Sep 9th flipped to flower

🔥🇩🇪Daily updates.🇩🇪🔥 I am open to suggestions for improvement. Write me if I do something stupid. I know that not everything is perfect, but I try to make the best of my circumstances.🤓 ——————————————————————————— Germination 01.04.24 - 07.04.24 Vegetation08.04.24 - Today 🗓️ ---------------------------------------------------------------------------- 🌱Day 15 || 😎 Everything is going great so far. I made a time-lapse recording after watering. Have fun with it. 100ml distilled, 300mlEasyGrow, 100ml distilled Humidity 53%// 26°C Light 40% //45cm//420-440PPFD 🌱Day 16 || Watering not necessary Humidity 52%// 26°C Light 40% //45cm//420-440PPFD 🌱Day 17 || I have repeated my watering routine from two days ago 100+300+100. during this time I noticed that some of the leaf tips were slightly yellow. Hopefully this is not a major problem. 🤔(Maybe a slight over fertilisation.) I have already asked a question about this and hope for the best.🙏 Humidity 53%// 26°C Light 40% //45cm//420-440PPFD 🌱Day 18 || The new leaves that have emerged all have a small yellow discolouration of one to two millimetres at the tips. These spots have not become "bigger" in the last 24 hours. I will water again tomorrow with pure distilled water. I hope to be able to start LST in the next few days. She is currently 10 cm tall and the leaf spacing is very close together. Humidity 52%// 25,5°C Light 40% //45cm//420-440PPFD 🌱Day 19 || She had a favourable growth spurt in the last 24+ hours so that I could start with the LST. I only watered her with 600ml of distilled water today. Almost three days have passed since the last watering. (66h) Humidity 52%// 25,5°C Light 42% //45cm//440-455PPFD 🌱Day 20 || Happy 420😁 Watering not necessary Humidity 52%// 25,5°C Light 45% //42cm//460-470PPFD 🌱Day 21 || Lots of yellow tips but the new leaves look better. Watered her with 1200ml of distilled water Humidity 52%// 25,5°C Light 50% //50cm//490-510PPFD

Patiently waiting and watering.

UPDATE mid week spoted smnth on the soil that turned out to be a polinator. When inspected the plant found them all over. Especialy in the lower btanches. But on mostly all of branches, they are blendong in with lower buds very tight making them hard to clear. I belive there still some left. And most probably they are going to keem emerging. 3rd week of flowering - looks good. Hairy and even a bit frosty already. I was wrong about water consumprion. Although I managed to put 2 liters at a time and the fabric pot held it, it was too much, the soil was wet for around 4 days. And the humidity in my 50 by 50 cm 1 meter high tent was 99%. So wattering back to 1 liter each second day, just right. Starting to think that maybe in couple of weeks I will need to remove some fan leaves as it realy is quite bushy and when buds will start to swell and get dencier I will need to addres humidity concearns

My 3 week estimate last week might be a little long. Thinking 1 more week maybe. It's going cloudy pretty quick. We'll see how the week goes. Tried to clean up a little more between branches today but the canopy is pretty ridiculous for only 3 plants(really two and a half since #2 got a little stunted from the early root rot). I really should have been more aggressive skirting out the lesser undergrowth. I left it because it managed to stretch to canopy level but it's really choked up some areas. Buds are basically laying on one another when you get deeper in. Gonna be plenty of fluff for extracts.

La planta se empezó a estirar y a mostrar sus primeros pistilos y ya empieza a marcar esas puntas que irán florando

🌿 Permanent Marker – Pheno #1 | Harvest Report (Part 1) (Week 13 From Seed / Week 9 Flower — The Tall Mama’s Story) ⸻ 🌟 A Gentle Apology To Start… Before diving into this week’s update, I want to offer a small apology to everyone following this diary. Because of the new file limitations, I once again had to divide the harvest and trim documentation into separate weeks. This pheno was massive, and naturally… she produced an unbelievable amount of media — photos, videos, details from every angle. So to avoid losing anything, here is Part 1 of her harvest story. Thank you for your understanding, and thank you to GrowDiaries for continuing to improve the platform. 💚 ⸻ 🌸 Harvest – Pheno #1 (The One Who Aimed for the Moon) If Pheno #2 was compact elegance, then Pheno #1 was pure cosmic energy. From the moment she started stretching, she refused to stop — tall, powerful, expressive, and full of character. And in the end? She delivered 249 grams of dry, cured, beautifully aromatic medicine. A true queen. What defined her: • Thick, dense, resin-rich buds • Rich coloration during late flower • Loud aroma that filled the dry room • A structure that felt sculpted rather than grown Even though she stretched to the stars, her bud formation was surprisingly compact and tight, even tighter than her sister’s. Different phenos, different personalities — and both extraordinary. ⸻ Drying & Trim (Narrative Summary) Pheno #1 followed the same journey as her sister: – harvested whole – hung as a complete plant – left to dry naturally in stable conditions – trimmed entirely by hand with scissors and fingers – every bud selected and shaped with care – stored and cured properly in Grove Bags Her weight settled at 249 grams after cure — clean, stable, fragrant. During trimming and curing, her personality truly revealed itself: Floral elements, deep sweetness, that unmistakable Permanent Marker sharpness, and an intensity that promises beautiful experiences. The volume of resin was immediately noticeable — sticky fingers and loud aromas from the moment the scissors touched her. ⸻ 🌈 Aroma & Expression Even before final cure, she was exploding with character: – louder terpenes than expected – thick resin presence – bold colors in late flower translating into rich tones in the final buds – beautifully clean burn and expressive flavors She truly embodies the lineage she comes from. ⸻ 🌿 Why This Update Is Split Simply put: she was huge — and I documented everything. With GrowDiaries’ new upload restrictions, it’s safer to do this in two parts than to risk losing files halfway. Part 2 will come next week, with the remaining photos, videos, and impressions from her drying and curing evolution. ⸻ 🏆 Dognabis Cup – A Little Reminder The Dognabis Cup continues beautifully. Growers are posting diaries, sharing updates, and supporting each other. If you haven’t checked them out yet, I invite you — the links are already added in the diary. Cup Deadline: January 31st Plenty of time, no rush, grow at your own rhythm and enjoy the process. This Cup is about joy, honesty, community, and celebration — not pressure. ⸻ 💚 Gratitude & Community A huge thank you, from the heart, to: Zamnesia Seeds, Ocogenectica Seeds, Aptus Holland, ThinkGrow, Future of Grow, Skunk Magazine, FOG, GroveBags, DaggaDNA, Popeyes Passion, Imperial Seeds, TrolMaster And to everyone who follows this journey — the supporters, the critics, the lovers, the haters, the curious ones, the passionate ones. Every one of you adds something to this space. ⸻ 🌟 Closing Line “Some phenos grow toward the light, some stay close to the earth — but each one teaches us something about patience, beauty, and ourselves.” Come join me on Discord, Instagram, and visit the Cup diaries — the links are already attached there for you. Dognabis#09P - https://growdiaries.com/diaries/285981-grow-journal-by-sadhus dognabis #15 Dognabiscup Permanent Maker- https://growdiaries.com/diaries/288896-grow-journal-by-crazystrahle Dognabis#16P - https://growdiaries.com/diaries/285519-grow-journal-by-fabisfinest Dognabis#017P - https://growdiaries.com/diaries/285851-grow-journal-by-highgrower0711 DOGNABISCUP #18 P. - https://growdiaries.com/diaries/265751-grow-journal-by-develgrow DOGNABISCUP #18 A. -https://growdiaries.com/diaries/285549-grow-journal-by-develgrow 🐺 Dognabis#19A 🐺 - https://growdiaries.com/diaries/289566-grow-journal-by-marijuanaut?lnk=2066296 Dognabis Cup (#21) P- Photoperiodic - https://growdiaries.com/diaries/285531-grow-journal-by-mrs-larimar Dognabis#22A https://growdiaries.com/diaries/287996-grow-journal-by-daves-garden710 Dognabis #22P https://growdiaries.com/diaries/287990-grow-journal-by-daves-garden710 Dognabis 035 Permanent Marker (Zamnesia) - https://growdiaries.com/diaries/278319-grow-journal-by-dogdoctorofficial example diary not entering Dognabis #811A Jealousy Diesel Auto https://growdiaries.com/diaries/287216-grow-journal-by-philhsy 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. • GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial • Instagram: https://www.instagram.com/dogdoctorofficial/ • YouTube: https://www.youtube.com/@dogdoctorofficial ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: • Genetics, gear, nutrients, and more – Zamnesia: https://www.zamnesia.com/ • Environmental control & automation – TrolMaster: https://www.trolmaster.eu/ • Advanced LED lighting – Future of Grow: https://www.futureofgrow.com/ • Root and growth nutrition – Aptus Holland: https://aptus-holland.com/ • Soil & substrate excellence – PRO-MIX BX: https://www.pthorticulture.com/en-us/products/pro-mix-bx-mycorrhizae • Curing and storage – Grove Bags: https://grovebags.com/ ⸻ We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 NEW - Official Server Invite Link : https://discord.gg/ksjAkA5T74

ALL THESE PHOTOPERIODS WILL GO IN THE 8X8 TENT ONCE THE AUTOFLOWERS ARE CHOPPED AND I WILL SWITCH THE LIGHT TO FLOWER THEM IN THERE FOR MORE ROOM FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

The grape is still a little slower than her sister but was last time and she’s destined to be a smaller plant it’s in her genetics! Her max height is 120cm and that’s what I’m aiming for! The purple urkle is thriving! She’s growing an inch a day or so and producing so many extra branches! Thanks to dynomyco! I have added a new light in there too! Mars hydro TSW2000 so will get a better yield! I literally have no light loss! I’ll be flipping anytime soon now! As my elder girls are at 6 weeks nearly! I’ve also added a transparent PNG logo for WeedSeedsExpress for anyone else growing there strains just save the picture directly! And you can overlap it on videos and photos!

The little plant is growing well in height and width This week I used a liter and a half of water I put two tablespoons of horse manure on pallets on top and covered it with normal substrate I increased the brightness to 10000 Luxs I keep the distance of the LED 50 cm from the plant Started LST plant training

Day 57 - Yesterday I noticed that the leaves are darker than they should be, so I re-made the mixing solution lowering the PPM from 750 to 550. I've tried to raise it to see how much nutes that ladies can handle since it's my first time in coco and I like to experiment. Now I'm going to finish this mixing solution and then stabilize the next ones on 650 PPM. Keep learning every day 🙏 Day 60 - Today I added one extra equivalent 75W LED to give the lower nodes more power. Some fan leaves touch it, wish they will not burn. New update in the next days.

Day 12, more and more flowers appearing everyday. Still looking healthy, but might have made her too big for her container. She’s drinking 3 gallons or more a day at this point.

Giorno 42 Un po' di caldo per le Jack 47 Xl mentre le altre piante stanno abbastanza bene. Ci vediamo settimana prossima 🖐️ ❤️

Absolutely love this strain

😇😇😇

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Umstände.