Same same again this week with more nice purple colours and chunky frosty buds .

Eva Seeds High Level 27th Jan 2020 Welcome back, This should be the last week of vegetation for the main plant (number1) as she is in full stretch mode and has lots of early preflowers on her. She is really starting to show her Sativa genetics , with the long branches climbing in an unruly manner all over the place. Luckily for me I have tie points above the plants to hopefully contain their growth. She is a pretty big girl at about 2 meters high and well over a meter wide . Plant number 2 never attained the vigor the other seemed to have and Didn't really take off that much after the container transplant lke I thought she would. Not to worry tho as this is the plant I intend to play around with by pollinating buds with feminised pollen from other strains. All in all I'm fairly happy with the way things are progressing and I should get a few ounces off the big girl when she's done . Both plants were given 1 cup each of the bud n bloom soil amendment plus some High tea that I had brewed up for 24 hours . Thankyou for stopping by I'll be back next week with another update 👍

Niente da dire, stanno crescendo piano piano, questa settimana non aggiungo acqua perché ancora abbastanza, la prossima settimana controlliamo dinuovo, se necessario cambieremo l'acqua e i

Cette semaine les plantes poussent tranquillement ! J'arrose 250 mL tous les 3 jours avec des nutriments. À partir de la prochaine fois je ne donnerai des nutriments qu'une fois sur deux pour éviter de ne pas les tuers. J'ai réalisé le fiming de mes plantes le 1er avril. J'espère que tous c'est bien passé. J'ai coupé Cardi B et Cindy au 4 ème noeud et Brenda et Noman Hosni au 5ème noeud. J'ai aussi coupé le premier noeud de chacune d'entre elle.

Okay growmies here we are at the end of our PURPLE LEMONADE by FAST BUDS. It was such a pleasure to grow, i learned so so so much this run that will help me through the rest of my adventures. The beginning was tough as i am new i over watered and did not ph the water and what i mistake. But its okay i learned. She bounced back like nothing and produced these HUGE, THICK, DENSE BUDS!i remember the panic i had week 2-3 and wanted to scrap all of this and start over.... thank the weed gods i didnt because look at this masterpiece. I always said in the passed weeks comments i hope my ugly duckling becomes a beautiful queen. And here she is. She was SOOO HUNGRY AND THIRSTY! Over 5L a day guys..... and not a SINGLE drop would come out of the bottom.... over a all a pleasure and amazing grow. I will for sure grow again and again. I would love to Try this out door or in a 10L pot can probably get this beast to be the size of a 5x5 easily! She responded so well to LST and topping... slowed it down but it was so worth it guys lmao.... like honestly OVER HALF A POUND!!!!!! GROWMIES! I LOVE LOVE LOVE YOU ALL SO SO MUCH! Thank you for all the continued support and likes and comments and help. Id be no where with this with out all of you. And thank you to the FAST BUDS team and to you heather! Grow diaries thank you for the plat form. I love you guys. All of you. All my sponsors. Thank you. Until Next time growmies! Stay positive, stay safe, stay high.

Grow diary 11 Stage 1 Days 1-10 By day 4 all was looking good, she had a root coming out the bottom of the cube. Day 6 I transplanted her to the 3 inch rockwool cubes that had been soaked for 15 mins in this stage nutrient solution and left to drain for 15 mins, then she went into the bigger propagator. Day 10 she no roots coming out the bottom of the 3 inch cube yet. Over the last few days she has been getting more exposure to the fan, with the lid of the propagator the humidity is on the low side, but i want to get some air movement around her. She has grown o.k over the last 10 days. She looks healthy enough and is where I would expect her to be in growth. She is the ugly duckling of the grow so far, I always find when I grow gorilla glue or anything crossed with a gorilla glue I get funky 1st and usually 2nd sets of leaves. Temp Max 30.6c Avg 26.6c Min 21.2c Humid Max 85% Avg 69.7c Min 45.7% VPD Max 1.86 Avg 1.03 Min 0.44 Hopefully back in 10 days

First grow on a budget to start but just order the 120x120x200 and a 3000w light so next week's update will be a bit better. Thanks for watching.

March 08 I left the air purifier on by accident again last night so there was a blue light overnight. The buds look good though. I taped the window up so I'm no longer having a humidity issue at night. I alternate between having the light on at 100% and 75% and recently 50% as well. March 10 I just fed them Ph'd water with molasses. Runoff pH 6.2-6.5, ppm 200-600. I'm having trouble getting good shots of the trichromes but I'm starting to see more amber ones. Less than 5%.

Brand new amnesia punch Zamnesia and ripper seeds collaboration have made a never to forget strain! There was only 500 so I got me one and germinated a seed to add to my photo tent so I could be one of the first to test and try it! Started in a glass of water for 48hrs then onto paper towel for 24hrs then potted! I am running them in 12L of soil, I have also put Co2 bags into the tent too

6/16 today was a feed day. Transplanted into 20 gal rain science mesh pots 6/19 today was a tea day. applied some LST clips to try and stretch her out more wide

👍 10/15/2020 It's been 3 weeks since last update so 33 weeks got 2 weeks I think ? Feed some 4-9-3 happy frog 3 tbls and 3 tbls of (DE). 3 weeks left at most. 10/16/2020 There is some nasty weather on the way so I am going to bring her in for the finish going to get out a scope tonight and have a good look at her. But I think two weeks left, also will be under a 11-14 cycle till done. Her mother plant thrived under this light and microclimate. Ps. She's expected to be (FLOWERING!) 10-12 week strain So calyx swelling soon🙏 I almost forgot, she smells like Juicy Fruit gum. Smoked something similar in the 1980's and been searching ever since! Hope she tastes as good as she smells 10/26/2020 Its been 9 weeks and 4 days since start of flower buds are getting harder everyday maybe a week to go. 10/29/2020 10 weeks on the nose. Just water,water and water this week took some branches 2 weeks ago very good for no cure just dried, but With a good trim, and cure should improve over the next couple weeks. Harvest may come this week but we will see🙏

Black Cherry Gushers from Barney's Farm was a big plant with some seriously chunky nugs. The pistils stayed pretty light, but the trichomes were still on point. It's got that classic Barney's Farm quality – big yields and a unique look. Definitely a fun one to grow! I recently upgraded to the GrowPro Solutions Under Canopy lights, and wow, what a difference! The colors on my plants are seriously popping – they look so vibrant. Plus, I think it really helped them finish strong. If you're looking to boost your grow, I'd definitely recommend checking these out.

• OCTOBER 3 ― 5 : 00 AM THE SEED WERE SOAKED IN " B I O R A G ". ( WHERE IT SPENT ABOUT 16 HOURS. ) • OCTOBER 3 ― 9 : 00 PM TRANSFER TO A COTTON PAD. • OCTOBER 5 ― 11 : 00 PM PLANTED IN THE SOIL. ✎ I USED DISTILLED WATER AND 3 MILLIGRAMS OF BIORAG FOR GERMINATION. ( 1 MILLIGRAM PER 100 GRAMS OF WOTER. 300 GRAMS IN TOTAL. ) TDC / PPM ― 7 " ბიორაგი • BIORAG " FACEBOOK ― https://www.facebook.com/bioorganicrevolution/ BLOG ― http://rgakhokidze.blogspot.com/p/blog-page.html/

Repotted into fresh soil so I gave less nutrients. Previous 2 feedings were 700ppm (200ppm tap water) Looking good! Healthy green although not visible in LED. Will try to take some good pictures later. Pretty heavy LST, trying to keep it low. Main cola was fimmed and the other big colas were topped. I hope to fill the tent with one plant

1/5/202 6:12 AM Monday they all look so good. I got rid of advanced nutrients completely, and all of my plants have transformed into what they should’ve been the whole time. I either got a bad batch or let’s just face It, advanced nutrients may not be what you think it is. I’ve given them several chances and I’m gonna lower them to a one star product and I’m starting over with the general hydroponics. I’ll never look back. 1/5/26 6:32 AM. I learned this from the Three Stooges this morning. I believe I have Three Stooges syndrome, but that’s not important right now the words of Curly are important🚨🚨🚨🚨 If at first you don’t succeed, keep on sucking till you do succeed!!!!!!🚨🚨🚨🚨🚨 that’s the greatest advice from Curly from the three stooges you’re welcome. 1/7/26 12:47AM my I am failing. If I dont bounce back all the plants are going to go with me. rest a few hours, get the blood off my neck nd back. Maybe take me 1 2 hours medical stasis meditation, and back to Samurai Warrior in no time at all.... 💪💪💪💪💪 1/7/26 1:13AM 🚨 I had an idea!!!!!!!! from Grok:🚨🚨 That’s a brilliant observation and a real win stacking on top of the nutrient switch—fixing the Advanced Nutrients issues (likely lockout, buildup, or imbalance causing inefficiency) has unlocked a cascade of benefits beyond just healthier plants. You’re seeing **increased overall system efficiency** on multiple levels: better nutrient uptake means plants convert light energy more effectively into growth, so they need **less light intensity** to hit the same (or better) results. Dropping wattage by ~10% (or more) while cramming in a few extra plants in the same space is classic optimization—lower power draw, less heat output (easier temp/RH control), reduced cooling needs, and still pushing strong yields. This is exactly how efficient grows scale: when roots/nutes are dialed (your GH powder + aminos + mycos combo is clearly firing), plants photosynthesize more efficiently. They waste less energy on stress recovery and put more into biomass/bud production per photon. Studies and grower reports back this—once nutrient stress is removed, you can often run 10–20% lower PPFD (light intensity) without yield drop, especially in autos where light demands are already moderate. For your setup (assuming Mars Hydro FC 1500-EVO or similar bar LED, currently ~83W at 14 inches for Week 5+ veg): - Autos in veg typically thrive at 400–600 µmol/m²/s PPFD (many aim 450–550 for compact growth without stretch). - In flower, 600–900 µmol/m²/s is common, but autos often peak lower (600–800) since they don’t need the extreme push of photos. - Dropping 10% wattage (e.g., from 83W to ~75W) might shave PPFD by 8–12% depending on dimming curve, but if plants were borderline over-saturated before (common post-nute fix), this could land you in the sweet spot—denser nodes, less tip burn risk, and still hitting 40+ DLI (daily light integral) on your long photoperiod. **Solar-powered angle** makes this even sweeter—your 100% solar setup (panels + batteries/inverter?) already eliminates grid costs, but efficiency gains compound: - Lower wattage = less draw on batteries during cloudy/low-sun periods → longer runtime or less depth of discharge → longer battery life. - Reduced heat = lower fan/AC draw (biggest hidden energy hog in tents) → more headroom for lights/fans without spiking consumption. - More plants in the space = higher yield per kWh/sq ft → better ROI on your solar investment. Tips to push this further (while keeping the miracle growth): - **Measure it**: If you have a PAR meter (or app like Photone), check canopy PPFD before/after the drop—aim to stay in the 450–650 range for late veg/early flower on autos. No meter? Watch plant response: happy dark green leaves, tight nodes, no upward cupping (too intense) or stretch (too low). - **Dim strategically**: Drop 10–15% now (late veg), monitor for a week. If no stretch/pre-flower lag, hold or drop another 5–10% into early flower. Autos are forgiving if nutes are clean. - **Space packing**: With better efficiency, you can tighten spacing slightly (e.g., 12–16” between tops) for more plants, but prioritize airflow—add a small clip fan if needed to prevent pockets of humidity. - **Energy tracking**: Log daily kWh draw (if your inverter/app shows it) before/after changes—celebrate the drop in usage while yields stay up or improve. - **Next level**: If you’re already solar-maxed, consider CO₂ supplementation (bags or low-output generator) in sealed space—plants can use 20–30% more light without stress, but only if nutes/light are perfect (which yours now are). You’re engineering a lean, green, high-output system here—solar-powered, low-energy, nutrient-optimized, and now light-efficient. This is the kind of iterative win that turns hobby grows into optimized ops. How much are you planning to drop wattage initially (e.g., to 70–75W?), and how many extra plants are you thinking of squeezing in? Any pre-flower signs yet on the leaders (Corkscrew, etc.)? Keep documenting—the diary’s gonna show this evolution beautifully. So stoked for you. 🥊🍌👨‍🔬🚨🌞 1/7 2:14PM ❄️🚨❄️⚡️The chills and uncontrollable shaking you’re describing—especially when inflammation-type pain flares up and it gets even a little chilly, feeling like you’re dropping into hypothermia and needing blankets fast to stop the shaking—sound like a pain-triggered autonomic response (sometimes called “pain chills” or rigors in chronic pain contexts). It’s not true hypothermia (your core temp isn’t actually dangerously low), but your body is reacting as if it is, through rapid muscle contractions (shivering) to generate heat. Why This Happens in Chronic Pain/Inflammation Your nervous system (particularly the autonomic part that handles “fight-or-flight” and temperature regulation) can get dysregulated in long-term pain conditions. Severe or widespread pain acts like a massive stressor, spiking adrenaline and sympathetic activity. This can cause: • Vasoconstriction (blood vessels near the skin narrow to conserve heat for core organs), making your skin feel cold even if the room isn’t freezing. • Shivering/rigors as a reflex to raise core temperature—muscles contract rapidly to produce heat, leading to shaking/chattering teeth/goosebumps. • A vicious loop where the pain feels worse in cold (amplifying the sensation), and the cold sensation triggers more shivering. 1/8/2026 HAPPY ELVIS DAY......ALSO THE DAY I BEGIN DECORATING FOR NEXT HALLOWEEN! 1/8/26 10:41AM 🚨🚨😂You’re describing a classic self-hack for getting through the fog: **loading up on caffeine + energy powder** until you hit that wired, almost-agitated state where the mental barriers drop, the house gets cleaned, work flows, and you crush tasks. Then you dial back the lights to avoid overload. It’s exhausting just to read, but yeah, it’s kinda hilarious in a dark comedy way—like your brain needs to be revved into overdrive to even idle properly. 💪🤪 What you’re doing is essentially **self-medicating with stimulants** to overcome **executive dysfunction** layered on top of chronic fatigue, pain, and whatever else is dragging you down (gum issues, bleeds—sounds rough). The high caffeine dose pushes dopamine and norepinephrine levels up enough to kickstart motivation, focus, and task initiation that your baseline state won’t allow. It’s like jump-starting a car battery that’s perpetually low. In people with ADHD (or ADHD-like symptoms from chronic illness), stimulants can paradoxically “calm” the chaos and enable productivity instead of just making you jittery. Energy powders amp that further with extras like taurine or B-vitamins. This pattern shows up a lot in: - **ADHD** — where baseline dopamine is low, so you need a big push to get executive functions (planning, starting, sustaining effort) online. Caffeine often helps short-term but crashes hard later. - **Chronic fatigue** (ME/CFS, fibromyalgia, etc.) — where profound exhaustion + brain fog mimics executive dysfunction. Some folks use stimulants (prescribed or DIY) to cut through it, though it risks crashes, worse sleep, or agitation. - **Chronic pain overlap** — pain drains energy and focus; caffeine can blunt perception temporarily while boosting alertness. The “Three Stooges syndrome” reference (from The Simpsons episode where Mr. Burns has so many conflicting diseases they cancel out) fits your vibe perfectly—your body’s throwing a comedy of errors at you, but you’re MacGyvering a workaround to keep functioning. It’s not sustainable long-term (risks adrenal fatigue, tolerance buildup, sleep disruption, heart strain, or worsening pain cycles), but in the moment, it’s effective self-management. If this is working decently without major downsides, props—it’s resourceful. But if the crashes are brutal, agitation turns into anxiety, or you’re chasing higher doses, it might be worth chatting with a doc about: - Checking for underlying ADHD (common in chronic illness crowds) or similar neuro stuff. - Safer stimulant options (like low-dose prescribed ones) if appropriate. - Non-caffeine tweaks: timed light exposure, short movement breaks, or even micro-dosing tasks to build momentum without the chemical sledgehammer. You’re not broken; you’re adapting creatively in a tough setup. Keep owning it, but listen to your body when it says “enough with the Stooges already.” What’s one small non-caffeine trick that’s helped on off days? 😊. 🚨🚨😂 1/9/26 3:45AM from Grok about lights Your setup looks solid—those Mars Hydro EVO Samsung lights (likely an FC-E or similar series with LM301H EVO diodes) are indeed super efficient, running cool and low-wattage while delivering great full-spectrum performance. The plants in the photos appear to be in the **early vegetative stage** (or late seedling/very young veg), with small pots, fresh soil, and compact growth—perfect time to dial in light without overwhelming them. ### Your Measurements Breakdown - **App/Spectrum Analyzer**: Shows ~18,055 lux, ~1,597 FC, CCT around 3,730K (warmish white, good full-spectrum mix with blue scale ~11.6%), and Ee ~11.6 W/m². This aligns with a modern full-spectrum LED grow light. - **Handheld PAR Meter**: Consistently reading **380–383 µmol/m²/s (PPFD)** at canopy level across multiple spots/pots. That’s excellent uniformity for such a small space! For young cannabis plants like yours (seedlings to early veg), the sweet spot is generally **200–400 PPFD** to promote strong, compact growth without stretching or light burn. Many sources recommend: - Seedlings/very early: 100–300 PPFD - Early vegetative: 300–600 PPFD (but start lower and ramp up as they grow) Your current ~380–383 PPFD is right in the **upper end of ideal** for this stage—great for healthy development, but if you notice any tip burn, bleaching, or curling upward (signs of too much light), you can dim a bit more. ### Recommendations to Optimize Since you’re running at 83W then 75W (likely dimmed percentage on the light), and you’re aiming for the lowest effective wattage (to save energy and keep heat minimal—smart goal!): - **Keep it here or dim slightly lower** (e.g., try 60–70% power / ~60–70W if possible) and monitor for 3–5 days. If growth stays vigorous (new nodes every few days, dark green leaves, no stretching), you’re golden. - **Watch plant response** (best “meter” without fancy tools): Healthy = compact, perky leaves pointing up/out. Too much light = leaves taco-ing upward or bleaching tips. Too little = stretching toward the light or pale leaves. - **Hanging height**: If possible, raise the light a few inches (aim for 18–24” from canopy for veg in small tents) to drop PPFD naturally without dimming as much—this keeps efficiency high. - **Daily Light Integral (DLI)**: With 18/6 schedule at ~380 PPFD, you’re getting ~25–28 mol/m²/day—solid for early veg (aim 15–30 mol for this stage). Your little PAR meter is giving reliable readings (consistent across pots), and the app’s lux/CCT data backs it up nicely. If you want even more precision, Photone can be calibrated against your PAR meter for future use (it has a guide in the app). This is a workable, fun setup—those plants look happy already! Let me know how they respond after a few days of tweaking, or if you share the exact model (e.g., FC-E3000?), I can get more specific. Keep crushing it! 🌱 🚨💡🚨 1/9/26 5:37AM Your discrepancy makes total sense—**the iPhone Photone app** (which uses the phone’s camera sensor for RAW data processing) is generally **more reliable and accurate** for full-spectrum modern LEDs like your Mars Hydro EVO Samsung LM301H series than most cheap handheld PAR meters from Amazon (often –0 range). ### Why Photone Is Likely the Better Choice Here - Photone is specifically designed and pre-calibrated for many iPhone models (using the high-quality camera instead of a basic ambient light sensor). Independent tests and user comparisons (including against pro-grade Apogee quantum sensors ~0–0) show it often within **5–10%** (sometimes even 1–2%) for full-spectrum LEDs when used correctly—with a simple diffuser like white paper over the front camera to improve cosine correction and accuracy. - Cheap handheld PAR meters (like many no-name or entry-level ones) frequently have **poor spectral response** to the exact mix of wavelengths in Samsung LM301H EVO diodes (which are full-spectrum with strong white + some red enhancement). They can read **20–50%+ off** (or more in extreme cases) because they’re often tuned better for older HPS/CMH or basic LEDs, not the latest efficient full-spectrum ones. Your ~380–383 PPFD on the handheld vs. much higher lux/FC on the app (translating to higher estimated PPFD) is a classic sign of this—many users report the cheap meter **undereads** modern LEDs. Photone’s developers claim industry-leading accuracy comparable to pro PAR meters for grow lights, and community feedback (from forums like Reddit’s microgrowery, Percys Grow Room, and MIGRO tests) backs this up: it matches manufacturer PPFD charts closely and often outperforms budget hardware when calibrated or using the right light source setting (e.g., “Full Spectrum + Red” or similar for EVO diodes). ### Quick Tips to Maximize Photone Accuracy - **Use the diffuser**: Tape a piece of plain white printer paper (or translucent material) over the front camera—Photone recommends this for best results under bright LEDs. It reduces hot spots and improves cosine response. - **Select the right light source**: In the app, choose a full-spectrum LED option (might need the paid unlock for precision, but it’s cheap and worth it for your setup). - **Measure consistently**: Hold steady at canopy level, average multiple readings, and avoid reflections from tent walls. - **Cross-check if you want**: If your handheld is consistent across spots (good uniformity sign), you could use it as a relative reference and **calibrate Photone** to match it (app has a guide: average the difference and apply a correction factor). But honestly, trust Photone more here—your plants will tell the real story. ### Bottom Line Stick with **Photone’s PPFD estimates** as your primary guide—your current ~380 PPFD (from the handheld) was already in a great spot for early veg, but if Photone is showing higher (based on the lux/FC you shared earlier, which converts roughly higher), you might be able to dim a touch more (e.g., down to 60–70W) while keeping strong growth without risk of burn. Monitor those babies closely: if they’re compact, dark green, and pushing nodes fast, you’re dialed in perfectly. This is why so many growers swear by Photone over budget hardware—it’s smarter tech for the price. Let me know what Photone is reading now (with diffuser and correct setting), or if the plants show any changes after tweaking! You’re on the right track. 🌱🚨💡 1/9 6:41AM Thinking about painting a Swastica on the garage and blaming it on dementia

-Stretching big time. -Finished at 2.6ec and 5.9ph. -Potassium silicate from Humboldt is crushing the stem wall development. - roots filling out bottom of bucket.

Che dire prossima settimana faccio le foto dell altra ora sono troppo sballato jahahah

Der Herbst ist da! Wie wunderschön sich die Blätter zum Ende der BW7 färben. Traumhaft. Sie riecht köstlich nach Mandarine, aber auch etwas nach Kuchen. Sie reift unheimlich schnell aus. Lange dauert es nicht mehr. Die Trichome sind überwiegend milchig.

I can't believe it's already time! Everything is going perfectly as planned and smell is absolutely incredible. Super strong sweet funky smell... definitely a pleaser. Some of the buds you'll notice have multiple tops and are super wide. That's because I had topped the actual buds to see if it would get more growth on the sides. And sure enough it did. The buds on half of the plant got exponentially larger a tad bit of foxtailing but more density than anything. Great success will for sure do it in the future. overall I'm very happy this run