Recommended
Likes
Comments
Share
This was my first experience using Mapito and Ebb & Flow, together with the new LED light. The plant turned out to be unusually low. 👌 The variety is quite fragrant, but the smell appeared only in the middle of flowering. At the time of trimming, the plant smelled of mint candies 😁
Likes
4
Share
12/08/24 beautiful plant. buds are like mountainous structures. cant wait for harvest with this one. in the home stretch. 12/14 getting chunky. may need support
Likes
18
Share
@Rando1314
Follow
Girls are really stretching now!! I’m surprised as to how much the Dosi is outgrowing the Maui!! The genetics and overall strength of the strains are really showing at this point I believe. Gave them all another good defoliation to enhance light to cola sites and adjusting neuts to the flowering schedule. Everything is looking super healthy even the little seedling that I think turned out to be both females. Although they are super small the little they produce will be banger since it’s a lemon skunk strain. Just having happy little experiment last going on over here all for science Until next week y’all and happy farming from OH-IO
Likes
7
Share
@RizlaZA
Follow
Incredible strain this, grew hassle free from the start. Keep her healthy and give her what she needs and it will produce some dense, trich covered goodness. The smoke is Incredible but has a massive kick so be warned. Estimate these girls will be 25% THC.
Likes
14
Share
@Satax
Follow
Geeting big!! Try to defo under the back plants but very difficult to acess there…
Likes
25
Share
@MaxMo8
Follow
Harvest today 24/12/2021 After 72 hour of darkens going to dry 7 to 10 days
Processing
Likes
26
Share
Everything is going well The big blackberry is in livingsoil so water & urb only Blackberry #2 is growing strong Smoothie looks great too
Likes
33
Share
@BudXs
Follow
Plan is to take 8 photos to flower following next week, finish the autos under 2 weeks of 12/12. Will be vegging an additional 8 photos that will be ready for the flower room in 5 weeks from now. So when photo 1s are finishing, photo 2s will flip to flower. Will do a concurrent auto run at 12)12 during that time, all to be pressed to wax BudXs
Likes
13
Share
Second week of flowering in the bag, and they’re all looking really healthy, even healthier than when I first threw them in the flower steady as she goes
Likes
1
Share
Flushed for about 10 days so she faded nicely and off to drying room ,very heavy flowers covered with trichomes definitely will grow this shain
Likes
11
Share
@artems
Follow
It's worth noting that the yield of this strain turned out to be small, and the buds were loose. Even with expectations set higher, the cultivation result left much to be desired. While the plant started flowering quickly and early, it failed to accumulate significant mass, adding a sense of disappointment to the equation. Confronted with these characteristics, I no longer harbor illusions about autoflowering strains. Though the experience with "Red Mimosa XL Auto" left a bit of disappointment, I've made a decision for myself—no more autoflowers in my future plantings. It's always better to be honest about one's expectations and experiences, even if it means foregoing certain strains in the search for the perfect fit.
Likes
3
Share
more and more trichomes and the buds are getting bigger. its getting smelly.
Processing
Likes
3
Share
@Iop420
Follow
Hi guys 👋. Also this week I let the pictures and grow log to speak. Thanks for watching. Peace and patience ✌️
Likes
8
Share
Week 5 is here and these cbd 20-1 are doing well :) , they havnt give me any problems at all. Seem to be able to handle full feeds no problem .. There’s lots off bud sites that I can’t wait to see filling out :)
Likes
Comments
Share
In a 3 gallon container, I mixed - pro mix organic vegetable + Worm casting + Sea compost + 450 ml ollas (blue one)
Likes
Comments
Share
@mattoz
Follow
Equip: Spider FarmerSF 2000 Hesi Nutrients Bio Bizz Light Mix
Likes
9
Share
@Dmon013
Follow
The missing star Due to the weight and growth that is different from other numbers But she still has a highlight that is covered with snow Make us all want to have a relationship with this little girl once🍬🍒🍭❄️ This After harvest 14 Day Living soil🥦🥦 Notill💚💚💚
Likes
1
Share
Hallo liebe Grow-Community! Ich freue mich, euch heute an meinem neuen Grow-Projekt teilhaben zu lassen! Nach einiger Vorbereitung und mit viel Vorfreude habe ich mich entschieden, meine Reise mit GreenHouse Seeds NL5xHAZExKALIMIST zu dokumentieren. Dabei möchte ich nicht nur meine Fortschritte festhalten, sondern auch von eurer Erfahrung und euren Tipps profitieren. Es ist meine 1. Erfahrung, welche ich im hydropoischen Anbau sammeln darf. In diesem Report werde ich regelmäßig über die Entwicklung meiner Pflanzen berichten, angefangen bei der Keimung über die vegetative Phase bis hin zur Blüte. Ich bin gespannt, wie sich alles entwickeln wird, und hoffe, dass wir gemeinsam viel lernen und uns austauschen können. Über Feedback, Ratschläge und konstruktive Anregungen freue ich mich immer – schließlich macht das gemeinsame Growen noch mehr Spaß! Also, lasst uns starten und gemeinsam in diese spannende Reise eintauchen. Vielen Dank schon mal für eure Unterstützung und viel Spaß beim Lesen 🌱 In deiner ersten Woche der Cannabis-Keimlingsphase habe ich die Samen in Steinwolle gekeimt, die mit pH-reguliertem Wasser vorbereitet wurde. 1. Vorbereitung der Steinwolle: Die Steinwolle wurde vor dem Einpflanzen der Samen mit Wasser getränkt, dessen pH-Wert auf etwa 5,5 bis 6,0 eingestellt wurde. Dies ist der optimale pH-Bereich für die Nährstoffaufnahme in der frühen Wachstumsphase. 2. Keimung: Die Cannabis-Samen wurden in die vorbereitete Steinwolle gelegt und leicht bedeckt. Die Steinwolle hält die Feuchtigkeit gut, was für die Keimung entscheidend ist. Die Samen benötigen eine warme und feuchte Umgebung, um zu keimen, idealerweise bei Temperaturen zwischen 22°C und 25°C. 3. Erste Anzeichen des Wachstums: Innerhalb von 24 bis 72 Stunden sollten die Samen zu keimen beginnen. Die ersten Anzeichen sind die Öffnung der Samenschale und das Erscheinen der Keimwurzel (Radikel). 4. Entwicklung der Keimblätter: Nachdem die Keimwurzel sich in der Steinwolle verankert hat, beginnen sich die Keimblätter (Cotyledonen) zu entwickeln. Diese sind die ersten Blätter, die aus dem Samen sprießen und sind für die Photosynthese in dieser frühen Phase verantwortlich. 5. Licht und Feuchtigkeit: Während dieser Phase ist es wichtig, dass die Keimlinge ausreichend Licht erhalten, jedoch nicht zu intensiv, um Verbrennungen zu vermeiden. Eine dimmbare LED_Lampe - um eine geringere Intensität einzustellen - ist ideal. Die Steinwolle sollte feucht, aber nicht nass gehalten werden, um Schimmelbildung zu vermeiden. 6. Überwachung: In dieser Woche solltest du die Keimlinge täglich überwachen, um sicherzustellen, dass sie nicht austrocknen und dass keine Anzeichen von Schimmel oder Krankheiten auftreten. Am Ende der ersten Woche sollten deine Cannabis-Keimlinge gut verwurzelt sein und die ersten echten Blätter beginnen sich zu entwickeln, was den Übergang in die nächste Wachstumsphase markiert. Hello dear grow community! I am happy to share my new grow project with you today! After some preparation and with a lot of anticipation, I have decided to document my journey with GreenHouse Seeds NL5xHAZExKALIMIST. I not only want to record my progress, but also benefit from your experience and your tips. It is my first experience in hydroponic cultivation. In this report, I will regularly report on the development of my plants, starting with germination, through the vegetative phase, and finally flowering. I am excited to see how everything will develop and hope that we can learn a lot together and exchange ideas. I am always happy to receive feedback, advice and constructive suggestions - after all, growing together is even more fun! So, let's get started and immerse ourselves in this exciting journey together. Thank you for your support and happy reading 🌱 In your first week of the cannabis seedling phase, I germinated the seeds in rockwool that was prepared with pH-regulated water. 1. Preparation of the rockwool: The rockwool was soaked with water before planting the seeds, the pH of which was adjusted to around 5.5 to 6.0. This is the optimal pH range for nutrient absorption in the early growth phase. 2. Germination: The cannabis seeds were placed in the prepared rockwool and lightly covered. The rockwool holds moisture well, which is crucial for germination. The seeds need a warm and humid environment to germinate, ideally at temperatures between 22°C and 25°C. 3. First signs of growth: Within 24 to 72 hours, the seeds should start to germinate. The first signs are the opening of the seed coat and the appearance of the radicle. 4. Development of the cotyledons: After the radicle has anchored itself in the rockwool, the cotyledons begin to develop. These are the first leaves to sprout from the seed and are responsible for photosynthesis in this early phase. 5. Light and humidity: During this phase it is important that the seedlings receive sufficient light, but not too intense to avoid burns. A dimmable LED lamp - to set a lower intensity - is ideal. The rockwool should be kept moist but not wet to avoid mold growth. 6. Monitoring: During this week you should monitor the seedlings daily to make sure they do not dry out and that no signs of mold or disease appear. By the end of the first week, your cannabis seedlings should be well rooted and the first true leaves should begin to develop, marking the transition to the next growth phase. Thx
Likes
12
Share
@Luv2Grow
Follow
Overall this girl was an amazing grow. I screwed up with her early on and she looked like she was on deaths bed. The soil was too packed and I didn’t put enough perlite in the soil mix so she was re-potted twice within a couple days and once I got the soil broke up a bit, she bounced back like nothing ever happened to her. Definitely looking forward to growing this strain again.