******************************************** Week 11 Mid flower (week 7 flower) ******************************************** Light cycle=12/12 Light Power=140w 59% Extractor controller settings (during lights on). High temp= 26c Temp step=0c High Rh= 48% Rh step=0% Speed max=10 Speed min=3 Extractor controller settings (during lights off). High temp= 20c Temp step=0c High Rh= 53% Rh step=0% Speed max=10 Speed min=3 Smart controller settings (during lights on). Lights on=9.00am Radiator on= -19.0c Radiator off=+19.5c Smart controller settings (during lights off). Lights off=9.00pm Radiator on=-18.0c Radiator off=+18.5c VPD aim=1.0-1.5 DLI aim=40-45 EC aim=1.0-1.8 PH aim=6.0-6.5 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 NPK= 8-17-26 Method= Automatic Feed=Flower nutes Neutralise=0.1ml/L Plagron bloom=4ml/L Plagron Power buds=1ml/L Green Sensation=1ml/L Easy Ph down=0ml/L (1ml=24 drops, 1 drop=0.04ml) Easy Ph Up=0.021ml/L (1ml=24 drops, each drop is 0.04ml) Ec=1.55 PH=6.2/6.0 Runs=8 Run times=3mins (0.75L/0.375L each) Gap times= 17mins Total runtime=24mins(6.0L/3.0L each) Total flowrate= 0.25L/min(0.125L/min each) Auto start time=10.00am Auto stop time=12.23pm 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 ******************************************** ******************************************** 📅19/4/25 Saturday(Day 71) 💧 Manual Flower nutes Ec=1.5 PH=6.3/6.0 Volume=7L Volume left=1L Volume used=6.0L Volume each=3.L Runoff. Total runoff=0.7L Ec=3.4 PH=6.5/6.3 💧 📅20/4/25 Sunday(Day 72) 📋H=91cm D=19cm Dli=43.8 PPFD=1010 📅21/4/25 Monday(Day 73) 📋 📅22/4/25 Tuesday(Day 74) 📋 💧 Automatic water Ec=0.14 PH=6.9/6.4 Volume=8.0L Volume left=2L Volume used=6L Volume each=3L Runoff. Total runoff=0L Manually 1L each Volume each=4L Total runoff=0.7L Ec=2.6 PH=6.5/6.3 💧 📅23/4/25 Wednesday(Day 75) 📋 📅24/4/25 Thursday(Day 76) 📋H=91cm D=19cm Dli=47.0 PPFD=1090 Lowered light power to 130w H=91cm D=19cm Dli=44.0 PPFD=1020 📅25/4/25 Friday(Day 77) 📋H=91cm D=19cm Dli=44.0 PPFD=1020 ******************************************** Weekly roundup. 📋 What can I say, this is producing some chunky flowers, stunning plant, has suffered a little on the main cola through the light being close, but I'll be reducing light intensity from this point. Back soon. Take it easy. ********************************************

Always seemed like it needed cal/mag because of the neon green color. I did give it to them but didn’t make a difference.

Smoothies are drying out --> HARVEST coming soon. Now there is only the last amnesia haze left.

This week ia am planning to let it grow just like this. Hopefully I will receive a plant camera next week to monitor my VPD. Also added an IRheater to keep temperature stable The infrared heater does its job, but I find it a waste of electricity, 3.6 kWh in one night. So I've decided to install a gas heater instead, which delivers the same result at a much lower cost and also provides additional CO2. The heater can then keep the temperature above 21˚C with the lights off. The natural gas heater will be used with the lights on. I need to quickly find a CO2 sensor because too much CO2 has a counterproductive effect, as I've already noticed. Approximately 1200 PPM at 32˚C is optimal as long as I can maintain a DLI of 35. Great technology is on the way. Added: Installed CO2 burner, run it for 6 minutes every hour. Temp raises from 22˚C to 27˚C in about 7 minutes. CO2 detector (just colors, no values) doesn't alarm so not above 1500PPM CO monitor also no alarm :) Running for 4 hours now and a visible change is there. Tomorrow I will know if it is ok or not. Added a few pictures. Lets see if we can see the difference tomorrow. 26-05: Added Dimlux Maxi controller for CO2 and VPD. Works nice. 28-05: Topped a few 31-05 Added additional 300W to heat the stuff up. RH is stable but high on 72%. Could add a dehumidifier but since CO2 is already there and my VPD is around 0.8 I thought adding light would be cheaper. Can go up to 33˚C before my floor is heating up too much. Also cleaned the watertank. So from now on they are on Ata Max

Very sprite-smell and heavy flowers

This was the last week of veg for these girls. Flipped the light to 12/12 on day 33 and added a pinch of maxibloom to the reservoir. Will be upping the maxibloom as I lower the maxigro a little over the next couple weeks until the stretch is over. Then will start adding some flower boosters to try to build some fat sticky buds. Couldn't ask for a smoother veg as far as nutrient maintenance goes. The plants have required defoliation pretty much daily and their growth rate has been great so having to readjust their tie downs every couple days. Will continue to spread the branches out a little as they make their stretch. Most of the girls are pretty uniform other than there is a sugar cane that is turning into a monster. Pretty sure she is going to put on a huge stretch. And one of the slurricane is a bit of a runt compared to the rest but I like that there is some difference because it means I have a better chance of getting to sample more phenotypes. I have started a breeding project diary on the strawberry eclair already, but keeping my eye out for a couple more candidates to clone. Going to wait until they show them trichomes before deciding though. Should start to pop some pistils and stack some calyxes in about 2 weeks.

Heute am 20 BT habe ich die Pflanze beschnitten und ein wenig gelollipopped. Eigentlich hätte ich noch mehr Blätter entfernen können aber sie hat schon so genug Stress bekommen.

I CHOPPED ABOUT 15 AUTOFLOWERS AND MOVED SOME OF THE PHOTOPERIODS FROM THE 5X5 TENT INTO THE 8X8 TENT. ONCE ALL THE AUTOFLOWERS ARE CHOPPED I WILL MOVE ALL THE PHOTOPERIODS INTO THE 8X8 AND THEN I WILL SWITCH THE LIGHTS TO 12/12👍🤘🤘🤘 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

💩Holy Crap Growmies , we are outdoors and in the Ground and there Doing Great💩 👉It's been another full week 35 days from seed and she's doing great , very nice Growth, considering shes been up against the wind and rain 👈 No problems 😊 so far so good 👍And she's now in full on flowering 😁👈 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 👉NutriNPK NUTRIENTS USED FOR FEEDING 👈rain water to be used entire growth👈 👉www.nutrinpk.com right now get 10% off using SPRING2022 as the coupon code👈

Hallo zusammen 🤙. So das war es für sie wir sehen uns in 2 Wochen wieder.

Starting to snow in my tent! 🌨️❄️

The strain has proven to be extremely sturdy compared to the autoflower version. The smell has been a bit problematic. Some terpenes just can't seem to be tamed even with a brand new carbon air filter. I hope this pays off in terms of aroma quality :)

This is more Indica dominate, small bushy plant with lots of lower growth I did not lollypop this as well as I should have. The buds are surprisingly dense and a light mint green in color. I will try this again as I feel the strain has a high potential for rosin production. solid THC levels for an auto.

7/14 4AM MONDAY MUST DEFOLIATE!!!!! I HAVE 4 INSTEAD OF 2...BECAUSE OF MY LITTLE ACCIDENT EARLY ON.. I WILL TAKE ONE OUT OF FLOWER AND RE-VEG TODAY!!! 7/15 420am They are great cutting I took last month or week is great. Amino and mb today!!

Day 29. I adjust the LST to form the canopy. pH at 5.8 Day 30. It's not necessary to adjust anything, just a little the main stem. pH at 5.7. Growing well :D Day 32. I change the water in the tank, I go from the vegetative table to the flowering stage, keeping the same Ec pH to 5.9. I make some small adjustments to the LST and remove a few fan leaves. Day 35. Growth is pretty good. The pH drops about 0.5 by day, the plant drinks about 1 liter a day, (I think this is due to the decrease in pH). First defoliation. In general, the week has been good. Now I have to deal with the daily pH drops I think caused by the water intake of the plant. Possibly one more week of stretching remains, Auto Mandarina is 70% sativa 30% indica, so an Indica dominance would be better for my set up.

I cut the LST cause was too much constrictive for the plant I use to watering 1 time every 4 days , 2L

Moinsen wie man sieht geht es den Damen recht gut, sie fangen an Farbe zu bekennen. am anfang der woche gab es für alle 2,5L wasser+1L wasser mit 10ml/ Pk5-8 und eine leichte entblätterung damit die Luft besser zirkulieren kann da der mittlere Bereich des ScroG Netzes ziemlich dicht aneinander steht ansonsten war nicht viel los diese Woche. Ich denke mal das die Damen noch ca 3 Wochen brauchen werden bis sie ansatzweise fertig sind. Auf den Bildern ist es zwar nicht so gut zu erkennen aber die Damen werden lila schwarz an den blättern und die Knospen bleiben giftig grün nur die Dame vorne links hat nur kleine Flecken die sich lila zeigen aber ich denke mal das wird in der nächsten woche auch noch zu legen so lange die Temperaturen mit spielen! euch noch ne schöne woche ihr growmies