Recommended
Likes
Comments
Share
@Ts1Ko
Follow
She began to flowering actively. No signs of any kind of disbalance. Everything is ok. Just a little bit of more light would be perfect for her 🤷‍♂️ Can't help with anything. Because of her height she is blocked by others 🤦‍♂️
Likes
178
Share
Probably the smoothest week since the start, I think that this pheno is a light feeder compared to Strawberry Lemonade in DWC, still running EC at 0.9 max and they’re doing fine, will be increasing the EC in a few days time to around 1.2, last thing I want is lockout during the stretch! Roots are pretty darn big, the bottom right plant is growing well again now although she has probably lost a week or two on the rest of the pack, I’ll try to train plants close to her away so she can get a decent share of light. Flipping them to 12/12 today so the long march to harvest starts now. Dates on the time lapse are unfortunately the dates I uploaded to the app, not necessarily when the pic was taken, but it gives a good enough steer on progress and how long it has taken. Take care all!
Likes
29
Share
@Elpicor
Follow
D 75 02/04 just water this week, I'm very happy with this run!
Likes
27
Share
Start of week 5 for Kalini Asia Shes really got a perform note to her scent! And has a clear purple coming in too while new pistils are completely white. Ive been able to bend her colas a bit outwards everyday to try get better light penetration to the buds and i think its working well. What do you guys think? Still bottom feeding her everyday just water.
Likes
4
Share
Likes
10
Share
Growth is starting to explode On week 3 of my feeding program from green planet Startin to get thick
Likes
24
Share
The girls have survived another week ❤️ I did a light defoliation and have been monitoring the RH closely. We have had a very damp week here, and the RH kept climbing and had my fan working hard. They are starting to plump up and fill in 😋. They have also started to slow their drinking habits, instead of watering every three days, it has moved to every 4 now. Just a couple of weeks left, I think I will be harvesting these over Christmas 🎄, and will have some great bud ready for the new year! 🎉🎊🍾
Likes
2
Share
Likes
3
Share
@Dmars
Follow
4/27 Day 1 of flower. Both are showing white pistil hairs so I’ll start counting flower as of today. They were getting pretty bushy so I went and did some defoliation and reworked them into the trellis net. I did accidentally supercrop one of the tops while doing that so hopefully it isn’t too much stress to cause a herm. Light at the highest point is now 630 PAR / 27.2 DLI. 5/3 Day 7 of flower. With the humidity getting much higher with spring here I decided to do another round of defoliation to keep things airy and spaced out. The fungus gnats are back in numbers so I’m trying a new approach with the sticky pads. I’m covering the entire top part of the pots to hopefully prevent them from going anywhere. Even if it doesn’t completely wipe them out it should at least keep them away from the buds as they start forming.
Likes
3
Share
Like clockwork, all three of these girls sprouted in about 3 days. I've had %100 germination with all my 42 auto beans so far. Didn't feel like any nutes were necessary. Soil mix is about 50/50 Happy Frog and Recipe 420 Bhang. Gonna run Dirty Dozen this time around with a Co2 Dispersal Canister and see if we can grow sum thiccersonz!
Likes
10
Share
@Uneasy
Follow
04.11--> Pistil appeared 6 days after changing the light pattern to 12-12. They're growing faster than I expected, won't fit in the cabin 😬 07.11--> One of the plants turned out to be male. I saw buds with pollen sacs and moved them away from the cabin. This was not nice. I will not be able to get close to the harvest amount I planned. 😔
Processing
Likes
13
Share
@Prozak
Follow
to mutch cold here 2 week with low temps at night cicle betwen 12 &16 graus in europe. maybe this is the reason of that purple orange colors (:
Likes
11
Share
Week 2 vegetation for the banana purple punch from fastbuds 420. All good at the moment, we are testing the xpert line with these girls. 1ml of master grow A+B 1ml of master root We removed the 2 lowest sets of leaves and branches. We do this because we have the girls in 7 liters and quite some plants together, so i prefer to concentrate on the main bud and only some side buds
Processing
Likes
13
Share
@MG2009
Follow
The mystery cookie males have been topped,and I will reveg them, mom is all alone, and able to stretch out a bit with more light. Temps and humidity is stable. 05/16/2018 5weeks into flowering MYSTERY COOKIE males are removed, Captains cake heavily fertilized by the twins. Mom's last day in sunlight look at her colors 05/21/2018 End of week 5 flowering, getting more outdoor pics natural daylight, very sparkly hope my camera picks them up!
Likes
77
Share
Am so chuffed with this lady . She's exceeded my expectations
Processing
Likes
10
Share
They all got topped last week and they responded very well and quickly as you can see...im going to let them grow this week and lollipop a little and maybe top next week.
Processing
Likes
7
Share
just started them out first time all organic bed grow wish me luck lol
Likes
9
Share
ALL THESE PHOTOPERIODS WILL GO IN THE 8X8 TENT ONCE THE AUTOFLOWERS ARE CHOPPED AND I WILL SWITCH THE LIGHT TO FLOWER THEM IN THERE FOR MORE ROOM FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.