73 Day 10 Weeks to Harvest

Since this will probably be her last week. I may upload the end of the week as well into this. As of today 10/16 she is day 56 or 8 weeks of flowering total

Thanks for checking out my grow. 😉👍🏼 Feel free to check out my others, and follow along for more to come. 🌿🌺

Hum wondering if plant won't get to big and if my LST is wrong

Ooooooweeeeeee they’re all doing so good even the extras that I threw in flower with out cloning are doing great .. in just 2 more weeks I’ll throw the donor plants into flower

Bueno, aquí están estas candy caramelo de Zambezaseeds, la verdad que esta genética me está gustando tienen bastante densidad y son algo chatas , los nudos están muy juntos y eso me gusta porque el cogollo compacta más a mi parecer. Sigo regulando las condiciones del ph en cada riego en 6,2 y actualmente no supera el 50% de humedad ni sube de 26 grados. Estando a finales de mayo not bad por las condiciones climáticas pensé que sería algo más complicado 🤷‍♂️. Gracias a Mars hydro y a Zambezaseeds por hacer posible estos proyectos. . Www.mars-hydro.com web: http://bit.ly/2uJAjgy ts600: http://bit.ly/3cnv0Ev code: an420 . Buenos humos fumetillas , las semanas que viene más y mejor 💪🖤.

I hope everyone's New Year is off to a great start. These two are not the tallest but sure make up for it in flower and smell. They're stacked super tight a little to close for my liking but still healthy and happy. Over all Happy

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Umstände.

Week 3 finds me a little confused, should I transplant BB2 into her final home today? What’s going on with BB1? Somethings up with her leaves. Is this the pre veg stage? Wait another week before moving them? Any help would be great. 👾 Addendum: what a crap ass week. Cal mag deficiencies, leaf miners and woke up this morning to find my gro pro co2 tub had fallen and took out one of BB3’s leaf. If anyone knows anyone who works for that company, let them know their design sucks monkey ass. Hopefully next week is easier.

Buds starting to put weight on and plant has got quite frosty really surprised with how stocky she is!

First week of flower started with a bit downs :/ leaves were hanging and I didn’t know why but some guys helped me here ❤️ changed the watering habit now. Started watering with feeding when pots were dry/light and watered until I got 5-10% runoff - next watering when pots are dry/light

Overall i would do some thing better that is all!

finally have some time for my plants. i will upload some photos and videos this week! ------------- updated again i spotted male flower on one of the branches removed it immediately (it was immature), after removal i peeled it in other room with gloves and was sure it was 100% male flower because it was not like calyx inside. its the 2nd time i find male flower on plant number 1, very strange i never saw plant only popping one random male flower. i thought plant would just be hermie and it would have a lot of male flowers. the plant is 100% female but popped random male flower again. It is late flower of this strain and i think i can handle this problem and finish that plant. Any expert ideas? any of readers encountered this problem? p.s. sorry for bad english, it is not my native.

Day 140 Wed PH 5.8 EC 0.0 DLI 12h PPFD Water 16-24cc Day 141 Thu PH 6.7 - 5.8 EC 0.0 - 0.1 DLI 12h PPFD Water 16-24cc

There all going steady this an aquaponic setup any questions or advise an comments would be appreciated happy growing!!

she is still branching, so i realized she needed ore space and put her out in a larger 4x4 tent as compare to the orignal 2'x2'. the tent has more cmlights then the single one in the smaller tent - this made the girl start to uptake nutrients such that there is very little drained to waste. i also put a screen to start scroging over her. the screen has large holes, so i think it may require high stress training to move the stems to the next section without breaking them. the data from grow rooms sensors etc gets overwhelming quickly and i can't really keep up. so i created a graphical animation visualizing for the composite garden data from the live garden sensor data. this is fun as things on the dashboard change colors and shape based on the sensor status. it is also interactive as i can also send commands to say control the lights, pump by clicking on them on the animation. . i am still using my doser to mix nutrients and then refill this garden manually. besides the plant response to the increased lighting , all other conditions i can adjust are still similar.

10/14-10/20 10/14: After lowering the temperature in the tent about 5 degrees, the leaf tip burn has stopped. This is the second time I believe I have successfully controlled the Grow Dots release rate with temperature adjustments (maybe--more experiments are needed, but it sure seems like it gives you a great amount of flexibility). The tent is crowded, but the temp/RH/VPD have been perfect (see image). Branches seem too spindly. I'm worried that the buds aren't going to fatten up enough. We'll see. Lots of time left. Still hand watering (1/2gal per day per plant) 10/16: The lower fan leaves on one plant are yellowing a lot (the left side, or "bigger" plant with the larger light). They also happen to be below the largest buds. The largest buds also happen to be closest to the light. After reading around a bit, here's what I think happened: The parts of the plant closest to the light were getting too much light, which caused the fan leaves to yellow and start to die. The DLI was close to 60 for those parts of the plant, which is WAY too high. I turned it down, and now it's around 45 for the big buds, and 35-40 for the remainder of the plant. I wish there was a way to move the larger buds further away from the light, but there's not because of space limitations. I still have some concern about the size of the buds. I think I'm going to end up with a whole bunch of apricot-sized buds and no big kahunas. It doesn't seem like it will be the yield I hoped for, and I am no sure why. A common comment in the Glookies diaries I've seen is that the yield was below expectation. Lots of time left--maybe they'll fatten up a lot. 10/16 (again): I had a little extra time today so I built a DIY CO2 generator. See video. There's some chance it will overflow and/or explode and spray yeast and sugar all over the place. I plan to watch carefully. The pump and heat mat are on a timer so that they're only going when the lights are on. 10/20: Last day of this week. I turned down the light and the leaves stopped yellowing. So, problem solved. The plants look as good as any other Glookies diary I see on here for this far along. I am using every available inch of this tent. I've been as careful as I can about keeping things spaced for airflow. Daytime temps: 78F; nighttime: 67F. Humidity staying steady at 55. I didn't water yesterday because the bags felt too wet on the bottom. The pot bases are bone dry today, so I should be good to water again tomorrow. I hit them with Recharge day before yesterday.

Powder: GREENHOUSE BIO FEEDING Line which are organic! For LIQUIDS ******GREEN BUZZ LIQUIDS***** also organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W ☀️Also special thanks to VIPERSPECTRA P2000 (200W) & XS2000(240w) LED growlights 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.

Had a pretty good weer. I have the new carbon fil by Spider farmer. Love it has a temp and hum control built in so i can really leave it undisturbed now. Had a problem with my leaves turning brown and curling. Take a look at the picture and let me know what you think or better still watch my VIDEO. This is Ghost signing out.x ✌️🏻✌️🏻