cookies Auto Week 9 update for these two temperamental girls. They absolutely did not like the feeding I gave them a few feds back. Over all besides the yellow and crispy leafs they appear to be growing good. I'm only going to give them maybe two more weeks before they get the chop.

Que pasa familia, vamos con la tercera semana de vida de estas Papaya Zoap F1 de Sweetseeds. Vamos al lío, de las 4 plantas, me quedaré con 3 por espacio, siempre pongo alguna semilla de más por si no abriese alguna por no perder ese hueco del indoor. También se trasplantaron a su maceta definitiva, en este caso de 7 litros. El ph se controla en 6.2 , la temperatura la tenemos entre 20/22 grados y la humedad ronda el 50%. Hasta aquí todo, Buenos humos 💨💨💨