Total de Dias 15 - 17/08/2021 / Inicio da 3º semana Total de Dias 16 - 18/08/2021 Total de Dias 17 - 19/08/2021 / Rega Total de Dias 18 - 20/08/2021 Total de Dias 19 - 21/08/2021 / Rega com 2ml de calmag apenas por prevenção Total de Dias 20 - 22/08/2021 Total de Dias 21 - 23/08/2021 / Rega

In dieser Woche hat die Pflanze das komplette Zelt ordentlich ausgefüllt und hat sich auch ganz gut gestreckt. Am Ende der Woche habe ich ihr ein bischen die Beine rasiert um eine bessere Luftzirkulation zu gewährleisten. Einen schluck Bio PK 5-8 hat sie an dem Tag auch noch bekommen.

Well started flush on out door cheese well greenhouse indoor only just preflowering off site so less pics like the gorilla frisan duck so yeah more pics this week peace ended up chopping cheese 2 as bud rot struck so got rid and got 11.3 grams wet from 1 so quite low yield mould resistances not the best not the most crystals I have seen nor the least it's a 2 out of 10 so far yeah staying at 2 as was fun to grow but yeil was disgraceful 1.6 g dried she had the cheese smell and taste but little vegy so going to cure the remainder try in 2 weeks utterly as for the rest can't wait frisan duck has like 70+branches so she's going to be a nice harvest no pre flower yet peace

Fattys are growing and seem to be thirstier.Used foliar spray to help the leaves and also started tucking. When the plant was topped pistils were seen for first time.

Day 51, 4th of November 2020: The 3rd day since the lamp switched to be 12/12. I raised up the nutrition intake as it can be seen above only the BioBizz family 2ml/l and removed some LST because the plants remain in shape or just set a bit but nothing significant.... They look good and strech is on the way..... Nothing really to report there is crazy 2-3 weeks from now ;)

The flowers have started to swell and increase in size nicely. She's not stretching much, so I guess, these 18cm will be it. She's getting a really shimmery purple colour. I tried capturing it in a video. I removed some of the older leaves to optimize for light and optimized fertilizer for bud size (Hi PLAGRON Alga Bloom!). Give us all your CBD goodness, purple lady!

Gonna keep an eye out for crosses with face off OG! Good outcome for 1st grow👽 BHO made made with whip it premium after about 3 days in freezer with column.

bubble gum clones, observing those yellow dots.

Most of my flowing plants are cut and hung, cpl taking their times getting nice and ripened just a few more days then everything comes down Making room for my autos

The buds are fattening and getting covered with trichomes very well, most of them are healthy and flowering at the same stage, orange pistols are already popping out, thinking about harvesting in a week or some.

really easy to grow. Had some issues in the begging being underfed and low ph issues. But still grew through all the struggles. Wasnt the biggest yield but wasn't the biggest plant. So wasn't expecting truly much. The purple pheno gave me a zip and half about. The other green one gave me a zip dry. Both smell lovely and can't wait. Will come back next week or so to update smoke report. Also fixing to make cannabutter from some of this can not wait ^_^ . Will grow it again but in a bigger pot maybe.

ALL THE PHOTOPERIODS ARE IN THE 8X8 NOW. DID SOME MAJOR DEFOLIATION BECAUSE THEY ARE TOO BIG NOW. THEY ARE SWITCHED TO FLOWER AND THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

This week a lot is happening with Tamara 👸. Our little princess is entering bloom 🌸 with everything she’s got. Formation of her first flowering traits, the beginning of the stretch. So, it’s time to do a little more than just feeding her every 2–3 days with a light nutrient solution. A scrog net is being set up in the box, and since Tamara‘s stretch really kicks off compared to her growth in the past weeks, she’s also getting some LST. Some would say you shouldn’t do that at this stage 😅😉… well, I do. And what can I say, it doesn’t look like she’s having any trouble with it 😂🤗. By the end of this week she’s even already reaching up to the net … so now it’s time to guide all the other shoots as well … “little” Tamara …

Week 9 in the books and still waiting on ripening. The hardest part about this project is having to do the testing in such small batches due to my space restrictions. Still no issues with the grow and we’re getting some great pheno variation amongst them all. The consistent quality of them all is the slight pink hue in the buds which is characteristic of the Skywalker parent. The scent is unmistakably sweet like the strawberry parent. All told - we’ve got a good hybrid here that still needs refinement before we try to breed out S1s. P1 - still staying green, resilient, lower yield but best genetic specimen of the lot. P2 - winner pheno but needs to be grown out under perfect hydro conditions to be sure we didn’t have any deficiencies baked into the strain genetics. Best combo of the 2 parents and some awesome deep purpling of the fans. P4 - another winner pheno with prominent strawberry characteristics and heavy yield. A little bit of the purple has bled through to this pheno and it remains a more resilient specimen than P2. Again, worth testing in a better hydro medium like dwc or dutchies. Well chop and freeze the whole lot for bubble and pressing once the run is complete and trichs have fully matured.

Wow guys, look at all this sugar leaking out of these buds! I'm going to end up doing like Winnie the Pooh when I put my hand in the jar! I already know it!😅😅😅😅

10-5-25 last week for the dos si dos 33 she is looking heavy and ripe going to pull her in the next couple of days. The rest of the girls still have a a week or two left.next week we will have a harvest.

Had some humidity issues been watering with spring water until I get something to filter the tap water Jan.8th amnesia haze 1 got bit taller so I did some more LST

Esta semana toca trasplantar, ya que el sustrato ha sido colonizado. Utilizamos Macetas textiles de 4L para mejorar el drenaje, esta vez solo añadimos Bio Terra Plus, nada de perlita. Nada más finalizar los trasplantes, regamos abundantemente solo con agua y en el siguiente riego continuamos con la mezcla de fertilizantes. La potencia de los LazerLite Pro 720 sigue al mínimo, aunque ya son cuatro conectados (uno por variedad = 1 m2).

Day 15 - Gave the girls 500ml of plain RO at 6.3(ish) PH. Watered in a ring around 'em to encourage the roots to spread out. Day 16 - Didn't do anything today just monitoring grow environment Temp, RH, Leaf Temp, VPD etc. Day 17 - Waterred 'em down again, 500ml plain RO at ~ 5.9 PH. Days 18 &19 - Nothing done, just monitoring the grow environment Temp, RH, Leaf Temp, VPD, etc. Day 20 - Waterred 'em down with around 700ml plain RO at ~ 6.1 PH. Day 21 - Didn't do anything today just monitoring grow environment Temp, RH, Leaf Temp, VPD etc. Notes: I'm starting an Arduino project that automatically waters the plants based on the soil moisture and will calculate weekly water consumption. I already have one setup that does all of that and has a water level indicator that alerts me when the water level is low. Automatic Watering Kit: https://www.adafruit.com/product/4746 Soil Moisture Kit: https://www.adafruit.com/product/4241