Recommended
Likes
Comments
Share
@FoTwenny
Follow
•••••••••••••••••••••••••• Oct. 24 - Oct. 30 •••••••••••••••••••••••••• 👩‍🌾 SOWED: Aug. 9th 🕛 12/12 START : Oct.1st 🗓️ WEEK 5 of FLOWERING 🏁 ESTIMATED FINISH: Dec. 3rd •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• WEEKLY SUMMARY: •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 🙋‍♀️Fo' Twenny here!🙋‍♀️ Back with this week's update on our mostly Indica 🔵🔵 BLUEBERRY cultivar bred by DUTCH PASSION SEEDS! I am trying a new format for the weekly summary portion of my diary. Let me know what ya'll think! 👃 AROMA: Her aroma is fairly strong for this stage of flower. Blueberry dankness all the way! I look forward to experiencing the evolution of her terpine profile. One of my favorite aspects of growing cannabis is how much these plants change from start to finish and how much variation is possible with this plant. ❇️ BUD STRUCTURE: She is stacking on big round mounds of calyxes and looks like she is going to have large dense buds! 🎨 Color: She is a lighter almost an olive shade of green, right now. Her bright white pistils have a distinctive yellow hue to them. 🌿 STEM, STRETCH, & INTERNODES: She stretched more than I had expected. She has thick stems and relatively tight internodal growth. She definitely looks Indica in her bud structure. ✂️ TRAINING/PRUNING: I have continued selective defoliation as needed to avoid crowding herself and her neighbors. I remove no more than 25% of foliage at any one time, and usually closer 10-15%. I space out defoliation with a minimum of 3 days between sessions, in most instances. There will be exceptions to that, but this is a good rule of thumb I try to adhere to. She has been trained to have 6 main shoots and I am using LST techniques to gently bend her stems to evenly fill her space without overcrowding. ❄️TRICHOMES/RESIN PRODUCTION: Her buds are already starting to sparkle amd glisten. It looks like she will be a good resin producer! 🚿 WATER/FEED: I have continued with a light bidiurnal misting of White Dutch Clover cover crop . This in conjunction with running lower temps (New AC) has seemed to have drastically increased feeding intervals. My plants are needing much less water than in previous runs. I typically give the whole SOG one feed per week with light watering of select individual cultivars as needed between feeds. I try my best to "read" my garden. The amount of water between feeds depends on how soon the next feed will be. I feed the garden as a whole and this run I have been generally spacing feeds out 5-7 days or until the the first plant shows beginning signs of wilt (slight droop of lower fan leaves). 📝 OBSERVATION/NOTES: She doesnt appear to have any signs of deficiency or toxicity. No indications of stress, disease, or pests. Any advice, suggestions, or constructive criticisms are always welcome. Now, for the weekly break down! •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• THIS WEEK'S BREAK DOWN •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 10/29 - Day 81/Day 29 of Bloom °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° 🎥 FILMING DAY 🎥 🚿 FEED DAY 🚿 The cultivar received approximately 1 gallon of solution. I mixed 17 gallons of solution for 17 plants. The solution is applied via wand sprayer powered by a submersible pump attached to a garden hose. Nutrients and additives are added to the reservoir in the order listed below and thoroughly mixed using a large plastic stir spoon. The reservoir is oxygenated by four 4 inch air stones. 👩‍🔬NUTRIENT SOLUTION👩‍🔬 ⬇️Mixing Rundown⬇️ The solution starts with 17 gal tap H2O through two KDF filters mixed in a 36 gallon reservoir. Start pH: 7.8 Start EC: 1.1 TEMP: 74°F 2 tsp/gal - The Guano Company Budswel Liquid 2 tsp/gal - Earth Juice Hi-Brix Molasses 1 tsp/gal - Fox Farm Kelp Me Kelp You pH: 6.0 EC: 1.1 Add 2 tbsp GH pH UP pH: 6.1 3 ml/gal - Plant Revolution Orca .6 ml/gal - Mammoth P .12 tsp/gal - Plant Revolution Great White Premium Mycorrhizae®️ - with Beneficial Bacteria and Trichoderma 1 tsp/gal - Extreme Gardening Mykos WP pH: 6.4 ec: 1.2 Brewed 20 hours pH 7.0 Added 1 tsp/gal of Fox Farm Bembé pH: 6.4 EC: 1.2 •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 10/30 - Day 82/Day 30 of Bloom °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° 📸 PHOTOSHOOT 📸 • My apologies! I only got full garden pictures this week. I have little ones to celebrate Halloween with. I hope y'all enjoy! •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• SUPPLIES & EQUIPMENT CURRENTLY IN USE: •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• • A/C: Whynter ARC-14S 14,000 BTU Dual Hose Portable Air Conditioner • TENT: VIVOSUN 48"x24"x60" Mylar Hydroponic Grow Tent with Observation Window & Floor Tray • POTS: Black 8" tall Active Aqua brand 6" x 6" one gallon square pots/Black 12" tall Active Aqua brand 12" x 12" 3.4 gallon square pots • VEG/AUTOFLOWER INTAKE FAN: None (PASSIVE) VEG/AUTOFLOWER EXHAUST FAN : VIVOSUN 6 Inch 390 CFM Inline Duct Fan with Variable Speed Controller • BLOOM INTAKE FAN: VIVOSUN 6 Inch 390 CFM Inline Duct Fan with Variable Speed Controller • VEG/AUTOFLOWER EXHAUST FAN : VIVOSUN 6 Inch 390 CFM Inline Duct Fan with Variable Speed Controller • BLOOM EXHAUST FAN: AC Infinity CLOUDLINE T8, Quiet 8” Inline Duct Fan with Temperature Humidity Controller - Ventilation Exhaust Fan • VEG/AUTOFLOWER AIR MOVEMENT: 6-Inch Lasko FBA 2004W 2-Speed Clip Fan • BLOOM AIR MOVEMENT: One Honeywell TurboForce Air Circulator Fan Black, HT-900 and Three 6-Inch Lasko FBA 2004W 2-Speed Clip Fans • Bluelab PENPH pH Pen Fully Waterproof Pocket Tester • Bluelab PENCON Conductivity Pen Fully Waterproof Pocket Tester • Kolder Multi-Purpose Liquid and Dry Measuring Cup, 16-Ounce • Fox Farm Measuring Spoons • WATER TREATMENT: Tap H2O run through two AQUACREST Garden Hose Water Filters to remove chlorine and chloramine. – COMING SOON: Hydro-Logic 31023 1000-GPD Evolution RO1000 High Flow RO System, White (HL31023). • WATER APPLICATION: I use 2 different watering systems. The pump sprayer is typically used in early veg, between feeds, or for lighter feeds. Most feeds are usually run through the pump and reservoir because it's faster and easier when dealing with larger volume feeds. – 2 GALLON LAWN & GARDEN PUMP PRESURE SPRAYER. * I removed the spray head due to clogs and it's just faster. – Superior Pump 91250 Utility Pump, 1/4 HP in a heavy duty 27 gallon Tote attatched to a 10 foot garden hose to an Orbit Underground 56246 Green Thumb 9-Pattern Telescoping Wand. – Aeration of the reservoir is accomplished using a General Hydroponics HGC728040 Dual Diaphragm Air Pump 320 GPH 4 Outlet attached with standard aquarium air hose to four 4-Inch Air Stone Disc Bubble Diffusers. • VEG/AUTOFLOWER LIGHTING: 320w MosterBoard V4-PLUS powered by a MEANWELL 320H-48AB DRIVER. There are three V4-PLUS boards prewired and mounted on a 935x195x10mm black heatsink. Dimmer, UV Switch, and IR Switch included. Each board contains two hundred fifty two 3000k lm301h diodes + twelve Osram 660nm diodes plus 4 separately switchable LG UV 395nm diodes and 4 separately switchable Osram IR 730nm diodes. • BLOOM LIGHTING: Two custom mounted lighting units: Each mount has one 480w MEANWELL 480H-48B driver and one 240w MEANWELL 240H-48AB powering 6 KingBright Quantum Boards. Each board contains two hundred fifty two 3500k lm301h diodes + twelve CREE XP-E2 660nm diodes plus four separately switchable CREE XP-E2 730nm diodes and four LG UV 395nm diodes. Hanging between the two mounts are two additional quantum boards with two hundred fifty two 3000k lm301h diodes + twelve 660nm diodes plus four constant power 730nm IR diodes and four 395nm UV diodes. That's a total of 1680 watts of quantum board power in our 96" x 48" bloom tent. ⚠️ ALL DRIVERS MOUNTED REMOTELY IN AN AIR COOLED BOX INSTALLED BETWEEN THE FILTER AND EXHAUST FAN ⚠️ • SLMOTO Universal Oil Drain Pan, 2 Gallon (8 Liter) Capacity ABS Low Profile Oil Drain Pan w/Spout Fit for Motorcycles • Modified Botanicare Low Tide LT Black Tray - 4' x 4' - Modification: Cutaway at corners and used flex-seal tape to create a new edge that will be soft to fit between tent supports. She is supported by 6 Standard Cored Concrete Blocks (Common: 4-in x 8-in x 16-in; Actual: 3.625-in x 7.625-in x 15.625-in). ⚠️THIS TRAY WILL NOT FIT BETWEEN SUPPORTS IN A 48" x 48" or 48" x 96" TENT WITHOUT MAKING MODIFICATIONS TO THE TRAY!⚠️ • Blue Sticky Pads • Yellow Sticky Pads •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• SOIL MIX DETAILS: •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• All components were mixed into a 50 gallon tote that is kept in a warm environment to help innocculate to promote a vast and diverse microbial life in the rhizosphere. Once mixed, add 32-64oz water once every 7-14 days as needed. The goal is to keep the soil moisten without oversaturating. 2 Part - Royal Gold Tupur INGREDIENTS: Coco fiber, aged forest materials, perlite, and basalt 1 Part - Fox Farms Ocean Forest INGREDIENTS: Aged forest products, sphagnum peat moss, earthworm castings, bat guano, fish emulsion, and crab meal. 1 Part - Roots Organics INGREDIENTS: Perlite, Coco Fiber, Peat Moss, Composted Forest Material, Pumice, Worm Castings, Bat Guano, Soybean Meal, Alfalfa Meal, Fishbone Meal, Kelp Meal, and Greensand. Also contains beneficial mycorrhizal fungi: Funneliformis mosseae, Rhizophagus intraradices, Septoglomus desertícola .5 Part - Wiggle Worm Soil Builder Pure Earthworm Castings .5 Part - Ancient Forest Humus .5 Part - Coarse Grade Perlite Inocculated by mixing 1 cup of Extreme Gardening Mycos Watered with pH 6.5 h2O 1 Tsp/gal Real Grower's Recharge 1 tsp/gal Hi-Brix Molasses 2 tsp/gal Fox Farms Kangaroots •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Want to see more cultivars I have growing❓ Please, be sure to check out my other diaries & give me a follow! 👍👍 🙏Thank you for stopping by my garden!🙏 Peace, ☮️✌️ Love, 💚🤟 & Frosty Nugs! ❄️🌲 Happy farmin' friends! ☺️🌱 - Fo' Twenny 👩‍🌾🏻
Likes
12
Share
@Adrrys
Follow
Esta semana la GG auto 1 se le ha doblado la punta por el viento que hizo
Likes
14
Share
@Loco11
Follow
Bin sehr glücklich über das Resultat. Die Sorte ist mir richtig gut gelungen, nicht nur vom ertrag auch die Kompaktheit der Buds. Ich glaube mein nächstes Projekt wird Runtz Muffin sein. :))
Processing
Likes
47
Share
@rhodes68
Follow
10/21 Day 23 Well may be seeing some improvement on Brandy and Maggie from the drench and mag foliar spray. Will spray again tomorrow. Layla is just lovely and holding off another day on watering, temps have lowered and humidity is up so drying is slow. Just dont get it but I have decided to go full Coco coir from here on, something aint right 10/22 Fed Layla Big Bloom 3tsp - Fish Mix 1tsp - CalMag 1tsp - Recharge 0.5tsp - Fish Sh!t 0.5tsp / Gal at 6.5 ph for 0.5 gal Brandy and Maggie seem to be improving, had to train and gave another foliar spraying nothing else done. 10/24 Update New Pics - note new growth Plants beginning to drink more and Maggie showing most improvement. Afraid Brandy will stunt but sure that was going to happen a week ago. Leaf structure is improving greatly. Prob will feed in a day or two and another foliar spray at the same time 10/26 Day 28 Finally fed all three girls - nothing much has changed appearance wise and pics tomorrow on new week. Including initial dose of bloom nuets as hairs are showing strong - no foliar spray until Sunday. Feeding: Cal-Mag 5ml - Big bloom 15ml - Fish Mix 5ml - Bio-Bloom 5ml - Fish Sh!t 5ml / gal @6.45 ph for 1 gal (Layla) 0.75 gal (Maggie) 0.5 gal (Brandy) as they are drinking at different rates unfortunately. Final PH is taken after all nuets added, makes a difference. NOTE: Since this veg cycle is ending and the plants will be moving to the Flowering tent and this tent will be doing drying duty for the LSD-25 for a few days, time we were getting the Growit Coco coir ready for the Green Crack grow in a week or so. Hydrated the first brick (2 cuft hyd) and am single buffering the coco with 30 ml of cal-mag in four gallons of water for 24 hours. This will also serve as a safety wash just in case the factory lies :) Its supposed to be pretty good coco, little if any peat or croutons I can see. Will do second brick when this one finished and I can store Looking at using a different system this time around. Hope yall follow along Went ahead and posted the daily pics of the problem children just for giggles.
Likes
48
Share
This week I am still working on my slow defoliation, to get some light intake to some of the node sites, while putting the plant under as little stress as possible. I've still been using the molasses, Mykos WP and Fish Sh!t mix every other watering. I also top dressed another 1/4 teaspoon of BioAg TM-7, which once again seemed to help both plants keep their leaves held up longer between waterings. I assume the TM-7 is improving the water retention of the Build A Soil Lite I'm using. I still have the Viparspectra 100w boards, set to about 30% power kept about 14 inches away, this seems to be a good spot for the plants. I'll probably be taking the bottom branches off and cloning them this week, so I can back up these genetics. Update: I went ahead and cloned these ladies to back them up, they are my first plants from seed, so I wanna keep the genetics if I like the flower! I used clone-x, root riot cubes, my AC infinity Germination Kit with 80w led bar on setting 2. I sprayed the clones and inside of the kit with distilled water. Hoping I get some clones rooted soon!
Likes
8
Share
Hello Diary, Milky Way F1 is ready for harvest after exactly 10 weeks. 79 days since I put the seed in the ground. 75 days since Apollo F1 rose from the ground. All 10 weeks passed without any problems, Milky Way F1 as well as her roommates proved how resilient, fast and hopefully generous they are. I'm very happy with how things look so far. Finally, as seen in the photos, Milky Way F1 looks impressive, the flowers are hard packed, full of trichomes. For the last week, watering was usual, every three days. After cutting off the stem at the bottom, I put the plant upside down in the grow box to dry. Here's what the last week looked like. 02/07/2023 - Day 64. Watering. I watered the plant with about 2 liters of water. 05/07/2023 - Day 67. Watering. I repeated the procedure as I did three days earlier. 08/07/2023 - Day 70. Photography and harvesting. I put it to dry upside down and will leave it to dry for at least 2 weeks. That's it from me. I wrote everything I thought was important. If you have any questions related to this strain, feel free to write.
Likes
5
Share
@XaXaXa
Follow
Day 28 to 35 26C 65%RH 32DLI Girls going crazy, cant say much, just did some defol of old leaves, LST with topping on day 29 they got Vita Race spray started doing dipping of pots into water 2-3 times a week so they dont dry out on outside so quickly (big problem of textile pots) Will post more videos on day 34
Likes
102
Share
Hello everyone! well friends !, so she took her final forms! from today it switches to flowering mode 12/12 .. in the diary I will add a week of flowering when it starts blooming and not when the light mode has changed .. I don’t like it when they do it .. it gets confused .. 2 weeks is needed for flowering to begin active after switching to 12 hour mode .. and those growers who add weeks of flowering when switching to 12 hour mode, damn you!)))
Processing
Likes
3
Share
@420cfm
Follow
Last week was our transition week. Pistils are now appearing so let’s call this week 1! Happy with this grow so far. Lots of defoliation and lollipopping to get some airflow...
Likes
17
Share
Hello Diary. The last week of vegetation although you could already tell that flowering had begun. 😍 Purple Punch # 1 has already grown to a solid 50 cm. while Purple Punch # 2 that sprouted a few days later reached 30 cm. On Purple Punch # 1 the tops of the leaves are pale yellow, I don’t know if it’s up to light or genetics since it doesn’t happen to the other two plants that are on the Farm. 😏 This week I added a lot of nutrients when watering, I will see how they will react to that. 😐 The height of the plants now varies a lot, from 50 cm in height to 30 cm in height, so I had to adjust the height of the light in the box a bit. The lights are dimmed at 80% The temperature in the growbox is around 25 degrees, which is ideal for me but the humidity is a bit lower than I would have liked. I'm thinking of putting on a humidifier again. The plants started to be more thirsty so now watering is more frequent as well. Let’s take a look at the review of the week. 10/02/2021 - Day 15. Watering. p.H I adjusted to 6.3 with Lemon Kick and added one Easy Grow tablet to 6 liters of water. With that, I watered all three plants evenly. Temp / Humidity on the farm - 24.5 degrees and 40% humidity. 13/02/2021 - Day 18. Watering.p.H I regulated to 6.4 and did not add any other nutrients. Temp / Humidity on the farm - 24.3 degrees and 40% humidity. 16/02/2021 - Day 21. Photographing and watering. This time I added CalMg, 1.5ml / L preventively and from BoiBizz I added Bio Heaven, Bio Grow, Acti Vera and Alg-A-Mix only 2ml / L each. p.H I regulated at 6.4. Due to the low humidity, I put the humidifier back in the GrowBox. Temp / Humidity on the farm - 24 degrees and 35% humidity. That’s it for this week, thanks to everyone who stop by and take a look. See you soon. 🙏
Likes
64
Share
Hi everyone :-) This week I did extreme LST again, and I guided all the shoots to the middle :-) Now the time should be perfectly bridged until there is space in the flower chamber, there will be in about 40 days :-) . I wish everyone a good start to the new week, stay healthy and let it grow 😎🙏🏻☘️ Type: Blue gelato 41 clone from mother (Barney's Farm) ☝️ Genetics: Blueberry] Thin Mint Girl Scout Cookies x Sunset Sherbert 👍 Vega lamp: 2 x Todogrow LED Quantum board 100 W. 💡 Flower lamp: 2 x Todogrow LED Cxb 3590 COB 3500 K 220 W. 💡 ☝️ earth: Canna Terra Professional + ☝️ Fertilizer: Canna Terra Vega, Canna Terra Terra Flores, Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Flores ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 💦 💧
Likes
20
Share
@BudXs
Follow
Male plants have no place in the garden, as I have no need for reg pollen. You got fem pollen, hit me up looking at you @greenmachine. I am saddened by the sudden loss of this cultivar, but I will press on, never bitter, never looking back. I kill these plants off camera to keep it PG. Thanks for following the diary. And hey, thanks to @416fireman for starting and monitoring this contest. May not be here anymore, but I hope he checks in. Catch him on insta @416firemang
Likes
9
Share
The focus is just on the red phenos. Although the green version smoke and smell great too. It was the Reds For me.
Likes
14
Share
Feb 7th - pH 6.2, PPM 920, 1.8 EC, Temp 78f, Humidity 57% - Water Changed, 3 gals! Feb 8th - Unable to get data for this day. Feb 9th - Unable to get data for this day. Feb 10th - Unable to get data for this day. Feb 11th - Unable to get data for this day. Feb 12th - pH 6.1, PPM 900, 1.8 EC, Temp 82f, Humidity 55% - Water Changed, 3 gals! Followed aggressive week 6 feed schedule, went back on the CalMag to 6ml/gal, and upped Sweet Berry back to 8ml/gal. The bihh is heavy, making it hard to get root shots these days. :( Feb 13th - Unable to get data for this day.
Likes
3
Share
@ahaynes02
Follow
Transferred to Tight Grow Tent, Lights 25% Full Spectrum, 0% IR. Seedlings looking good since transplant, and 93% germination success rate.
Processing
Likes
89
Share
She's coming on nicely packing on the bud sights I like the structure on her removed some leaves and waste from the underside introduced sumo boost a good week should see some nice changes soon will get some better pics soon ...put up bew pics and video in better light thanks for reading happy growing guy's
Likes
13
Share
what a resin monster! such beautiful plants! one of the 2 phenos had straight peanutbutter flavor!
Likes
10
Share
@Fonzo412
Follow
This will be the start of week #2 of seedling stage. Had an issue 😢 with my blue dream plant I believe I’ve might of over watered . It looks bad hopefully it can recover. Yield may be stunted really lagging behind. Also I have another blue dream seed so I’m thinking of starting that one fresh so I can pot into the finale medium. I didn’t want to use the cup but didn’t have enough soil at the time 🤷‍♂️ The strawberry 🍓 banana 🍌 auto and the power plant fem seems to be doing good 👍 so far. All in all I’m happy 😊 with how things have been going throughout my grow . I’ll will be feeding my plants nutrients and dropping the lights 💡 for the start of Veg next week. Let’s goooo… 😎😏