Harvest a quarter pound out of 3 Autoflower plants

Eternity Grow Cup 2025 – Plagron & Zamnesia Runtz by Zamnesia Seeds – 51 days from seed and 22 days into flowering. 🌱 Our girl is growing beautifully! One of the colas shot up around 20 cm taller than the rest, so we had to bend it down. Thanks to LST and careful pruning of branches and leaves, she’s taken on a really interesting shape. We’re planning another round of leaf defoliation soon to give her even more space to thrive. 🌿 She’s loving the Plagron nutrients, and it really shows – she looks absolutely fantastic! 🙌💚

Once again, this week starts where the former one ended. With the exception of all the cables you can see in the first picture. I dared to install a minimalized version of the Raspi control only controlling the self-built humidifier and one blower/fan combination. I was very pleased to see how easily the simple diffusor can hold optimum VPD as long as temperatures are high and humidity tends to fall below optimum VPD. A single 10 seconds evaporation can hold the level for about 2–3 minutes. I am not pleased to see the Monsanto blowers rather underperform. It’s impossible to reduce humidity or temperature with both running on full speed, while a lifting of the tent door will bring immediate changes. With the Raspi/Arduino success so far*, I am thinking about using old Power Mac fans which are WCM controllable and use 12 V. At least one to increase air intake, and maybe even the blowers. * It wasn’t any problem at all to have the Arduino collect CO2 and soil moisture data, so after some more cable manufacturing (aka helpless soldering), I could extend the Raspi control. I’m still uncertain about the camera module (@trelorny impressed me with his time lapse videos). I don’t want to put the hardware into the tent with its not so electronics friendly climate, already risking some rare outages of the temp/hum sensor. But the camera module cannot be placed far away. So maybe I’ll use the 3A model I own as a spare part as a camera driver. Any maybe, if it works, invest in a better camera module. Mine is generation 1. Oh, and the ladies! Gave them slightly fertilised water yesterday, and even it or the better VPD yesterday or a combination of both make me believe bud growth is a bit more visible today. The smell in the morning when I open the tent to release accumulated humidity is outstanding. They were already thirsty on day 57 again, so pure RO + a bit of tap water until it spilled out of their pot’s bottoms. Many fan leaves turning autumnally now, and the smallest Sherbet suffered a bit from over-fertilisation as I wrote. But it this stage I don’t go for leaf beauty anymore. Just another learning: Don’t use differently sized pots anymore. Hard to feed them individually this way. VPD was mostly in best range yesterday, and I have the feeling it really supports their bud growth. I added an "Evening time" option to my Raspi control that allows the humidity to sink a selected time before lights shut down. That made it possible to have humidity in best range for most of the night time too. They were even dry again on day 58 morning. Another time just water. The blowers cannot cope with the flowers’ smell anymore, and so sometimes my flat cannot hide who shares it with me. Day 60 presents me with a problem: I’ll leave on Friday for a few days. Considering the microscope pictures are not from the tops buds: Would you say it’s safe to give them another week? Problem solved on day 61. Only clean water from now on, and next week will be their last. You won’t see any new pictures for some days now. Me too … Something I wanted to share with you before I leave: I just finished to update my grow box control with a new PWM fan hat that keeps the Raspi cool, while at the same an infrared sensor can now measure real leaf and additional ambient temperature. Setup is much cleaner and more robust now, but I wish my flux would not make the solder stick to the tip of the machine instead of making it flow and stick at the tiny tiny spots I have to hit …

Hello again, Growmies, As we proudly step into week 10 with our Epic Buzz, the symbiosis of nature and technology in our garden is truly flourishing. The dedication of TrolMaster's automation system is reflected in the thriving state of Epic Buzz #1, #2, and #3, which are burgeoning with vitality and promise. Epic Buzz #1 is a spectacle, adorned with clusters of dense flowers that are bursting with trichomes—each bud a sparkling testament to the perfect environment we've provided. The light frosting is spreading across the foliage, foretelling the potent harvest that awaits us. In our controlled ecosystem, the average Vapor Pressure Deficit (VPD) has been right on target, ensuring optimal transpiration without stressing our beloved plants. This careful balance optimizes their uptake of water and nutrients, fostering the luscious flowering we're observing. Siblings #2 and #3 are not to be outdone, with their own dense, sticky flowers reaching for the heavens, eagerly soaking in every ounce of light. Their robust health and vigour are clear indicators of the success of our environmental stewardship. Our environmental graph this week is a testament to our commitment to stability. The temperatures and humidity have held within the ideal range, if we discount the outliers, maintaining a conducive atmosphere for the Epic Buzz family's development. The steadfast nature of the EC and pH of our nutrient solution has played a pivotal role in this week's triumph. This unwavering supply of nutrition has been crucial, providing our Epic Buzz plants with the sustenance they need to thrive. As we look to the coming weeks, it's with a sense of eager anticipation. The Epic Buzz trio, with their hedgehog-like buds and early frost, are not just plants but representations of cultivation mastery. They are a living tribute to the precision of our environment, lovingly controlled and monitored for their benefit. And so, as we anticipate the final stretch of this grow cycle, we remain captivated by the daily progress and the nearing harvest. With each day, we're reminded of the beauty and strength found in diversity and balance. Stay lifted, Salokin

Es läuft alles prima und ich bin sehr zufrieden

Like I touched on previously, I am only going to be using ILGM for One or two strains in the future. I’ve had a run of Hermies and or bananas from so many of their seeds lately it’s just not acceptable at this point. I really truly believe they have some solid genetics in some cases, but maybe they’re rushing on some of the newer strains they’re putting out. I don’t know but I’m moving towards using different banks at this point. Aside from the issue during the grow I also noticed the last round of seeds I got from them maybe 30-40% were visibly immature. No striping, which I know is normal and some strains but the real obvious sign was they were not dark enough like they were super light green almost approaching a white color. I’ll use them for pure indica which is a power house, gold leaf and maybe blue dream. Then again I’ve got a tent full of those clones anyhow 😉

Stardog room it is looking pretty good and is thriving. Hopefully get the results we asking for. Aya room up to now is giving pretty impressive results and it looks like they like the enviroment even tho its not fully equiped. After adding the c4 neet to celan the insides a little bit more and see how it will react.

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Hi everyone :-) . It develops really strong and beautiful from week to week :-). In the next 5-10 days I will put them in the flower chamber :-). Until then, I will train you with topping for the last time today 👍. Otherwise the tent was cleaned and everything checked 👍. Have fun and stay healthy 🙏🏻 You can buy this Strain and Nutrients at : https://greenhouseseeds.nl/ ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Green House Seeds Company Cup Clone 🏆 Type: Wonder Pie ☝️🏼 Genetics: Wedding Cake x OG Kush 👍😍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Flower Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Earth: Canna Coco ☝️🏼 Fertilizer: Bio Grow Feeding ( GHSC ) , Enhancer ( GHSC ) , Bio Bloom ( GHSC) ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8

These cultivars from Sensible Seeds Premium Selection have good leaf to bud ratio, they grow fast and bud production is spot on, oils and terps are really good, Give them a go Growmies, youll be surprised, im not getting anything from Sensible Seeds for this im just saying very good genetics and their not! expensive. Im gonna try Blue Zushi from @Original Sensible Seeds next as they have posted them to me so any day soon i will start these girls 🙏 ive bin waiting for Blue Zushi a long time, so im gonna give it 💯 attention and show her beauty👍🏻📸

They grew a lot this week or so it seems to me, because i was on vacation and havent seen them the last 5 days. SQ#1 and Blue cheese are now my biggest plants Even though i germinated 1 week later and also from the other strain there was one plant that was always bigger than the Rest and now its the second smallest. So far everything was nice, no issues with nutrients, desease or bugs, every plant develops hairs and is female. I think i give them 1 more week to grow and then i‘m changing the light cycle and start the flowering Phase, really excited for that :)

I’m growing critical purple this is my second grow. I need help with how to use my liquid nutrients it’s been 61 days I just been watering with a p.h. Of 6.3. I’m hesitant to use it because I don’t know how much to use please help I’m using fox farm liquid nutrients grow big big bloom and tiger bloom.

There's another week, last major cut, Gorilla No. 1 was male or hermaphrodite so it was removed, Gorilla No. 2 looks like a female for now, maybe it will stay like this 🙏 Day 40: Because one wheels grew 20 cm above the others I had to do HST, I can do topping, but I didn't want to lose buds, so I chose HST Day 41: the next day, the HST branch turns behind the light day 42: The last day of the sixth week, the girl is in great condition

Flower starting to swell

WEEK 10: HARVEST! https://www.royalqueenseeds.com/blog-how-to-grow-autoflowering-cannabis-n83 #64 - #70 17.5.-23.5. #64 17.5. Harvested Purplematic#1 and #2 Harvested most of Stresskiller, left few lower sites Threw em up in the tent, laying on the scrog net (up)there for now. #65 18.5. -Nothing done #66 19.5. -Harvested rest of stresskiller. -Will give fasteddy until tomorrow, and for solomatic possibly until end of week fri-sun. #67 20.5. -Cut FastEddy and put up to dry out, also took out her pot from the tent, now only solomatic left. #68 21.5. -Nothing done #69 22.5. -Now also Solomatic gets to go -Will start cleaning and prepairing the tent for next batch, which can be found here: https://growdiaries.com/diaries/107451-grow-journal-by-domone (RQS Spring Cup 2021 - Watermelon) Also will install my new Autopot system and start thinking 'bout a possible LED setup ADDED FULL TIMELAPSE VIDEOS, from both cameras, to week FLO10 "fullTIMELAPSE1 #1-#64 From bottom" "fullTIMELAPSE2 #1-#70 From above"

COMMENTED BY MadeInGermany MadeInGermany 3 hours ago Flowering day 7 since time change to 12/12 h. Hey guys :-) The flowering started last week because otherwise the space in the small tent would end up being too narrow :-) Cuttings were taken from each phenotype beforehand. To change the flower, I rinsed it very lightly with clean fruits. With the next watering she gets a mix of grow liquid and bloom liquid before she only gets bloom. The heating mat works perfectly in the small tent and the parameters are all in the optimal range 🙏🏻👍. Now we hope that everything stays that way and that the cold days will slowly pass :-) . Everything was cleaned and checked. have fun and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Strain at https://pcg.international/shop/pcg-int/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

hey guys so the time has finally come cut both these girls tonight after 3 days total dark - smell is just amazing and buds rere so dense 😀 i have 5 full line of main cola and 1 rack on dry net of top cola had remove as no branch support and i also have 3 racks of lower case buds for hash or roisin . Overall though i could not be happier 😀 and i defo think i will be very close to my 1 kg target under a 600watt HPS bulb 😀 and finally getting above my best of 1.2g pw😀anyway til next week guys and my dry weight 😉

Week 2 begins for Green Crack and LSD. Both ladies are looking happy and I increased their feed by 1 liter each. Thanks for stopping by growfessors 👽 tune in next week for another episode of growfessor theatre.

Yeesh, what a ball drop Circuit Breaker kept tripping. Using 3 450w, co2, exhaust fan, 3 fans. I unplugged the Co2 after 3 days of troubleshooting. Vpd got totally screwed, plants didnt get watered and messed up the steer. Irrigation system clogged(probably from stagnating) Reservoir has buildup of organic material. Think it was caused from Kelp, and microbes being added to the tank A bubbler didn’t help, covering it didn’t help. I did not try “hydrogaurd” I will stop adding organic nutes. I am now watering by dubbing a bucket into the tank and gand waterin Also, no more than 1000w of lighting in a room. I prefer to use a full quality setup with less plants. No Co2 is ridiculous. Each test ive done has shown that co2 gets me heavier yields.

Eccoci di nuovo qui!!! Super eccitato per questa nuova collab con Exotic Seed, team davvero al top, che mi ha dato l’opportunità di testare questa nuova genetica e di condividere i progressi con tutti voi!!! Come sempre partiamo nei bicchieri per poi travasare.. Questa volta verrà svolto tutto sotto la Lumatek Zeus 465 ProC, mi aspetto molto da questo ciclo!! Settimana incredibile!!! Grazie a tutti per il supporto ❤️🍀🔥