Likes
9
Share
I'll be using the 5x5 for my photoperiods Everything is starting to pop out of the soil now. Waiting on 2 more to pop out and that will be all of them🤞👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 CHECK OUT MY OTHER DIARIES TO SEE WHAT BREEDERS AND STRAINS I AM GROWING👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
16
Share
Auto run finished. Flipping photo's to 12/12 next week! Going to install trellis netting, attaching it to the HV kit framing. Going to throw a 3rd LEC 315 CMH in the tent with plans to replace with a HLG 650R LED.
Likes
33
Share
@Damonkey
Follow
It’s awesome it likes to be away from the light the one that was off to the side far out performed the one that was directly beneath. Both are nice though and have the same smell, taste and bud structure. After proper drying and curing it honestly can’t be beaten. Fantastic aroma and flavour and a really good strong stone. Calming, relaxing and meditative.😍😍😍😍😍😍
Likes
34
Share
@Hexus
Follow
Day 22 - She's doing okay! Had a minor PH issue the other day due to a cheap meter, which has been replaced. Her bottom first fan leaves are a tiny bit brown as a result. Her roots are clean and nice looking, thanks to the Hydroguard. She seems to be doing all around very well. Definitely have to check and adjust PH daily to keep her under control, however. Day 26 - So I moved her to a new, non-visible home. Not because of any failure of the visible setup, but because at one gallon, it was just plain too small. She was going through water so quickly that I was having to redo her whole tank every two days. Was becoming too much maintenance. If I can put together a three gallon clear setup I will move her over to it. That is the plan at least. If not, she'll be a bucket girl. She's doing well and thriving, so everything is cool on that front.
Likes
98
Share
The growing cycle itself worked out as expected, except that the pH-level was way off from where it should be, and I found out a bit too late. Because of this the outcome of the harvest didn't say much about the potential of this strain, but as soon as I got enough time and space, she will get a new chance to shine.000
Likes
5
Share
@GrowDr
Follow
I Pruned all the lower herming sections and lowered the far red % as well. Lots of trichomes, which is always awesome. Smell is amazing
Likes
40
Share
@MrJones
Follow
47th Parallel Crowly's Comet 🔹⊱╮🔹╰⊰🔹 GROW Started 03.10.24 INFORMATION 🔹╰⊰´🔹⊱╮🔹 🌞Environment - Maintaining 80F and 65%Humidity 🌾Training - Nothing this week, just letting the seedlings veg out. ⚱️3-Gallon 📊6.2 PH 💧 Feeding - Using Horti Grow 8-11-21, Bloom 5-15-26, Late Bloom 0-24-26, Cal 12-0-0 🌞Medic Grow Smart 8 760 Watts 🕷️ IPM - CannControl from Mammoth and Mosquito Bits as needed 🔹⊱╮🔹╰⊰🔹 PLANT UPDATES 🔹╰⊰´🔹⊱╮🔹 📝 Notes - These girls are killing it; they are ready to push into flower! 📝Fertigation injects fertilizers into an irrigation system to supply dissolved nutrients to crops. 🗓️04.20.24 Today I flipped the ladies into flower, Ihave let them veg out as much as I feel the grow space can hendel, I am sure there will be a bit of pruning and duper cropping in the near future, these girls will grow un touched other then the 2x daily fertigation but switching out the Horti-Grow with the Horti-Bloom, feeding at Hort-Bloom @ 2.7 GRMS Per Gal and Horti-Cal @ 2.5 GRMS Per Gal. 🗓️04.21.24 Today fed with Hort-Bloom @ 2.7 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal. 🗓️04.22.24 Today fed with Hort-Bloom @ 2.7 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal. 🗓️04.23.24 Today fed with Hort-Bloom @ 2.7 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal. 🗓️04.24.24 Today fed with Hort-Bloom @ 2.7 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal. 🗓️04.25.24 Today fed with Hort-Bloom @ 2.7 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal. 🗓️04.26.24Today fed with Hort-Bloom @ 2.7 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal. ╰⊰🔹╰⊰´🔹⊱╮🔹╰⊰🔹╰⊰🔹STRAIN INFORMATION🔹⊱╮🔹╰⊰🔹╰⊰🔹╰⊰🔹⊱╮ Crowley's Comet / https://www.47thgenetics.com/product-page/crowley-s-comet-10-fem-birdseeds It's everyone's favorite piece of space rock, Crowley's Comet! The culmination of reversing our Matterhorn cut off Mr. Crowley to Intergalactic Runtz, and the results were out of this world (I had to do it). These ladies were slow to start, but once they hit their stride, they put any worries we had to rest. Compact, short-framed, and robust. They pack beautifully boulder-like flowers that reek of garlic and sickly sweet cotton candy. Dark green to a mosaic of purples, yellows, and silvers. Frost production is off the charts, the internode spacing is tight, and they certainly will impress in their last few weeks of flower. This is one of our favorite crosses in the new fem lineup. If you're looking for your hype fix, here you go. Yield: Heavy to XL Flower Time: 63 days Feeding Schedule: Heavy
Likes
21
Share
@Bud_Lee
Follow
Full feed el caudillo organic. Esperando a que seque el substrato para cosechar✂️✂️🤪🙏
Likes
10
Share
Likes
16
Share
**Update** 96.5 grams dry from 1 Autoflower! Amazing smells, still has some of the 🍈 funk. She needs to cure to let the Terps and Flavors come out. She is still very sticky and resinous. Will update once a week or two of cure is done, but with the 1 joint I smoked, full heavy hitter, body buzz and heavy head high. Looking forward to the finished product. This plant flourished with little work on my part. Good nutrients, and not being too hands on let this beast do her own thing. I would definitely recommend as a beginner strain/auto flower to go with, she is easy to see through to the end. Didn’t really need much attention until flower came on and she fed hard for phosphorus and potassium while she stacked. I’ve got some of her cousins already sprouted and am looking forward to trying some different techniques to see what she can do! Happy growing all 🌱😎
Likes
10
Share
Likes
11
Share
Crystal is amazing smell is unbelivable such a awsome strain
Likes
2
Share
@Bluemels
Follow
Tag 44: getoppt an 4 Zweigen. Tag 47: Ich gebe Alg a mic zur Hitzestress Behandlung ins gießwasser, die Pflanze ist an machen Stellen schon recht hell geworden, aber draußen wird es auch bald Kühler.
Likes
7
Share
@Cannerd
Follow
Week 6 Vegetation - "Sam" rate of growth started to increase near the beginning of the week. With the nodes now stretching, I've started to implement tucking of the larger fan leaves under new and smaller shoots. I find this "new growth priority" method paired with LST really maximizes and speeds up the growth in comparison to an untrained plant. Merely anecdotal though! You'll notice that in the 3rd shot, the nodes stretched out in about 2 days and just ballooned! now that's what I'm talking about! nearing the middle of the week and the rate of growth is fast enough that I can't remember to take enough pictures between the new nodes. At this point I'm tucking new leaves almost daily, making paths for the light to reach new growth tips. By the end of the week, I'll need to start tying the nodes to the side before they stretch too far up. If they stretch too far before tying them, they can be a PITA to tie down later with dense foliage and such. Tying them down before they get to this point also keeps the nutrients moving to the "new side-nodes" from these branches. Eventually these will be just as thick as the original main stalk. UPDATE: As you can see with the last photos added, the branches are almost even with the original top of the plant that was tied down. I gave them a thorough fertigation the night before, and only slight folding of the leaves so I must have choked the roots a bit, but nothing long term.
Likes
Comments
Share
Sie entwickelt sich gut, vermutlich wird man Ende der Woche die ersten Pistils sehen. Sie hat eine stattliche Größe erreicht, wenn der strech dazu kommt vermute ich eine Höhe von ca. 60cm
Likes
Comments
Share
Week six of White Widow. She is probably about ready to flip to flower now. I am going to hold off another week or two until I have everything in order. I did some defoliation and cut some lower branches to root clones. This thing is bushy as fuuuuu! I am doing some LST on lower branches and will SCROG as best I can when I flip to flower. She is happy and healthy right now. No issues. Humidity in the tent has been a bit high so I may have to get a dehumidifier in the tent soon.
Likes
9
Share
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Umstände.
Likes
8
Share
@Farmer1
Follow
Very good smell mix of gaz and exotic fruits,the buds are Soo compact!hope the weather will not be too humid 🙏
Likes
46
Share
Buds starting to get really fat and frosty. One of the blueberries have a distinct smell of sweet berries. Too bad its an auto or i would have monster cropped it (clone). Looks like i will get a descent and potent yield.